Client UFS910 mit AAF Sun und MBOX wie??

Hi wenn ich das Cam Starte wird es wenn ich auf einen Sky Channel binn sofort wieder beendet..

Meine UFS hat die IP 192.168.178.50
Der Server ist über Dyndns verfügbar. port 15000 auf dem Server läuft camd3
Ich habe die camd3.config so bearbeitet

# Wenn Parameter gebraucht wird - '#' (Kommentarzeichen) entfernen und eure Werte reinsetzen!!!!!
#
#
#
# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500,
# 5-dm56xx/Triax, 7-elanvision, 9-server only, 10-relook, 11-dm600
# 12-ufs910, 13-dm800
# Default is 9 - server only
BOXTYPE=13
#
# UDP Port(optional); Defailt - 20248
#UDP_PORT=24110
# UDP Host(optional); Defailt - any
#UDP_HOST=192.168.0.1
# HTTP Port(optional); Defailt - 9080 ( 0: HTTP-server ausgeschaltet)
#HTTP_PORT=9080
# HOST Host(optional); Defailt - any
#HOST_HOST=192.168.0.1
# HTTP Login: Default - admin:camd3
#HTTP_ADMIN=admin
#HTTP_PASSWORD=camd3
# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
#LOG=2
# descrambler delax in ms
#DESCR_DELAY=500
# Host f?r UDP-logging
#LOG_HOST=192.168.1.1
# Port f?r UDP-logging(optional); Default ist 514
#LOG_PORT=514
# DNS cache in sekunden; Default ist 60 sec
#DNS_CACHE=60

# Logfile
#LOG_FILE=/mnt/hdd/var/log/camd3.log
# AU f?r original Slot dbox2 (optional): 1-ein, 0-aus; Default ist 1
#DBOX2_AU=0
# Kartenslots (anzahl beliebig)
# je eine Zeile f?r Slot:
# SLOT=devicename:type:au_g:au_s:au_u:port:username: password(carddetect):deskey
#
# deskey f?r normale Slots ist optional, aber port,username und password m?ssen immer angegeben werden!!!
#
# f?r die Kartenleser(aber nicht multicam f?r dbox2) statt password, CTS oder CAR eingeben (carddetect - default - CAR)
#
# devicename: Pfad (volst?ndig) zum Device, oder Hostname von cardserver(newcamd) - /dev/ttyS0...9 f?r win32-version
# type: 1-serial, 2-intern(dreambox, elanvision, tripledragon), 4-cardserver(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: 15000
# username: mustermnann
# password: passwort
# deskey: cardserver deskey (14 byte)
#SLOT=/dev/tts/0:1:1:1:1:997:com1:CAR
#SLOT=/dev/ttyS0:1:1:1:1:997:com1:CTS
#SLOT=/dev/sci0:2:1:1:1:999:slotunten:password3
#SLOT=/dev/sci1:2:1:1:1:998:slotoben:password2
#SLOT=localhost:4:1:1:1:22222:mustermann.dyndns.or g:010203040 5060708091011121314
#SLOT=/dev/cardreader1:2:1:1:1:998:slotoben:password2

Diese Config hat nix mit Mbox zu tun, Die cwahare.cfg und mbox.cfg währen interessanter.

sry habe beide in betrieb ohne erfolg
an der mbox.cfg habe ich nichts geändert.
cwshare.cfg
# allow maximum 06 share level for recieved card data
I: { 04 }
# 01 repeat EMM's
# 00 consider every EMM only once
# 01 restart pid on overflow
# 1* reset ENX on every channel change
# *1 check/reset ENX freezes on FTA
# *2 check/reset ENX freezes on *****
# *3 check/reset ENX freezes on FTA and *****
# 00 write nothing in atack.txt
# 01 write into atack.txt: password is wrong
# 02 write into atack.txt: ID unknown
# 04 write into atack.txt: IP is wrong
# 08 write into atack.txt: port is worng
# 10 write into atack.txt: share.stat
# 20 create online.log for online/offline logging
# 3F write everything. (combine bits for other combinations)
# 4000 send ecm again after 4 Seconds if no reply.
# 6000 resync decode after 6 Seconds if net decode failed
N: { 00 01 03 1F 3000 5000 }
# Send ECM's at maximum 5 cards (please use this as default)
X: { 05 }
# Send ECM's in any case to these card ID's, even they are more then X:
# some examples ...
#G: { 17020000 1235 }
O: { 2000 2000 }
# For W: please read the cwshare.txt, here only some examples
# use card 1 only for the following pids
#W: { 01 02 02 } 1022 100A 100B 102B 1009 101D 1029 1014 1011 101B
# don't use card 2 for the following pids
#W: { 02 03 03 } 1008 1016
# S: is the same as W:, just using the SID instead of the ECMPID
# cwshare.cfg --- ufs910 --- internet and local network
#
# password
M: { 192.168.178.50 { FA5BDEFE }}
#M: { mustermann.dyndns.org { 7005 8006 { FA1BC9F9 { A3 A3 }}}}
# Internet Friends port range password cod
#G: { friend1.homeip.net { 8010 8010 { B142AB11 { 5 5 }}}}
#G: { friend2.homelinux.net { 8010 8010 { 81BFF901 { 5 5 }}}}
# other local boxes
G: { 192.168.0.17 { 2499 2499 { 20000001 { 5 5 }}}}
#G: { 192.168.0.52 { 8020 8020 { BA334B24 { 5 5 }}}}
#G: { 192.168.1.11 { 2499 2499 { BA334B24 { 5 5 }}}}
wo wird denn das passwort und username eingetragen
mbox.cfg
//mbox.cfg EXPLANATION and EXAMPLES
A: { 0 } // for QBoxHD receivers or for any receivers if needed it
//A: { x }
//Choose adapter path
//x=0 -> /dev/dvb/adapter0/
//x=1 -> /dev/dvb/adapter1/
//x=2 -> /dev/dvb/adapter2/
//x=.. -> .......
//default x=0
D: { 0 }
//D: { x }
//x=0 -> disable
//x=1 -> enable dbox2 cw writing
//x=2 -> enable STAPI for IPBOX
//x=3 -> enable STAPI for Kathrein
//x=4 -> enable Linux DVB API for Kathrein
//x=5 -> enable triple dragon
//x=6 -> enable Qbox HD
//default disabled
B: { 0 }
//B: { x }
//x=0 -> disable local UDP ports 8004-80xx ,this ports are used with DVB cards and gbox plugin (Windows and Linux)
//x=1 -> enable
//default disabled
Z: { 12 } { 127.0.0.1 8000 }
// Z option -> control sending/writing current informations
// Z: { xy } { IP port }
// x=0 -> don't print time stamp (in console screen and in debug file)
// x=1 -> print time stamp ( .... )
// y=0 -> no writing/sending informations to debug file/destination IP
// y=1 -> send informations to destination IP but not in debug file
// y=2 -> write informations to debug file but don't send to destination IP
// y=3 -> write/send informations to debug file/destination IP
// IP port -> destination IP and UDP port where to send informations
// no default
#C: { 127.0.0.1 7999 }
// C option -> control receiving some command messages localy or from another IP
// C: { IP port }
// IP-> your local IP or you DNS
// port -> on what port you will be waiting command messages
// no default
U: { 1 }
// U options -> Update peer(s) IP if it changes while peer still resending ecm's/cw etc.. information
// default only on hello message peer(s) IP are updated !!!
// U: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
L: { 1 }
// L option -> how mbox to menage virtual card(s) with level 0
// ( only for peer(s) who have and can reshare virtual cards but don't want to use LEVEL 0 card(s) for them self)
// L: { x }
// x=0 -> don't load any virtual cards with LEVEL 0, you can't use them for your self
// x=1 -> load all virtual cards with LEVEL 0 ,you will be using them for your self
// default 1
#G: { /hdd/ }
//G option -> redirect writing ONLY debug.txt file to internal or external HDD in receivers or for any other reason.
//Remove #, ONLY if you want to use this option !!!!!!!
T: { /tmp/ }
// T option -> where to store temp files ... (share.info,debug.txt ,etc.)
// T: { folder_path_to_files, example: T: { /tmp/ } }
K: { /var/keys/ }
// K option -> where is cwshare.cfg,mbox.prio file
// K: { folder_path_to_files, example: K: { /var/keys/ } }
M: { 1 }
// M option -> Mode option
// M: { x }
// x=0 -> local mode no NET
// x=1 -> NET mode
// default 0
P: { /tmp/pmt.tmp }
// P option -> PMT location (Dont used with linux and windows)
// you must be tuned to channel so image can generate this file
// { /tmp/pmt.tmp } for receivers and images that create this file <- use this if you can
// { /tmp/pmtX.tmp } X-> number -> pmt1.tmp ......
// { 1/tmp/camd.socket } for enigma 1
// { 2/tmp/camd.socket } for enigma 2
W: { 0 }
// W option -> write raw ECM to ecm.raw file
// W: { x }
// x=0 -> disabled
// x=1 -> enabled
// default disabled
Q: { 300 }
//Q option -> newcamd connect retry in sec.
//Q: { x }
// default 300 sec.
F: { 500 }
//F option -> reset writing debug.txt from begining if file size is higher then (x)(KB)
//F { x } -> decimal in KBytes
//default 500 KB
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
//V: { card_type device clock inverse_Reset}
#V: { 3 1 3571200 0 }
#V: { 3 2 3571200 1 }
// card_type:
// Seca 3 , Irdeto 4, Conax 5, Cryptoworks 6, Viaccess 7, NDS 8, Nagravision 9
// device:
// COM1/ttyS0 1
// COM2/ttyS1 2
// /dev/sci0 3
// /dev/sci1 4
// /dev/usb/tts/0 5
// /dev/usb/tts/1 6
// /dev/tts/0 7
// /dev/tts/1 8
// /dev/ttyUSB0 9
// /dev/ttyUSB1 10
//clocks for COM ports in Hz
//for SCI slots use this values
// 1 - 3.33 Mhz
// 2 - 3.63 Mhz
// 3 - 4 Mhz
// 4 - 4.44 Mhz
// 5 - 5Mhz
// 6 - 5.71 Mhz
// 7 - 6.66 Mhz
// 8 - 8 Mhz
//Inverse Reset
// 1 -yes
// 0 -no
///DO NOT USE THIS ,NOT TESTED !!!!!!!!//
J: { 1 }
// J option -> enable adding betacrypt header to N3 ECM for Premier
// J { x }
// x = 0 -> disabled
// x = 1 -> enabled
R: { 3600 }
// R option -> resend hello to all peers after X seconds, ony for gboxx peers,not mbox peers
//default in code 3600 seconds
H: { 0 0 0 0 0 0 }
// H option -> mapping provid (0-disabled, 1-enabled)
//H: { a b c d e f }
//a-> mapping all 0BXX to 0B00
//b-> mapping 1810 to 1801
//c-> mapping 1803 to 1801
//d-> mapping 1802 to 1801
//e-> mapping 1815 to 1801
//f-> mapping 1822 to 1801
S: { COM1 }
//S option -> enable sssp protocol
//S: { x }
//x=COM1
//x=COM2
//x=/dev/ttyS0
//x=/dev/ttyS1

Im AAF Sunrise wird die Mbox online als Addon angeboten,dabei gibt es eine 04.023 und ene 06.10 er Version,Du musst entscheiden welche Du nimmst,anhängig von de was Dein "Partner" hat,lade Dir Die und passe dann nur noch die cwshare.cfg entsprechend an

Ich habe ja die neuste aus dem AAF heruntergeladen.

Ich wüßte ja gerne was ich wo anpassen muss????

Auf dem Server läuft camd3

Mbox kann nicht mit Camd3
Warum nimmst Du nicht die Camd3 ,die ist als Addon auf dem AAF Server ???