PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : dbox2 startet nicht



Fred666
26.05.07, 17:22
Hallo!

Nach Flash des Images bootet die dbox2 nicht mehr. Verschiedene Sportster Images probiert. dbox2 hat keine HDD. Kann wer weiterhelfen bzw. hat jemand ähnliche Probleme gehabt? Danke im voraus.

---- Hier das Log -----

debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.2 mID 01
debug: feID dd gtxID 0b
debug: fpID 5a dsID 01-c4.f6.81.07.00.00-68
debug: HWrev 09 FPrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed

Flash-FS bootstrap loader (v1.5)

Found Flash-FS superb
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FSfstype=squashfs
debug: Got Block #0036
VFS: Mounted r

will verify ELF image, start= 0x800000, size= 162920
avi
Decrementer Frequency = 251625
verify sig: 2621 20:02:29 carj
Branching to 0x40000


U-Boot 1.1.6 (Tuxbox) (Nov 16 2006 - 19:32:15)dt: active wdt found (SWTC: 0xFFFF, SWP: 0x1):

CPU: PPC823ZTnnB2 at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
avia_gt_core: $Id: avia_gt_core.
Board: DBOX2, Nokia, BMon V1.2ive trigger installed (PITC: 0
Watchdog enabledd: eve
I2C: ready
DRAM: 32 MB
FLASH: 8 MBnsole: colou
Scanning JFFS2 FS: ... done.e... GTXnt.c,v 1.12 2003/
FB: ready
LCD: ready
In: serial
Calibrating
Out: serial 66.76 BogoMI
Err: serial_gtx.c,v 1.24
Net: SCC ETHERNET

Options:
1: Console on nul
### FS (squashfs) loading 'vmlinuz' to 0x100000

### FS load complete: 787062 bytes loaded to 0x100000 bytes)
.................................................. ............. done
Inode cache hash table
Un-Protected 63 sectors, 16384 bytes)
## Booting image at 00100000 ...
DVB: register
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)on Swansea University Computer Society NET3.039
Data Size: 786998 Bytes = 768.6 kB
avia_gt_gv: set_input_size (width=720,
Load Address: 00000000
Initializing
Entry Point: 00000000c.c
zone(0): 8192 pages.p ty
zone(1): 0 pages.
JF
zone(2): 0 pages.NAND) (C) 2001-20
Kernel command line: console=ttyS0 root=/dev/mtdblock1 rootfstype=squashfsVersion 0.2.dbox2 on SCC2, 00:50:9c:44:ec:55
Decrementer Frequency = 252000000/60_gv: set_input_mode (mode=2)e sectio
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
loop: loaded (max 8 devices)set_input
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
D-Box 2 flash driver (size->0x8
Console: colour dummy device 80x25
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
0x00020000-0x00800000 : "Flash without bootl
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)"Complete Flash"ViA eNX/GTX driver
POSIX conformance testing by UNIFIXnux video capture interface: v1.00v
Linux NET4.0 for Linux 2.4
Based upon Swansea University Co$Id

devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
devfs: boot_options: 0x1
deb
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
VFS: Mounted root (squashfs filesystem) readonly.
squashfs: version 3.0 (2006/03/15) Phillip Lougherug: HWrev 09 FPrev 0.81b0: AV
i2c-core.o: i2c core module version 2.6.1 (20010830) 32
Freein
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
lcd.o: init lcd
CPM UART driver version 0.042.1 (2006.11.01-21:46+0000)
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
debug:
debug: Transmitting B
pty: 256 Unix98 pt
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
$Id: cam_napi.c,v 1.8 2003/09/30 05:45:34 obi Exp $U: PPC
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
avia_av: $Id: avia_av_core.c,v 1.99 20
Creating 6 MTD partitions on "D-Box 2 flash memory":n V1.2ogoMIPS
0x00000000-0x00020000 : "BR bootloader"
W
0x00020000-0x00480000 : "root (squashfs)"ead. ready mID 01
0x00480000-0x007e0000 : "var (jffs2)"AM: 32 MB
de
avia_av_e
0x007e0000-0x00800000 : "flfs (u-boot)"0
In: serial
TCP: Hash tables configured (established 2048 bind 4096)
avia_gt_gv: set_input_size (width=720, height=576)HE
Linux IP multicast router 0.06 plus PIM-SM
zone(1): 0 pages.ons:
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.a_gt_pcm.c,v 1.29 2004/01/29 19:38:20 zwen Exp $oot
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
[i2c-8xx]: adapter: 0_gt_pig.c,v 1.40 2003
Vendor: Nokia5 o580)
Model: D-BOX2
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
lcd.o: found KS0713/SED153X lcd interfaceice dri
$Id: avia_napi.c,v 1.18 2003/11/24 09:53:01 obi Exp $
avia_gt_
DVB: registering new adapter (C-Cube AViA GTX/eNX with AViA 500/600).
dvb_i2c_bridge: enabled DVB i2c bridge to PowerPC 8xx I2C adapter 2003/09/30 05:45:35 obi Exp $ND) (C) 2001-2003 Red H
$Id: cam_napi.c,v 1.8 2003/09/30 05:45
avia_av_event: $Id: avia_av_event.c,v 1.11 2003/10/26 16:32:51 obi Exp $
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp
avia_av_proc: $Id: avia_av_proc.c,v 1.14 2004/01/21 20:02:29 carjay Exp $
avia_gt_core: $Id: avia_gt_core.c,v 1.48 2004/12/20 01:01:22 carjay Exp $boxtype,v1.06 07.05.2006 12:20.00 fernsehassInode cache hash table
avia_gt_core: autodetecting chip type... GTX

debug: feID dd
avia_gt_gtx: $Id: avia_gt_gtx.c,v 1.24 2003/09/30 05:45:35 obi Exp $ID 01-c4.f6.81.07.00.00-68by U
avia_gt_accel: $Id: avia_gt_accel.c,v 1.19 2003/09/30 05:45:35 obi Ex
debug: HWrev 09 FPr
Journalled
avia_gt_ucode: loaded ucode v001401: Er
avia_gt_ucode: ucode section filters disabled.
devfs: v1.12c (20020818) R
avia_gt_pcm_set_rate(44100)
avia_gt_capture: $Id: avia_gt_capture.c,v 1.32 2003/09/30 05:45:35 obi Exp $
avia_gt_pig: $Id: avia_gt_pig.c,v 1.40 2003/09/30 05:45:35 obi Exp $
avia_gt_vbi: $Id: avia_gt_vbi.c,v 1.26 2003/08/01 17:31:22 obi Exp $
avia_gt_core: Loaded AViA eNX/GTX driver
avia_gt_fb: $Id: avia_gt_fb_core.c,v 1.54 2004/03/17 18:42:18 zwen Exp $
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
avia_gt_gv: set_input_mode (mode=2)
avia_gt_gv: set_input_size (width=720, height=576)
Console: switching to colour frame buffer device 82x32
avia_gt_fb: fb0: AViA eNX/GTX Framebuffer frame buffer device
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
avia_gt_lirc: $Id: avia_gt_lirc.c,v 1.14 2003/09/30 05:45:35 obi Exp $
avia_gt_ir: $Id: avia_gt_ir.c,v 1.30 2003/09/30 05:45:35 obi Exp $
avia_oss: $Id: avia_gt_oss.c,v 1.26 2004/05/31 22:56:02 carjay Exp $
avia_gt_pcm_set_rate(44100)
avia_gt_v4l2: $Id: avia_gt_v4l2.c,v 1.12 2003/09/30 04:54:03 obi Exp $
[boxtype.cpp] boxtype,v1.06 07.05.2006 12:20.00 fernsehass
avia_gt_core: masking unhandled irq reg 0 bit 6

Fred666
26.05.07, 18:10
was passiert wenn du ein anderes image versuchst ?

schon probiert ? Keywelt oder MD zb.


Hallo!

Danke für die Antwort. Hab das Problem bereits gefunden. Während des startes müssen über das Display Eingaben gemacht werden, was mit einem defekten LCD-Display nicht so leicht zu finden ist.

Danke
lg