HD01 Karte wird nicht in der Quadmouse erkannt
Hallo zusammen,
habe an einem Raspberry PI (512MB Version), eine Quadmouse über einem aktiven USB Hub hängen, auf dem PI ist Oscam 1.20 SVN 10660 installiert.
In der Quadmouse stecken 4 Karten unter anderem auch die HD01, Karte ist freigeschaltet und in der Box mit CCCam 2.3.0 läuft sie auch.
Habe auch schon andere Slots ausprobiert und die einstellungen an der Quadmouse durch, aber egal wie ich es anstelle, sie will nicht.
Googeln hat mich auch nicht weiter gebracht. Villeicht einer eine Idee.
Hier die Config für die Karte :
[reader]
label = HDplus
description = HD01
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
boxkey = A7:ANYWORD:7C
rsakey = BF:ANYWORD:D5
detect = cd
nagra_read = 1
mhz = 600
cardmhz = 368
group = 2
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-s = 1
Das steht immer im Log :
2015/05/14 10:39:31 1401878 h (reader) HDplus [mouse] Restarting reader
2015/05/14 10:39:31 1401878 h (reader) HDplus [mouse] creating thread for device /dev/ttyUSB0
2015/05/14 10:39:31 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75205
2015/05/14 10:39:31 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75199
2015/05/14 10:39:31 1411C28 r (reader) HDplus [mouse] Reader initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=368)
2015/05/14 10:39:31 1411C28 r (reader) HDplus [mouse] card detected
2015/05/14 10:39:31 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75220
2015/05/14 10:39:33 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75209
2015/05/14 10:39:34 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75195
2015/05/14 10:39:35 1411C28 r (reader) HDplus [mouse] Error activating card.
2015/05/14 10:39:35 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75314
2015/05/14 10:39:37 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75332
2015/05/14 10:39:38 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75196
2015/05/14 10:39:39 1411C28 r (reader) HDplus [mouse] Error activating card.
2015/05/14 10:39:39 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75208
2015/05/14 10:39:41 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75202
2015/05/14 10:39:42 1411C28 r (reader) HDplus [mouse] Buffers readed 0 bytes total time_us 75198
2015/05/14 10:39:43 1411C28 r (reader) HDplus [mouse] Error activating card.
2015/05/14 10:39:43 1411C28 r (reader) HDplus [mouse] THIS WAS A FAILED START ATTEMPT No 1 out of max alloted of 1
2015/05/14 10:39:43 1411C28 r (reader) HDplus [mouse] card initializing error
Jetzt weiss ich erstmal nicht weiter:frown2:
CChaos
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Hi,
meine beiden HD01 laufen in der Quadmouse so mit udev Regeln
[reader]
label = hd1
description = # 1.Maus 3.Schacht
protocol = mouse
device = /dev/hd1
lb_whitelist_services = hdplus
caid = 1830
boxkey = bekannt
rsakey = bekannt
ecmwhitelist = 1830:92
ecmheaderwhitelist = 80308F078D,81308F078D
detect = cd
mhz = 369
cardmhz = 369
group = anpassen
emmcache = 1,1,2,0
blockemm-unknown = 1
lb_weight = 300
Die fetten Zeilen mußt Du anpassen, hochtakten bei der HD01 bringt nix
EMM' s blocken & speichern ist ebenfalls Käse. Block unknown ist OK.
Grüße
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Danke für den Tip,
hatte aber auch nichts gebracht. Den Übeltäter habe ich mittlerweise gefunden.
Es war das mitgelieferte UDB Kabel, das habe ich gegen ein stabileres ausgetauscht.
Jetzt läuft alles so wie es soll.
CChaos
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Zitat:
Zitat von
CChaos
[reader]
.....
blockemm-unknown = 1
blockemm-u = 1
blockemm-s = 1
blockemm-g = 1
saveemm-s = 1
Das macht bei einer HD+(HD01) Karte überhaupt keinen Sinn.
Daher auch deine Probleme mit der Aktivierung.
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Bei meiner quadmouse waren schon 2 kabel defekt...
AW: HD01 Karte wird nicht in der Quadmouse erkannt
UNGLAUBLICH !!!!
nachdem ich das mitgelieferte Originalkabel gewechselt habe funktioniert die HD01 am Slot 1 ohne Probleme !!!!
Danke an fassbier & den anderen für den Tip :38:
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Hänge mich mal hier ran: Wenn ich mehr als 4 Karten sharen möchte, könnte ich dann an einem Raspberry PI und aktivem Hub auch 2 Quadmouse hängen? Welche Alternativen gibt es?
Betreibe derzeit 6 Karten in drei DB8000. Ist für mich aber nicht so komfortabel. Alles in einem wäre schon besser und übersichtlicher.
CU rqs
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Hi,
ich habe 3 Quadmäuse direkt am Igel. Anstatt Raspberry PI kaufe Dir
besser eine Igel oder Pogoplug, da brauchst Du keinen aktiven Hub.
Grüße
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Das mit dem Pogoplug hört sich interessant an. Ist es egal welchen ich nehme, Pro, Series 4? Gibt es zum Einrichten ein Howto?
CU rqs
AW: HD01 Karte wird nicht in der Quadmouse erkannt
Hi,
bei Pogoplug geht E02 (256MB Ram) oder Pro (512 MB Ram). Ich persönlich persönlich
stehe nicht auf OS auf USB Stick. Wenn Dir 15 W Strom Unterschied es egal sind, nimm einen
Igel.
http://www.ebay.de/itm/IGEL-IGEL-H70...p2047675.l2557
Dazu noch eine 4 GB Compact Flash Karte ( ca. 10 Euro)
Debian & IPC installieren und Du kannst 100 clients bedienen.
Grüße