Zitat:
Board: STb7100-mboard
U-Boot 1.1.2 (STLINUX_2_0p1) (May 30 2007 - 16:03:49)
DRAM: 32 MB
write time out = 1, clock = 40
write time out = 1, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 400
Net: VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 1 0
## Booting image at a0040000 ...
Image Name: Linux 2.6
Image Type: SH-4 Linux Kernel Image (gzip compressed)
Data Size: 1806175 Bytes = 1.7 MB
Load Address: 84401000
Entry Point: 84402000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000 - 0x00000000 - 0 ...
Linux version 2.6.11.12_stm20-33 (root@localhost) (gcc version 3.4.3 (STMicroelectronics/Linux Base 3.4.3-17) [build Sep 30 2005]) #8 Fri Jul 6 15:48:58 CEST 2007
STMicroelectronics STb7100 Marusys MSS-5000 Custom board initialisation
STb7100 version 3.x
Built 1 zonelists
Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000
st-coprocessor: Failed to reserve memory at 0x04000000
st-coprocessor: Failed to reserve memory at 0x04200000
PID hash table entries: 256 (order: 8, 4096 bytes)
PLL1 : 531.00MHz
PLL2 : 400.00MHz
ST40 CPU : 265.50MHz
ST40 BUS : 132.75MHz
ST40 PER : 66.37MHz
SLIM : 265.50MHz
ST231 : 400.00MHz
STBUS : 200.00MHz
EMI : 100.00MHz
LMI : 200.00MHz
FSYN0_CHAN1 : 108.008MHz
FSYN0_CHAN2 : 36.866MHz
FSYN0_CHAN3 : 32.768MHz
FSYN1_CHAN1 : 27.002MHz
FSYN1_CHAN2 : 150.008MHz
FSYN1_CHAN3 : 27.002MHz
FSYN1_CHAN4 : 48.000MHz
CLK_PIX_HD : 108.008MHz
CLK_PIX_SD : 27.002MHz
CLK_DISP_HD : 13.501MHz
CLK_DISP_ID : 13.501MHz
CLK_GDP2 : 27.002MHz
CLK_656 : 27.002MHz
CLK_PIPE : 150.008MHz
CLK_PP : 27.002MHz
CLK_IC_150 : 150.008MHz
CLK_DAA : 32.768MHz
CLK_DSS : 36.866MHz
CLK_LPC : 46.875KHz
CLK_BCH_HDMI : 108.008MHz
CLK_TMDS_HDMI: 27.002MHz
CLK_PIX_HDMI : 13.501MHz
CLK_DVP : VIDINCLK
CLK_RTC : 27.002MHz
Console: colour dummy device 80x25
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 24608k/32768k available (3126k kernel code, 8116k reserved, 307k data, 104k init)
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: STb710x
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
SH Virtual Bus initialized
bigphysarea: Allocated 1024 pages at 0x847df000.
Squashfs 2.2-r2 (released 2005/09/08) (C) 2002-2005 Phillip Lougher
JFFS2 version 2.2. (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
Device probe found data for platform device lirc
lirc_dev: IR Remote Control driver registered, at major 61
lirc_dev: lirc_register_plugin: sample_rate: 0
STM LIRC plugin has IRQ 125
Lirc STM: Using IRB mode
STMicroelectronics LIRC driver configured
STPIO layer initialised
Device probe found data for platform device wdt
STM watchdog initialized
STMicroelectronics ASC driver initialized
asc_init: check the clock
ttyAS0 at MMIO 0xb8032000 (irq = 121) is a asc
asc_init: check the clock
ttyAS1 at MMIO 0xb8033000 (irq = 120) is a asc
io scheduler noop registered
io scheduler anticipatory registered
io scheduler deadline registered
io scheduler cfq registered
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
nwhw_config: device not found
Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
Onboard_Flash: Found 1 x16 devices at 0x800000 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Onboard_Flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 2
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 8 MTD partitions on "Onboard_Flash":
0x00000000-0x00020000 : "Boot firmware : 0xA000.0000-0xA001.FFFF"
0x00040000-0x00200000 : "Kernel - 0xA004.0000-0xA01F.FFFF"
0x00200000-0x002a0000 : "Config FS - 0xA020.0000-0xA029.FFFF"
0x002a0000-0x004e0000 : "Root FS- 0xA02A.0000-0xA04D.FFFF"
0x004e0000-0x00ae0000 : "APP_Modules 0xA04E.0000-0xA0AD.FFFF"
0x00ae0000-0x00c00000 : "EmergencyRoot 0xA0AE.0000-0xA0BF.FFFF"
0x00c00000-0x01000000 : "OtherData 0xA0C0.0000-0xA0FF.FFFF"
0x00020000-0x00040000 : "BootConfiguration 0xA002.0000-0xA003.FFFF"
ST40_start_host_control
ST40_start_host_control proceeding
drivers/usb/host/ehci-stcore.c: ehci_hcd (ST40) at 0xb91ffe00,irq 169
ST40-ehci ST40-ehci2: new USB bus registered, assigned bus number 1
ST40-ehci ST40-ehci2: park 0
ST40-ehci ST40-ehci2: USB 0.0 initialized, EHCI 1.00, driver 10 Dec 2004
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
out
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
i2c /dev entries driver
stssc layer initialized
STMicroelectronics - Coprocessors st231 Init
st231-0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4000000 size 0x00200000
cop. addr 0x04000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231-1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4200000 size 0x00200000
cop. addr 0x04200000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
NET: Registered protocol family 2
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP established hash table entries: 2048 (order: 2, 16384 bytes)
TCP bind hash table entries: 2048 (order: 1, 8192 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
NET: Registered protocol family 1
NET: Registered protocol family 10
IPv6 over IPv4 tunneling driver
NET: Registered protocol family 17
VFS: Mounted root (squashfs filesystem) readonly.
Freeing unused kernel memory: 104k freed
usb 1-1: new high speed USB device using ST40-ehci and address 2
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 4 ports detected
init started: BusyBox v1.4.1 (2007-07-06 00:56:37 CEST) multi-call binary
/etc/init.d/rcS running...
mount
mount: no /usr/etc/mtab
mount: no /usr/etc/mtab
loadmodules
mknod: /dev/vfd: File exists
VFD_Driver Init
VFD_Controller Type : NEW Kathrein VFD
button: module license 'unspecified' taints kernel.
DVB-PVR Button Device Driver(by Marusys Co.)
drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic
usbcore: registered new driver usbserial_generic
usbcore: registered new driver usbserial
drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0
drivers/usb/serial/usb-serial.c: USB Serial support registered for PL-2303
usbcore: registered new driver pl2303
drivers/usb/serial/pl2303.c: Prolific PL2303 USB to serial adaptor driver v0.12
extract
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
rccode = 0
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
link
**** hostname
**** networks
-n Setting up IP spoofing protection:
rp_filter.
-n Configuring network interfaces...
Disabled Privacy Extensions on device 8472170c(lo)
/usr/etc/network/if-up.d/01samba-start: /usr/etc/network/if-up.d/01samba-start: 2: smbd: not found
/usr/etc/network/if-up.d/01samba-start: /usr/etc/network/if-up.d/01samba-start: 3: nmbd: not found
run-parts: /usr/etc/network/if-up.d/01samba-start exited with return code 127: Success
udhcpc (v1.4.1) started
Sending discover...
Sending select for 192.168.1.60...
Lease of 192.168.1.60 obtained, lease time 43200
route: SIOC[ADD|DEL]RT: No such process
/usr/etc/network/if-up.d/01samba-start: /usr/etc/network/if-up.d/01samba-start: 2: smbd: not found
/usr/etc/network/if-up.d/01samba-start: /usr/etc/network/if-up.d/01samba-start: 3: nmbd: not found
run-parts: /usr/etc/network/if-up.d/01samba-start exited with return code 127: Success
done.
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
inetd
start telnetd
start ftpd
start httpd
mount app
/etc/init.d/rcS: /etc/init.d/rcS: 15: /usr/etc/rcS.d/S82startserver.sh: not found
/etc/init.d/rcS: /etc/init.d/rcS: 15: /usr/etc/rcS.d/S84startkofolas.sh: not found
VFD_Driver Init
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : NEW Kathrein VFD
################################################## ########
the reference tree was released on 2006.09.08
################################################## ########
insmod /root/modules26//stapi/stos_core.ko
stos_core_init_module(): Initializing STOS Module
insmod /root/modules26//stapi/stcommon_core.ko
stcommon_core_init_module(): Initializing STCOMMON Module
Setting all Group priorities done
PTI Clock: Cut 3.0 detected -> setting PTI workaround clock.
TC_Ram test...
Writing...
Reading...
ok
Preproc Clock: Cut 3.0 detected -> setting Preproc clock.
insmod /root/modules26//stapi/stavmem_core.ko MAX_BLOCKS=450 PART_0=0xA6400000:0x01C00000:"LMI_SYS" PART_1=0xB0000000:0x04000000:"LMI_VID"
stavmem_core_init_module: Initializing STAVMEM CORE Module
Info> Number Of Partitions = 2
Info> Maximum number of memory blocks = 450
Info> Partition used for virtual mapping by default is the partition 0
Info> Device 'AVMEM' initialised
Info> Partition created on device 'AVMEM'
Info> Partition created on device 'AVMEM'
STAVMEM initialized, revision=STAVMEM-REL_4.3.1
Partition 0 "LMI_SYS" Handle=0xc019b7d8 Start 0xa6400000 Stop 0xa8000000
Partition 1 "LMI_VID" Handle=0xc019b7ec Start 0xb0000000 Stop 0xb4000000
insmod /root/modules26//stapi/stapigat.ko
Initializing STAPIGAT kernel Module
Load module stapigat[254] by exe (pid 199)
/dev/stapi/stapigat
insmod /root/modules26//stapi/stevt_core.ko
insmod /root/modules26//stapi/stfdma_core.ko
Load module fdma [253] by exe (pid 232)
insmod /root/modules26//stapi/sti2c_core.ko
insmod /root/modules26//stapi/stpio_core.ko
stpio_core_init_module(): Initializing STPIO Module
insmod /root/modules26//stapi/stmerge_core.ko
insmod /root/modules26//stapi/stpti4_core.ko
Load module stpti4_core by exe (pid 286)
insmod /root/modules26//stapi/stclkrv_core.ko
Load module stclkrv_core by exe (pid 299)
insmod /root/modules26//stapi/stdenc_core.ko
insmod /root/modules26//stapi/stvtg_core.ko
insmod /root/modules26//stapi/hdmi_i2c_core.ko
hdmi_i2c_init : Initializing I2CHDMI kernel Module
insmod /root/modules26//stapi/stvout_core.ko
insmod /root/modules26//stapi/stlayer_core.ko
insmod /root/modules26//stapi/stvmix_core.ko
insmod /root/modules26//stapi/mlxload.ko StartAddress=0x04200000
mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04200000
Load module lxload[252] by exe (pid 391)
LXLOADER virtual io kernel address of phys 0xa4200000 = 0xa4200000
/dev/stapi/lxload
loading audio binary file StartAddress=0x04200000
lxload_open: major=252 minor=0
setting up Audio LX in NON-DEBUG mode
lxload_release: major=252 minor=0
Starting Audio LX by disabling reset
LX loaded:
Base: 0xa4200000
Last: 0xa4347284
Size:1340036
mod_lxload_exit: Exiting LXLOAD kernel Module
The I/O memory region 0xa4200000 is released successfully
Unload module lxload by exe (pid 406)
insmod /root/modules26//stapi/mlxload.ko StartAddress=0x04000000
mod_lxload_init: Initializing LXLOAD kernel Module, StartAddress: 0x04000000
Load module lxload[252] by exe (pid 417)
LXLOADER virtual io kernel address of phys 0xa4000000 = 0xa4000000
/dev/stapi/lxload
loading video binary file StartAddress=0x04000000
lxload_open: major=252 minor=0
setting up LX in NON-DEBUG mode
lxload_release: major=252 minor=0
Starting video LX by disabling reset
LX loaded:
Base: 0xa4000000
Last: 0xa403cb00
Size:248576
mod_lxload_exit: Exiting LXLOAD kernel Module
The I/O memory region 0xa4000000 is released successfully
Unload module lxload by exe (pid 432)
insmod /root/modules26//mme/embxshell.ko
insmod /root/modules26//mme/embxloopback.ko
insmod /root/modules26//mme/embxmailbox.ko mailbox0=0xB9211000:136:set2 mailbox1=0xB9212000:137:set2
insmod /root/modules26//mme/embxshm.ko mailbox0=ups:0:7:0x60000000:0:16:16:0:2048:0xA4000 000:0x8000000
insmod /root/modules26//mme/mme_host.ko transport0=ups
insmod /root/modules26//stapi/stblit_core.ko
insmod /root/modules26//stapi/stvbi_core.ko
insmod /root/modules26//stapi/stvid_core.ko
stvid_core_init_module: Initializing STVID CORE Module
insmod /root/modules26//stapi/stvidtest_core.ko
stvidtest_core_init_module: Initializing STVIDTEST CORE Module
insmod /root/modules26//stapi/sti2c_ioctl.ko
/dev/stapi/sti2c_ioctl
insmod /root/modules26//stapi/sttuner_core.ko
Load module sttuner_core [251] by exe (pid 550)
insmod /root/modules26//stapi/sttuner_ioctl.ko
Load module sttuner_ioctl [250] by exe (pid 563)
/dev/stapi/sttuner_ioctl
insmod /root/modules26//stapi/staudlx_core.ko
Load module staudlx_core [249] by exe (pid 584)
insmod /root/modules26//stapi/sthdmi_core.ko
insmod /root/modules26//stapi/sthdmi_ioctl.ko
sthdmi_ioctl_init_module: Initializing STHDMI IOCTL Module
Load module sthdmi_ioctl[248] by exe (pid 611)
/dev/stapi/sthdmi_ioctl
insmod /root/modules26//stapi/stvid_ioctl.ko
stvid_ioctl_init_module: Initializing STVID IOCTL Module
Load module stvid_ioctl[247] by exe (pid 632)
/dev/stapi/stvid_ioctl
insmod /root/modules26//stapi/stvidtest_ioctl.ko
stvidtest_ioctl_init_module: Initializing STVIDTEST IOCTL Module
Load module stvidtest_ioctl[246] by exe (pid 652)
/dev/stapi/stvidtest_ioctl
insmod /root/modules26//stapi/stsmart_core.ko
Load module stsmart_core [245] by exe (pid 672)
insmod /root/modules26//stapi/stcc_core.ko
insmod /root/modules26//stapi/stttx_core.ko
Unload module stttx_core by exe (pid 698)
insmod /root/modules26//stapi/stevt_ioctl.ko
Load module stevt_ioctl [244] by exe (pid 713)
/dev/stapi/stevt_ioctl
insmod /root/modules26//stapi/stblit_ioctl.ko
stblit_ioctl_init_module: Initializing STBLIT IOCTL Module
Load module stblit_ioctl[243] by exe (pid 733)
/dev/stapi/stblit_ioctl
insmod /root/modules26//stapi/stlayer_ioctl.ko
stlayer_ioctl_init_module: Initializing STLAYER kernel Module
Load module stlayer_ioctl[242] by exe (pid 753)
/dev/stapi/stlayer_ioctl
insmod /root/modules26//stapi/stpti4_ioctl.ko
Load module stpti4_ioctl [241] by exe (pid 773)
/dev/stapi/stpti4_ioctl
insmod /root/modules26//stapi/stclkrv_ioctl.ko
Load module stclkrv_ioctl [240] by exe (pid 793)
/dev/stapi/stclkrv_ioctl
insmod /root/modules26//stapi/stdenc_ioctl.ko
stdenc_ioctl_init_module: Initializing STDENC IOCTL Module
Load module stdenc_ioctl[239] by exe (pid 813)
/dev/stapi/stdenc_ioctl
insmod /root/modules26//stapi/stvtg_ioctl.ko
stvtg_ioctl_init_module: Initializing STVTG IOCTL Module
Load module stvtg_ioctl[238] by exe (pid 833)
/dev/stapi/stvtg_ioctl
insmod /root/modules26//stapi/stvout_ioctl.ko
stvout_ioctl_init_module: Initializing STVOUT IOCTL Module
Load module stvout_ioctl[237] by exe (pid 853)
/dev/stapi/stvout_ioctl
insmod /root/modules26//stapi/stvmix_ioctl.ko
stvmix_ioctl_init_module: Initializing STVMIX IOCTL Module
Load module stvmix_ioctl[236] by exe (pid 873)
/dev/stapi/stvmix_ioctl
insmod /root/modules26//stapi/stvbi_ioctl.ko
stvbi_ioctl_init_module: Initializing STVBI kernel Module
Load module stvbi_ioctl[235] by exe (pid 893)
/dev/stapi/stvbi_ioctl
insmod /root/modules26//stapi/stmerge_ioctl.ko
Load module stmerge_ioctl [234] by exe (pid 913)
/dev/stapi/stmerge_ioctl
insmod /root/modules26//stapi/staudlx_ioctl.ko
Load module staudlx_ioctl[233] by exe (pid 933)
/dev/stapi/staudlx_ioctl
insmod /root/modules26//stapi/stsmart_ioctl.ko
Load module stsmart_ioctl [232] by exe (pid 953)
/dev/stapi/stsmart_ioctl
insmod /root/modules26//stapi/stcc_ioctl.ko
stcc_ioctl_init_module: Initializing STCC IOCTL Module
Load module stcc_ioctl[230] by exe (pid 973)
/dev/stapi/stcc_ioctl
insmod /root/modules26//stapi/stttx_ioctl.ko
Load module stttx_ioctl [229] by exe (pid 993)
/dev/stapi/stttx_ioctl
insmod /root/modules26//stapi/stblast_core.ko
Load module stblast_core [228] by exe (pid 1014)
insmod /root/modules26//stapi/stblast_ioctl.ko
Load module stblast_ioctl [227] by exe (pid 1027)
/dev/stapi/stblast_ioctl
insmod /root/modules26//stapi/stinj_core.ko
insmod /root/modules26//stapi/stinj_ioctl.ko
Load module stinj_ioctl [226] by exe (pid 1061)
/dev/stapi/stinj_ioctl
insmod /root/modules26//stapi/stpio_ioctl.ko
Load module stpio_ioctl [225] by exe (pid 1091)
/dev/stapi/stpio_ioctl
Module Size Used by
stpio_ioctl 9952 0 - Live 0xc031b000
stinj_ioctl 5724 0 - Live 0xc031f000
stinj_core 7732 1 stinj_ioctl, Live 0xc030d000
stblast_ioctl 10300 0 - Live 0xc0303000
stblast_core 47924 1 stblast_ioctl, Live 0xc0405000
stttx_ioctl 7260 0 - Live 0xc030a000
stcc_ioctl 8160 0 - Live 0xc0307000
stsmart_ioctl 17148 0 - Live 0xc0257000
staudlx_ioctl 39712 0 - Live 0xc0310000
stmerge_ioctl 6780 0 - Live 0xc0300000
stvbi_ioctl 9632 0 - Live 0xc02fc000
stvmix_ioctl 9664 0 - Live 0xc02f8000
stvout_ioctl 9632 0 - Live 0xc02f4000
stvtg_ioctl 6048 0 - Live 0xc02f1000
stdenc_ioctl 10080 0 - Live 0xc02ed000
stclkrv_ioctl 7516 0 - Live 0xc02ea000
stpti4_ioctl 156280 0 - Live 0xc03dd000
stlayer_ioctl 16804 0 - Live 0xc02e4000
stblit_ioctl 12036 0 - Live 0xc02c6000
stevt_ioctl 10457 0 - Live 0xc02c2000
stttx_core 29368 1 stttx_ioctl, Live 0xc02ca000
stcc_core 15432 1 stcc_ioctl, Live 0xc0279000
stsmart_core 57640 1 stsmart_ioctl, Live 0xc02d4000
stvidtest_ioctl 6048 0 - Live 0xc0276000
stvid_ioctl 25152 0 - Live 0xc0289000
sthdmi_ioctl 9664 0 - Live 0xc01d1000
sthdmi_core 31064 1 sthdmi_ioctl, Live 0xc0280000
staudlx_core 270268 1 staudlx_ioctl, Live 0xc039a000
sttuner_ioctl 14468 0 - Live 0xc025d000
sttuner_core 31356 1 sttuner_ioctl, Live 0xc026d000
sti2c_ioctl 4616 0 - Live 0xc01e0000
stvidtest_core 7256 1 stvidtest_ioctl, Live 0xc01d5000
stvid_core 408728 2 stvid_ioctl,stvidtest_core, Live 0xc0335000
stvbi_core 21024 3 stvbi_ioctl,stttx_core,stcc_core, Live 0xc0238000
stblit_core 188156 1 stblit_ioctl, Live 0xc0293000
mme_host 33940 2 staudlx_core,stvid_core, Live 0xc0263000
embxshm 29240 0 - Live 0xc0225000
embxmailbox 11952 1 embxshm, Live 0xc015d000
embxloopback 9056 0 - Live 0xc01ae000
embxshell 28816 6 staudlx_core,stvid_core,mme_host,embxshm,embxmailb ox,embxloopback, Live 0xc022f000
stvmix_core 22256 1 stvmix_ioctl, Live 0xc01d9000
stlayer_core 94044 4 stlayer_ioctl,stvid_core,stvbi_core,stvmix_core, Live 0xc023f000
stvout_core 65932 3 stvout_ioctl,sthdmi_core,stvmix_core, Live 0xc01e5000
hdmi_i2c_core 4848 1 stvout_core, Live 0xc018f000
stvtg_core 26756 3 stvtg_ioctl,sthdmi_core,stvout_core, Live 0xc01c2000
stdenc_core 17932 4 stdenc_ioctl,stvbi_core,stvout_core,stvtg_core, Live 0xc01a3000
stclkrv_core 22960 4 stclkrv_ioctl,staudlx_core,stvid_core,stvtg_core, Live 0xc01ca000
stpti4_core 179908 6 stinj_core,staudlx_ioctl,stpti4_ioctl,stttx_core,s tvidtest_ioctl,stclkrv_core, Live 0xc01f8000
stmerge_core 13724 2 stinj_core,stmerge_ioctl, Live 0xc01a9000
stpio_core 8624 4 stpio_ioctl,stblast_core,stsmart_core,stvout_core, Live 0xc018b000
sti2c_core 6720 2 sttuner_core,sti2c_ioctl, Live 0xc0188000
stfdma_core 52216 3 stinj_core,staudlx_core,stvid_core, Live 0xc01b4000
stevt_core 16848 17 stinj_core,stblast_core,stevt_ioctl,stttx_core,stc c_core,stsmart_core,sthdmi_core,staudlx_core,sttun er_core,stvid_core,stblit_core,stvmix_core,stlayer _core,stvout_core,stvtg_core,stclkrv_core,stpti4_c ore, Live 0xc019d000
stapigat 6088 0 - Live 0xc016d000
stavmem_core 34948 11 staudlx_ioctl,stvbi_ioctl,stlayer_ioctl,stvid_ioct l,staudlx_core,stvidtest_core,stvid_core,stvbi_cor e,stblit_core,stlayer_core,stapigat, Live 0xc0193000
stcommon_core 13184 12 stblast_core,stsmart_ioctl,stttx_core,stsmart_core ,staudlx_core,stvidtest_core,stvid_core,stvbi_core ,stvmix_core,stvout_core,stvtg_core,stpti4_core, Live 0xc0168000
stos_core 28648 45 stinj_core,stblast_ioctl,stblast_core,stttx_ioctl, stcc_ioctl,stsmart_ioctl,staudlx_ioctl,stvbi_ioctl ,stvmix_ioctl,stvout_ioctl,stvtg_ioctl,stdenc_ioct l,stclkrv_ioctl,stpti4_ioctl,stlayer_ioctl,stblit_ ioctl,stttx_core,stcc_core,stsmart_core,stvidtest_ ioctl,stvid_ioctl,sthdmi_ioctl,sthdmi_core,staudlx _core,sttuner_ioctl,sttuner_core,sti2c_ioctl,stvid test_core,stvid_core,stvbi_core,stblit_core,stvmix _core,stlayer_core,stvout_core,stvtg_core,stdenc_c ore,stclkrv_core,stpti4_core,stmerge_core,stpio_co re,stfdma_core,stevt_core,stapigat,stavmem_core,st common_core, Live 0xc0180000
pl2303 18564 0 - Live 0xc017a000
usbserial 27088 1 pl2303, Live 0xc0172000
button 5840 0 - Live 0xc0165000
vfd_driver 9676 0 - Live 0xc0161000
mknod: /dev/button: File exists
mknod: /dev/stpio_dev: File exists
mknod: /dev/vfd: File exists
the adapter name is number 0
the adapter name is number 1
<6>i2c_st40_pio: ST40 PIO based I2C Driver
i2c_st40_pio: allocated pin (4,0) for scl (0x84790cec)
i2c_st40_pio: allocated pin (4,1) for sda (0x84790cfc)
i2c_st40_pio bus 0: SCL=PIO4[0], SDA=PIO4[1]
the adapter name is ST40 (PIO based) number 2
stpio_init
insmod: cannot insert '/root/modules26/stapi/vfd_driver.ko': File exists (-1): File exists
CIMAX DeviceInit
SysConf device Init
LMI_SYS VCR0 = 00d40000
LMI_SYS VCR1 = 0f041000
LMI_SYS MIM0 = 861a0247
LMI_SYS MIM1 = 01010022
LMI_SYS SCR = 00000000
LMI_SYS STR = 35b06455
LMI_SYS COC = 00000000
LMI_SYS SDRA0 = 08001900
LMI_SYS SDRA1 = 08001900
LMI_SYS CIC = 00000249
LMI_SYS SDMR0 = 00000000
LMI_SYS SDMR1 = 00000000
LMI_VID VCR0 = 00d40000
LMI_VID VCR1 = 17101000
LMI_VID MIM0 = 861a0247
LMI_VID MIM1 = 01010022
LMI_VID SCR = 00000000
LMI_VID STR = 35b06455
LMI_VID COC = 00000000
LMI_VID SDRA0 = 14001900
LMI_VID SDRA1 = 14001900
LMI_VID CIC = 00000249
LMI_VID SDMR0 = 00000000
LMI_VID SDMR1 = 00000000
EMI_BANK0_CFG0 = 001016d1
EMI_BANK0_CFG1 = 9d200000
EMI_BANK0_CFG2 = 9d220000
EMI_BANK0_CFG3 = 00000000
EMI_BANK1_CFG0 = 001016d1
EMI_BANK1_CFG1 = 9d200000
EMI_BANK1_CFG2 = 9d220000
EMI_BANK1_CFG3 = 00000000
insmod: cannot insert '/root/modules26/stapi/button.ko': File exists (-1): File exists
TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000
CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000
CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=32m bigphysarea=1024 coprocessor_mem=2m@0x04000000,2m@0x04200000
Danke im vorraus!