D-Box 2 Kabel mit MC -> D02 Karte ?
Hi @ll!
Ist es möglich in meiner Nokia D-Box 2 Kabel meine D02 Karte im Multicam zu betreiben ?
Wenn ja, welche gBox Version brauch ich denn dazu ? Und wie muss die Config aussehen ?
Habe derzeit in meiner D-Box 2 ne An****a Karte drin die Problemlos als 3.83er erkannt wird. Nur die D02 erkennt er nicht. Hat da jemand nen Tip ?
Hier mal meine Config:
Zitat:
#gbox config file
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don´t use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.100.190 8010
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
J: { 02 03 00 00 00 }
# PPC files,folders,devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0 // ca device
#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
#F: { 23 } /dev/dvb/adapter0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw´s (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot2
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
#gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 don´t show any ECM´s
# 01 show only valid ECM´s
# 02 show valid and bad ECM´s with complete data display
C: { 01 }
# Display EMM messages on Konsole
# 00 don´t show any EMM´s
# 01 show only valid EMM´s
# 02 show valid and bad EMM´s with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 00 }
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 01 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 01 } 192.168.100.230
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.100.190 8017
# Use SSSP over rs232 port
# a0 a=1 debug on, a=0 normal operatiuon
# 0b b=1 for com1, b=2 for com2
# Option for Seasons-Interface
W: { 00 00 } 9600
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW´s, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x*8) invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { 00 02 }
Bin für jeden Tip dankbar.
Gruß
Bender3k
