Fehler beim Image flashen
Hallo,
ich komme beim flashen irgendwie nicht weiter :boese-traurig0159: :boese-traurig0159:
Boot-Vorgang erkannt, warte auf PPCBoot... und es geht nicht weiter
Hier mal ein Auszug
debug: DDF: Calibrating delay loop... debug: DDF: 66.76 BogoMIPS
debug: BMon V1.0 mID 02
debug: feID 00 enxID 03
debug: fpID 52 dsID 01-53.73.94.07.00.00-fc
debug: HWrev 01 FPrev 0.30
debug: B/Ex/Fl(MB) 32/00/08
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.0.1, My IP 192.168.0.10
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
debug: Sending TFTP-request for file C/Programme/Dbox2 Bootmanager/ppcboot_write
flash
debug:
TFTP failed, giving up...
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/philips-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 143000
verify sig: 262
Branching to 0x40000
U-Boot 0.4.0 (TuxBox) JFFS2 only (Aug 15 2003 - 16:44:21)
CPU: PPC823ZTnnB2 at 66 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBox2, Phillips -- Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
LCD: ready
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
Scanning JFFS2 FS: ......... done.
### FS (jffs2) loading 'var/tuxbox/boot/logo-lcd'
### FS (jffs2) loading 'var/tuxbox/boot/logo-fb'
### FS (jffs2) loading 'var/tuxbox/boot/ppcboot.conf'
### FS (jffs2) loading 'var/tuxbox/boot/u-boot.conf'
### FS (jffs2) loading 'vmlinuz'
.................................................. .............
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 599504 Bytes = 585.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.22-dbox2 (tuxbox@debian) (gcc version 3.2.3) #3 Di Dez 2 14:38
:26 CET 2003
Jffs2-only Skars-Kernel mit NFS/CIFS/SMB Module-Support folgender
Aufteilung:128k BRbootloader,128k flfs(ppcboot),7936k root(jffs2)
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: root=/dev/mtdblock2 rw console=ttyS0
Decrementer Frequency = 247500000/60
mpc8xx-wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
mpc8xx-wdt: keep-alive trigger activated (PITC: 0x2000)
Console: colour dummy device 80x25
Calibrating delay loop... 65.74 BogoMIPS
Memory: 30936k available (1036k kernel code, 336k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (2002081 Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.1. (C) 2001, 2002 Red Hat, Inc., designed by Axis Communications
AB.
i2c-core.o: i2c core module
CPM UART driver version 0.03
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0380 is a SMC
pty: 256 Unix98 ptys configured
eth0: CPM ENET Version 0.2 on SCC2, 00:50:9c:2d:19:fd
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit mode
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Using word write method
Creating 5 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "flfs (ppcboot)"
0x00040000-0x00800000 : "root (jffs2)"
0x00020000-0x00800000 : "flash without bootloader"
0x00000000-0x00800000 : "complete flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (jffs2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.00-pre3 (2003.12.04-12:22+0000) multi-cUsing /lib/modu
les/2.4.22-dbox2/misc/event.o
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/tuxbox.o
Using /lib/modules/2.4.22-dbox2/misc/dvb-core.o
Using /lib/modules/2.4.22-dbox2/misc/dbox2_i2c.o
[i2c-8xx]: mpc 8xx i2c init
i2c-core.o: adapter PowerPC 8xx I2C adapter registered as adapter 0.
[i2c-8xx]: adapter: 0
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp.o
i2c-core.o: driver DBox2 Frontprocessor driver registered.
Using /lib/modules/2.4.22-dbox2/misc/lcd.o
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
i2c-core.o: client [DBox2 Frontprocessor client] registered to adapter [PowerPC
8xx I2C adapter](pos. 0).
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_input.o
Using /lib/modules/2.4.22-dbox2/misc/avs.o
i2c-core.o: driver i2c audio/video switch driver registered.
i2c-core.o: client [STV6412] registered to adapter [PowerPC 8xx I2C adapter](pos
. 1).
Using /lib/modules/2.4.22-dbox2/misc/saa7126.o
i2c-core.o: driver saa7126 registered.
i2c-core.o: client [saa7126] registered to adapter [PowerPC 8xx I2C adapter](pos
. 2).
Using /lib/modules/2.4.22-dbox2/misc/cam.o
$Id: cam.c,v 1.28 2003/10/16 08:44:10 alexw Exp $
i2c-core.o: driver DBox2-CAM registered.
CAM: attaching CAM at 0x6e
i2c-core.o: client [DBOX2-CAM] registered to adapter [PowerPC 8xx I2C adapter](p
os. 3).
CAM: attached to adapter PowerPC 8xx I2C adapter
Using /lib/modules/2.4.22-dbox2/misc/dvb_i2c_bridge.o
Using /lib/modules/2.4.22-dbox2/misc/avia_napi.o
$Id: avia_napi.c,v 1.16 2003/07/24 01:59:22 homar Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
i2c-core.o: driver DVB I2C bridge registered.
i2c-core.o: client [dvb] registered to adapter [PowerPC 8xx I2C adapter](pos. 4)
.
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
[LCDFONT] initializing core...Using /lib/modules/2.4.22-dbox2/misc/cam_napi.o
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/dbox2_fp_napi.o
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
Using /lib/modules/2.4.22-dbox2/misc/avia_av.o
avia_av: $Id: avia_av_core.c,v 1.79 2003/10/16 08:42:20 alexw Exp $
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.11 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt.o
avia_gt_core: $Id: avia_gt_core.c,v 1.43 2003/10/08 19:54:24 obi Exp $
avia_gt_core: autodetecting chip type... eNX
avia_gt_enx: $Id: avia_gt_enx.c,v 1.21 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.18x 2003/12/04 12:55:35 skars Exp $
avia_gt_dmx: loaded ucode v0014
avia_gt_dmx: warning, misaligned queue 0 (is 0x32A00, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.37 2003/09/30 05:45:35 obi Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.28 2003/09/30 05:45:35 obi Exp $
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_proc.o
avia_gt_proc: $Id: avia_gt_proc.c, v 0.1.3 2003/09/25 12:24:00 Skars & Merandos
Exp $
avia_gt_proc: Description: GTX/ENX proc_dev Driver with proc_fs extension
options:
(demux reinit) enx_reset=1
(framer chan.) fc_reset=1
(clr avia reg) avia=0
(enx td trace) trace=0
(lock, unlock) spinlock=0
Schreiben ueber avia_gt.o
(delay) delay=10
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_fb.o
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.52 2003/11/06 14:25:59 tklamm Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_lirc.o
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_oss.o
avia_oss: $Id: avia_gt_oss.c,v 1.23 2003/09/30 05:45:35 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_v4l2.o
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
Vendor: 2
Model: Philips
Using /lib/modules/2.4.22-dbox2/misc/tda8044h.o
DVB: registering frontend 0:0 (TDA8044H QPSK Demodulator)...
Using /lib/modules/2.4.22-dbox2/misc/avia_av_napi.o
avia_av_napi.c: $Id: avia_av_napi.c,v 1.25 2003/09/12 03:01:51 obi Exp $
Using /lib/modules/2.4.22-dbox2/misc/avia_gt_napi.o
avia_gt_napi: $Id: avia_gt_napi.c,v 1.188 2003/09/30 05:45:35 obi Exp $
cdkVcInfo $Id: cdkVcInfo.c,v 1.0 2002/09/26 20:48:26 alexW Exp $
$Id: sectionsd.cpp,v 1.167 2003/06/18 12:19:23 alexw Exp $
caching 504 hours
events are old 60min after their end time
$Id: zapit.cpp,v 1.338emu 2003/12/04 12:01:01 Streamboard Exp $
Imageversion in Ordnung
[zapit] Using EMU ...
$Id: controld.cpp,v 1.110 2003/10/21 22:48:25 zwen Exp $
[controld] Boxtype detected: (2, Philips D-BOX2)
[nhttpd] Neutrino HTTP-Server starting..
[neutrino] NeutrinoNGEMU $Id: neutrino.cpp,2003/12/04 Streamboard Exp $
[neutrino] frameBuffer Instance created
1024k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] enable flash
[neutrino] Software update enabled
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Micron/Regular)
[neutrino] vcrControl Instance created
CVCRControl registered new serverdevice: ngrab
[neutrino] menue setup
loading locales: scandir: No such file or directory
[neutrino] registering as event client
[sectionsd] getUTC: read: Connection timed out
[sectionsd] getUTC: read: Connection timed out
Weiss jetzt nicht was ich machen soll
Gruss CafeMemphis
