Kanal zur Zeit nicht verfügbar SAT Box

Moin,

hi ich weiß diese Thema gibt es schon öfter aber ich muss trotzdem nochmal fragen.

Daten:

Nokia Dbox 2 Sat Avia 600

Hab vor paar tagen das letzte mal noch TV geschaut und die Box ganz normal runtergefahren, getsern Abend startet ich die Box und auf einmal kommt jetzt immer die Fehlermeldung KANAL ZUR ZEIT NICHT VERFÜGBAR.
Signalwerte zeigts z.B. bei ZDF an BER 0, SIG 57*** habe auch achon neues Image geflasht und Kanalsuchlauf gemacht hilft alles nichts.
Ne andere Dbox2 SAT mit dem selben Image/Settings/Einstellungen funktioniert tadellos.
Ist der Tuner nun defekt oder was könnte es denn sein?:confused2:

Hallo, bei mir war das lnbp20 kaputt, ist auch in den meisten Fällen so. Das der Tuner kaputt ist glaube ich nicht. Ich habe meine Box eingeschickt und 3 Tage später war sie wieder bei mir. Und das alles für 20€ plus 6,90€ Rückporto. Wenn du willst, kann ich dir die Adresse gerne geben.

Gruß Andreas

Zitat:

Zitat von pockenmusch

Mit Sicherheit aber nicht bei einer Nokia, weil es den IC da gar nicht gibt.
@Ruffnick
Liegt am Antenneneingang noch Spannung an (sollten 13V bzw. 18V sein)?
Poste mal ein Bootlog.

Hi,

hmm du hab da leider keine Ahnung von hab auch nichts zum messen da, und wie mach ich ein Bootlog? Aber wie gesagt ne andere Dbox2 läuft einwandfrei

hab jetzt noch ein Prob mann mann,

und zwar wollt ich eben den bootlog auslesen über den bootmanager hab alles verbunden start gedrückt jetzt hat er auf einmal ein altes Image geflasht.

Nun bleibt die Box immer beim Bild Keyw*** I**** U-Boot 1.1.4 hängen habe probiert neu zu flashen mit nullmodemkabel und netzwerkkabel aber es kommt immer dann diese meldung im bootmanager:

Das ist nur ausgelesen ohne versuch des flashens:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-24.15.80.07.00.00-5a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 154948
verify sig: 262
Branching to 0x40000

U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS LOAD ERROR<0> for vmlinuz!
.................................................. .............
Un-Protected 63 sectors
## Booting image at 00100000 ...
Bad Magic Number
=>

Das mit nullmodemkabel versucht zu flashen:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-24.15.80.07.00.00-5a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0032

will verify ELF image, start= 0x800000, size= 154948
verify sig: 262
Branching to 0x40000

U-Boot 1.1.4 (Tuxbox) (Apr 10 2006 - 22:44:42)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: .... done.
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /D/Dbox.toolz/Keywelt_V1_Januar_2x_SQUASHFS_2009.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

Retry count exceeded; starting again
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5

so gehts dann immer weiter, die selbe meldung kommt auch mit netzwer und nullmodemkabel

Hi, hier mal ein kompletter Bootlog ich hoffe das nützt was:

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-24.15.80.07.00.00-5a
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036

will verify ELF image, start= 0x800000, size= 163276
verify sig: 262
Branching to 0x40000

U-Boot 1.2.0 (Tuxbox) (Jan 18 2009 - 11:05:47)

CPU: PPC823ZTnnB2 at 67.100 MHz: 2 kB I-Cache 1 kB D-Cache
Board: DBOX2, Nokia, BMon V1.2
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ...... done.
env: found "console" with value ttyS0
env: found "lcd_inverse" with value 0
env: found "lcd_contrast" with value 15
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET

Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
### FS (squashfs) loading 'vmlinuz' to 0x100000
### FS load complete: 670280 bytes loaded to 0x100000
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 670216 Bytes = 654.5 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
Linux version 2.4.36.6-dbox2 (image@Server) (gcc version 3.4.6) #8 So Jan 18 11:
06:21 CET 2009
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0,9600 dbox_duplex= root=/dev/mtdblock2 rootfst
ype=squashfs
Decrementer Frequency = 251625000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x2580)
Console: colour dummy device 80x25
Calibrating delay loop... 66.76 BogoMIPS
Memory: 30824k available (1140k kernel code, 344k data, 60k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:44:11:78
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs+lzma)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.7.2 (2009-01-18 11:12:15 CET)

##### Image-Version: Keywelt_Jan2009_V1 #####

Sun Jan 18 11:29:00 UTC 2009
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2
insmod: preferring module /var/lib/modules/dvb-core.o
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.6-dbox2/misc/dbox2_fp_input.o was compiled for kerne
l version 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.6-dbox2/misc/avia_av.o was compiled for kernel versi
on 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
avia_av: $Id: avia_av_core.c,v 1.99 2006/01/08 21:36:22 carjay Exp $
avia_av_core: Starting avia_av_wdt thread.
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $
avia_gt_core: autodetecting chip type... GTX
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Exp $
avia_gt_dmx: $Id: avia_gt_dmx.c,v 1.210 2004/06/26 16:08:15 carjay Exp $
avia_gt_core: masking unhandled irq reg 1 bit 11
avia_gt_core: masking unhandled irq reg 1 bit 13
avia_gt_ucode: loaded ucode v0014
avia_gt_ucode: ucode section filters disabled.
avia_gt_dmx: warning, misaligned queue 0 (is 0xFD200, size 65536), aligning...
avia_gt_gv: $Id: avia_gt_gv.c,v 1.39 2004/08/28 16:44:56 carjay Exp $
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_pcm: $Id: avia_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
insmod: warning: kernel-module version mismatch
/lib/modules/2.4.36.6-dbox2/misc/ves1820.v12.o was compiled for kernel v
ersion 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
DVB: registering frontend 0:0 (VES1893)...
avia_av_napi.c: $Id: avia_av_napi.c,v 1.33 2004/03/11 15:30:27 derget Exp $
avia_gt_napi: $Id: avia_gt_napi.c,v 1.203 2005/01/05 05:49:56 carjay Exp $

Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.283 2009/01/
15 09:31:39 seife Exp $
[sectionsd] Caching max 1500 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.414k 2008/12/29 07:00:00 Kroki & Worschter & SnowHead Exp $
[zapit] MAX_SOCKETS=3
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0
/var/plugins/operations camd_start
insmod: warning: kernel-module version mismatch
/var/modules/multicam.o was compiled for kernel version 2.4.36-dbox2
while this kernel is version 2.4.36.6-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
starte scam
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
/tmp/currentservices.xml: No such file or directory
$Id: controld.cpp,v 1.132 2008/12/25 16:35:46 houdini Exp $

[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] format: 4:3(LB)
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[yhttpd] Webserver starting...
/var/plugins/operations sect_renice
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
[sectionsd] getUTC: read: Connection timed out
starting /bin/neutrino
[neutrino] frameBuffer Instance created
812k video mem
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
[neutrino] Software update enabled
[neutrino] enable flash
[lcdd] time-skin not found -> using default...
[lcdd] weekday-skin not found -> using default...
[lcdd] date-skin not found -> using default...
[lcdd] month-skin not found -> using default...
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/12.pcf.gz...OK (Fix12/Regular)
[LCDFONT] adding font /share/fonts/14B.pcf.gz...OK (Fix14/Bold)
[LCDFONT] adding font /share/fonts/15B.pcf.gz...OK (Fix15/Bold)
[LCDFONT] Intializing font cache...
[LCDFONT] FTC_Face_Requester (Fix14/Bold)
/dev/input/event1: No such file or directory
[neutrino] menue setup
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
[neutrino] can not use input repeat on fd_rc[0]: 22 (Invalid argument)
[neutrino] setRepeat: delay=150 period=125 use kernel-repeat: no
[neutrino] received 32 sats
[neutrino] registering as event client
[basicsocket] send_data: Resource temporarily unavailable
[basicsocket] send_data: Resource temporarily unavailable
[controld] setting VideoFormat to auto
[controld] format: 4:3(LB)
[neutrino] no file /var/tuxbox/config/init.end was found
[neutrino] initialized everything
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!
[sectionsd] getUTC: read: Connection timed out
[dmx.cpp:read:184] read(fd, buf, n): Connection timed out
zap failed!

Zitat:

Zitat von pockenmusch

Im Log sehe ich nichts, was einen Hardwarefehler eingrenzen könnte.
Um eine messtechnische Untersuchung wirst du nicht herumkommen.

Hmm Mist da hörts bei mir auf, die gute alte Dbox ist hier in meiner neuen Wohnung gerade mal 10 mal maximal gelaufen :(:159:

www.irata.de da wird dir geholfen

Zitat:

Zitat von Satfan123

www.irata.de da wird dir geholfen

Hi, jo bloss müsste halt wissen ob es sich lohnt weil wenn das ganze 50 euro kostet ist es nicht gerade lohnenswert, deswegen wollte ich halt mal nachfragen ob jemand weiß was es sein könnte.