Archiv verlassen und diese Seite im Standarddesign anzeigen : Oscam als Server + Oscam als Client
Wscam ist ein Schreibfehler, soll Oscam heißen:gruebel:
Da ich mir einen ET 9200 zugelegt habe und dort den den ccoscam_pmod v1.0,ist die oscam 1.2 7798 und die cccam 2.3.0 enthalten, installiert habe,läuft wunderbar, möchte nun 2 UFS 901 mit Titanit übers I-Net sharen, möchte oscam einsetzen um auf der Serverbox auf Oscam zugreife.Hoffe ich habe keinen Denkfehler. Wie wären die Einstellungen der config,server Dateien.
Hi, so könnte die server aussehen. In der config mußt dvbapi einschalten. Du kannst auch mit anderen Emus auf Oscam zugreifen.
[reader]
Label = Sky
Protocol = newcamd
Device = XXXXXXXXXX,50251
User = test
Password = pass
Key = 0103050709111315171921232527
Group = 1
Server läuft ja schon,ist ccoscam_pmod v1.0,ist die oscam 1.2 7798,kann mit der enthaltenen cccam die v14 lesen.Mir geht es ja darum,was muß in die oscam.config und oscam server ,sodaß die clientboxen mit oscam darauf zugreifen können,ebenso,was muß in die oscamclientboxen,eingetragen werden.
Hi,
Hier ein Schaubild wo du was eintragen musst.
http://s7.directupload.net/images/130217/ee8npcat.jpg
Muß da nicht noch die dydns adresse rein und wo ?
DNS kommt anstatt der IP.
Die Zeichnung ist wohl ein bischen älter, account funktioniert nicht mehr mit den neuesten Versionen, oder nicht immer, dafür benutzt man :
user = xxxxxx
password = xxxxxxx
Welche Oscam wäre die richtige für die Clientenbox UFS 910 ? Habe hier eine ( oscam-svn8372-sh4-amino-webif-Distribution),wie muß diese konfiguriret werden als Client.
Hi, ist doch im Bild erklärt, mit Camd 3 Protokoll. Mein Beispiel ist für newcamd.
Ja richtig,aber ich wollte auf oscam (Serverbox)verbinden
Ja, ist der linke Teil. Mit der config kannst du die " Daten " über verschiedene Protokolle verteilen. Mit der server holst du dir die " Daten ", entweder direkt vom Cardreader oder über remote reader. Mit der user kannst du festlegen, wer, was bekommt.
Für die Clintbox erstellst du dann als Remote Reader.
Zeig mal deine Configs dann kann man sich die mal ansehen wie weit du bist ?
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablelog = 1
logfile = /dev/null
unlockparental = 1
nice = -1
waitforcards = 0
preferlocalcards = 1
lb_mode = 1
lb_retrylimit = 1600
[cccam]
port = 12001
version = 2.3.0
reshare = 2
[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
monlevel = 1
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255.255.0
# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.user.txt
[account]
user = cccam
pwd = cccam
group = 1,2,3
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_sky_v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BFxxxxxxxxxxxxxD5
boxkey = A7xxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
boxkey = A7xxxxxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd03
enable = 0
protocol = internal
device = /dev/sci0
smargopatch = 1
caid = 1860
rsakey = 90xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxB7
boxkey = A7xxxxxxxxxxxxx7C
detect = cd
nagra_read = 2
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_kabelbw_v23
enable = 0
protocol = internal
device = /dev/sci0
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
[reader]
label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2
[reader]
label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_sky_v14
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxD5
boxkey = A7xxxxxxxxxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
boxkey = A7xxxxxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd03
enable = 0
protocol = internal
device = /dev/sci1
smargopatch = 1
caid = 1860
rsakey = 90xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxB7
boxkey = A7xxxxxxxxxxxxxxxxx7C
detect = cd
nagra_read = 2
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
[reader]
label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_kabelbw_v23
enable = 0
protocol = internal
device = /dev/sci1
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
[reader]
label = line_cccam
enable = 0
protocol = cccam
device = 192.168.178.1,12000
user = user
password = password
inactivitytimeout = 0
reconnecttimeout = 0
fallback = 1
group = 3
cccversion = 2.3.0
[reader]
label = line_newcamd
enable = 0
protocol = newcamd
device = 192.168.178.1,35000
key = 0102030405060708091011121314
user = user
password = password
fallback = 1
group = 3
[reader]
label = reader-22
enable = 0
protocol = cccam
device =
inactivitytimeout = 0
das ist die config,server und user, ccoscam_pmod auf dem server.
wo hast du die Config den ausgegraben.
Poste bitte mal die Oscam.config, Oscam.server und Oscam.user vom Server und Client dann können wir dir helfen.
Das ist die oscam config,user,server vom,wie schon geschrieben, Image ET 9200 alliance 1,ccoscam_pmod. die von den clienten,will ich noch einrichten,es sind 2 Boxen UFS 910,die Oscam muß ich noch rausfinden,die dort am besten läuft,Image Titanit 1.24.
Hi, dann mußt du ein cccam remote reader in der server beim Client aktivieren, vermute ich. Und beim Server user accounts. anlegen.
[cccam]
port = 12001
version = 2.3.0
reshare = 2
Edit.
[reader]
Label = CCcamRemote1
Protocol = cccam
Device = xxxx,12001
User = user
Password = pwd
cccreshare = 2
ccckeepalive = 1
Group = 1
Dies sind die oscam.server,oscam.config und die oscam.user der Serverbox ( Xtrend ET 9200) mit
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablelog = 1
logfile = /dev/null
unlockparental = 1
nice = -1
waitforcards = 0
preferlocalcards = 1
lb_mode = 1
lb_retrylimit = 1600
[cccam]
port = 12001
version = 2.3.0
reshare = 2
[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
monlevel = 1
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255.255.0
# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.user.txt
[account]
user = cccam
pwd = cccam
group = 1,2,3
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_sky_v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BFxxxxxxxxxxxxxD5
boxkey = A7xxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
boxkey = A7xxxxxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd03
enable = 0
protocol = internal
device = /dev/sci0
smargopatch = 1
caid = 1860
rsakey = 90xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxB7
boxkey = A7xxxxxxxxxxxxx7C
detect = cd
nagra_read = 2
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_kabelbw_v23
enable = 0
protocol = internal
device = /dev/sci0
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
[reader]
label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2
[reader]
label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_sky_v14
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxxxxD5
boxkey = A7xxxxxxxxxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BFxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxD5
boxkey = A7xxxxxxxxxxxxx7C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd03
enable = 0
protocol = internal
device = /dev/sci1
smargopatch = 1
caid = 1860
rsakey = 90xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxxxxB7
boxkey = A7xxxxxxxxxxxxxxxxx7C
detect = cd
nagra_read = 2
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
[reader]
label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_kabelbw_v23
enable = 0
protocol = internal
device = /dev/sci1
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
[reader]
label = line_cccam
enable = 0
protocol = cccam
device = 192.168.178.1,12000
user = user
password = password
inactivitytimeout = 0
reconnecttimeout = 0
fallback = 1
group = 3
cccversion = 2.3.0
[reader]
label = line_newcamd
enable = 0
protocol = newcamd
device = 192.168.178.1,35000
key = 0102030405060708091011121314
user = user
password = password
fallback = 1
group = 3
[reader]
label = reader-22
enable = 0
protocol = cccam
device =
inactivitytimeout = 0
und dies der clientbox mit oscam 8006 v. 19878
oscam.config
################## General Instruction - oscam.conf ####################
# #
# per default no changes from the user are needed #
# but verify the IP-range oh your local Network #
# #
################################################## ##########################
[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout = 3
ClientMaxIdle = 120
CacheDelay = 120
BindWait = 5
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
#LogFile = /var/keys/oscam.log
#usrfile = /var/keys/oscam_usr.log
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[dvbapi]
enabled = 1
au = 1
boxtype = duckbox
user = dvbapi
pmt_mode = 0
######## end of file ########
oscam.server
############### General Instruction - oscam.server ###################
# To activate/deactivate the reader set enable = 1/0 #
# #
# You might specify further entries in each reader section #
# such as "caid =________" and/or "services = _________" but you needn´t #
# For further details see the OSCAM documentation #
################################################## ##########################
######################### Internal Readers ###############################
# Default Config should work with Seca, Conax, Cryptoworks, Viaccess, NDS #
# #
# For Irdeto, Betacrypt just activate "cardmhz=600" by removing the "#" #
# #
# For Nagra activate and set the correct "rsakey = " and "boxkey = " #
# examples for HDplus HD02 and Sky S02 are included #
# #
# for other Smartcards see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
Label = HD+ (Kartenschacht) (schwarze Karte)
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1843
cardmhz = 368
mhz = 368
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
Label = HD+ (Kartenschacht) (weisse Karte)
Protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = SKY-DE S02 (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702,1833
cardmhz = 600
mhz = 600
[reader]
enable = 0
label = SKY-DE V13 (Kartenschacht)
protocol = internal
device = /dev/sci0
detect = CD
group = 1
emmCache = 1,1,2
CAID = 09C4
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
label = SKY-DE V14 (Kartenschacht)
Protocol = internal
Device = /dev/sci0
Detect = CD
Group = 1
EMMCache = 1,1,2
CAID = 098C
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
Label = MTV (Kartenschacht)
protocol = internal
detect = CD
device = /dev/sci0
group = 1
emmcache = 1,1,2
services = mtv
caid = 0B00
Mhz = 368
cardmhz = 368
[reader]
enable = 0
Label = FreeXTV (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
services = srg
caid = 0500
mhz = 357
cardmhz = 368
[reader]
enable = 0
label = SRG (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
Group = 1
mhz = 357
cardmhz = 357
CAID = 0500
deprecated = 1
[reader]
enable = 0
Label = ORF ice (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0648
force_irdeto = 1
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE670 8AAF97C985CBA8A6C13826963BD3092EB9FC72F773A4307247 06AA5E1D14E1747842D32069A12D
boxkey = 1122334455667788
mhz = 600
cardmhz = 600
#deprecated = 1
[reader]
enable = 0
Label = ORF alt (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0D05
#ident = OD05:000000,000004,00000C,000008,000010
mhz = 368
cardmhz = 368
[reader]
enable = 0
label = skyitalia (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 09CD
boxid = 1412F60A
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = tivusat (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
Label = KabelD D02 (Kartenschacht)
Protocol = internal
Device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
mhz = 600
cardmhz = 600
CAID = 1722,1834
[reader]
enable = 0
Label = KabelD G09 (Kartenschacht)
device = /dev/sci0
Protocol = internal
detect = cd
group = 1
mhz = 357
cardmhz = 357
caid = 09C7
emmcache = 1,1,2
boxid = 12345678
[reader]
enable = 0
label = Unitymedia UM02 (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1838
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = Unitymedia I12 (Kartenschacht)
protocol = internal
device = /dev/sci0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722
cardmhz = 600
mhz = 600
[reader]
enable = 0
label = Kabel BW (Kartenschacht)
protocol = internal
device = /dev/sci1
caid = 098E
detect = cd
boxid = 12345678
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = cyfraplus (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 0100
group = 1
emmcache = 1,1,2
mhz = 357
cardmhz = 357
[reader]
enable = 0
label = tnk (Kartenschacht)
protocol = internal
device = /dev/sci0
caid = 0b00
group = 1
emmcache = 1,1,2
#################### External Readers / SMARGO ########################
# Important !!!! Use SMARGO Firmware 1.4 or 1.5 #
# With regard to your Smartcard set up the Reader/Smargo as follows: #
# #
# For Seca, Conax, Cryptoworks, Viaccess, NDS, Nagra #
# Frequency Fixed 3,69 Mhz / Normal / T=0 / EGT = 0 #
# #
# For Irdeto, Betacrypt #
# Frequency Fixed 6,0Mhz / Normal / T=1 / EGT = 0 #
# #
# If SMARGO ist in Autoswitch mode, than activate fitting mhz/cardmhz- #
# Entries in the reader-Section #
# # #
# For Nagra activate and complete the "rsakey = " and "boxkey = " and #
# and remove the # in the smargopatch = 1 line #
# example for HDplus is included #
# #
# for specific Smartcards such as TIGER or Viaccess with AES-Key #
# see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
label = HD+ (externer Kartenleser) (weisse Karte)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1830
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = HD+ (externer Kartenleser) (schwarze Karte)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
smargopatch = 1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
mhz = 357
cardmhz = 357
[reader]
enable = 0
label = SKY-DE S02 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1702,1833
mhz = 600
cardmhz = 600
[reader]
enable = 0
label = SKY-DE V13 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
detect = CD
group = 1
emmCache = 1,1,2
CAID = 09C4
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
label = SKY-DE V14 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
Detect = CD
Group = 1
EMMCache = 1,1,2
CAID = 098C
boxid = 12345678
Mhz = 357
cardmhz = 357
blockemm-g = 1
#ins7e11 = 15
[reader]
enable = 0
label = ORF ice (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0648
force_irdeto = 1
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE670 8AAF97C985CBA8A6C13826963BD3092EB9FC72F773A4307247 06AA5E1D14E1747842D32069A12D
boxkey = 1122334455667788
mhz = 600
cardmhz = 600
#deprecated = 1
smargopatch = 1
[reader]
enable = 0
label = ORF alt (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 0D05
#ident = OD05:000000,000004,00000C,000008,000010
mhz = 368
cardmhz = 368
smargopatch = 1
[reader]
enable = 0
label = SRG (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
Group = 1
mhz = 357
cardmhz = 357
CAID = 0500
deprecated = 1
smargopatch = 1
[reader]
enable = 0
Label = FreeXTV (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
services = srg
caid = 0500
mhz = 357
cardmhz = 368
[reader]
enable = 0
Label = MTV (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
detect = CD
group = 1
emmcache = 1,1,2
caid = 0B00
Mhz = 368
cardmhz = 368
[reader]
enable = 0
label = skyitalia (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 09CD
boxid = 1412F60A
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = tivusat (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = cyfraplus (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 0100
group = 1
emmcache = 1,1,2
detect = CD
[reader]
enable = 0
label = tnk (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 0b00
group = 1
emmcache = 1,1,2
detect = CD
[reader]
enable = 0
label = KabelD D02 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
mhz = 600
cardmhz=600
CAID = 1722,1834
smargopatch=1
[reader]
enable = 0
Label = KabelD G09 (externer Kartenschacht)
protocol = mouse
device = /dev/ttyUSB0
detect = cd
group = 1
mhz = 357
cardmhz = 357
caid = 09C7
emmcache = 1,1,2
boxid = 12345678
[reader]
enable = 0
label = Unitymedia UM02 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1838
cardmhz = 357
mhz = 357
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
[reader]
enable = 0
label = Unitymedia I12 (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
emmcache = 1,1,2
detect = CD
group = 1
caid = 1722
cardmhz = 600
mhz = 600
[reader]
enable = 0
label = Kabel BW (externer Kartenleser)
protocol = mouse
device = /dev/ttyUSB0
caid = 098E
detect = cd
boxid = 12345678
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
######################### Remote Readers ##############################
# Important !!!! Use this or not in personal responsibility #
# #
# No support in AAF Forum !!! #
# #
# For further details see the OSCAM documentation #
################################################## ##########################
[reader]
enable = 0
label = cccam-reader (Cardsharing)
protocol = cccam
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11
[reader]
enable = 0
label = camd35-reader (Cardsharing)
protocol = camd35
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
[reader]
enable = 0
label = newcamd-reader (Cardsharing)
protocol = newcamd
key = 0102030405060708091011121314
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
######## end of file ########
oscam.user
################## General Instruction - oscam.user ####################
# #
# per default no changes from the user are needed #
# #
################################################## ##########################
[account]
user = dvbapi
pwd = dvbapi
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702
######## end of file ########
Was müßte ich jetzt ändern,das die Clientbox sich auf die Serverbox verbinden kann.
Hi, den mußt du einschalten und die Daten anpassen.
[reader]
enable = 1
label = cccam-reader (Cardsharing)
protocol = cccam
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11
das muß auf die Serverbox in die oscam.server und was muß auf der Clientbox geändert werden ? Was könnte alles in der Serverbox in der oscam.server auskommentiert werden ?
was sagt emmcache = 1,1,2 , cccmaxhop = 5 , group = 1 aus ?
Das muß beim Client gemacht werden. http://www.streamboard.tv/wiki/Kategorie:OSCam
Hier nochmal die geänderten Dateien vom Server, die oscam.user,config.
# oscam.user generated automatically by Streamboard OSCAM 1.00-unstable_svn-ymodv18-t20 build #0
# Read more: http://streamboard.gmc.to/oscam/browser/trunk/Distribution/doc/txt/oscam.user.txt
[account]
user = cccam
pwd = cccam
group = 1,2,3
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
[account]
user = mxxxx
pwd = pxxxx
hostname = xxxxx.no-ip.info xxxxx
group = 1,2,3
au = 1
betatunnel = 1833.FFFF:1702
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
oscam config
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablelog = 1
logfile = /dev/null
unlockparental = 1
nice = -1
waitforcards = 0
preferlocalcards = 1
lb_mode = 1
lb_retrylimit = 1600
[cccam]
port = 12001
version = 2.3.0
reshare = 2
[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
monlevel = 1
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
von der Clientbox,die oscam.user,config
################## General Instruction - oscam.user ####################
# #
# per default no changes from the user are needed #
# #
################################################## ##########################
[account]
user = mxxxx
pwd = pxxxxx
hostname = xxxxx.no-ip.info xxxxx
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702
######## end of file ########
oscam.config
################## General Instruction - oscam.conf ####################
# #
# per default no changes from the user are needed #
# but verify the IP-range oh your local Network #
# #
################################################## ##########################
[global]
Nice = -1
ClientTimeout = 7
FallbackTimeout = 3
ClientMaxIdle = 120
CacheDelay = 120
BindWait = 5
WaitForCards = 1
PreferLocalCards = 1
LogFile = stdout
saveinithistory = 1
readerrestartseconds = 5
#LogFile = /var/keys/oscam.log
#usrfile = /var/keys/oscam_usr.log
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
[dvbapi]
enabled = 1
au = 1
boxtype = ufs910
user = dvbapi
pmt_mode = 0
######## end of file ########
Hi, und die server vom Client ?
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7965
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = hd+_(kartenschacht)_(schwarze_karte)
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = hd+_(kartenschacht)_(weisse_karte)
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = sky-de_s02_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = sky-de_v13_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-g = 1
[reader]
label = sky-de_v14_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-unknown = 1
blockemm-g = 1
[reader]
label = mtv_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
services = mtv
caid = 0B00
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = freextv_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
services = srg
caid = 0500
detect = cd
mhz = 357
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = srg_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
deprecated = 1
[reader]
label = orf_ice_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 0648
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE670 8AAF97C985CBA8A6C13826963BD3092EB9FC72F773A4307247 06AA5E1D14E1747842D32069A12D
force_irdeto = 1
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = orf_alt_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = skyitalia_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 09CD
boxid = 1412F60A
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = tivusat_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = kabeld_d02_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 1722,1834
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = kabeld_g09_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = unitymedia_um02_(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7642F57BC96D37C
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = unitymedia_i12__(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 1722
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = kabel_bw___(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci1
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = cyfraplus__(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 0100
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = tnk___(kartenschacht)
enable = 0
protocol = internal
device = /dev/sci0
caid = 0B00
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = hd+_(externer_kartenleser)_(weisse_karte)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = hd+_(externer_kartenleser)_(schwarze_karte)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = sky-de_s02_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 1702,1833
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = sky-de_v13_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-g = 1
[reader]
label = sky-de_v14_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
blockemm-g = 1
[reader]
label = orf_ice_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 0648
rsakey = DF57B08C0F13E67BD17AD37EAAF4EAA25393F8A0EFE8ACE670 8AAF97C985CBA8A6C13826963BD3092EB9FC72F773A4307247 06AA5E1D14E1747842D32069A12D
force_irdeto = 1
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = orf_alt_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 0D05
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = srg_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
deprecated = 1
[reader]
label = freextv_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
services = srg
caid = 0500
detect = cd
mhz = 357
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = mtv_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 0B00
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = skyitalia_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 09CD
boxid = 1412F60A
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = tivusat_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 183D
rsakey = A92DA72FEEACF2947B003ED652153B189E4043B0138C368BDF 6B9ED77DDAD6C0761A2198AEB3FC97A19C9D01CA769B3FFFE4 F6E70FA4E0696A8980E18D8C58E11D817121346E3E66457FDD 84CFA72589B25B538EFC304361B54845F39E9EFA52D805E5FD 86B595B366C35716ABC91FA3DC159C9F4D8164B5
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = cyfraplus_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 0100
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = tnk_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 0B00
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = kabeld_d02_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
smargopatch = 1
caid = 1722,1834
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = kabeld_g09_(externer_kartenschacht)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 09C7
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = unitymedia_um02_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 1838
boxkey = A7642F57BC96D37C
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = unitymedia_i12_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 1722
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,1,2
[reader]
label = kabel_bw_(externer_kartenleser)
enable = 0
protocol = mouse
device = /dev/ttyUSB0
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,1,2
[reader]
label = cccam-reader_(cardsharing)
enable = 0
protocol = cccam
device = IP/dyndns
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccversion = 2.0.11
cccmaxhops = 5
[reader]
label = camd35-reader_(cardsharing)
enable = 0
protocol = camd35
device = IP/dyndns
user = USER
password = PASS
group = 1
emmcache = 1,1,2
[reader]
label = newcamd-reader_(cardsharing)
enable = 0
protocol = newcamd
device = IP/dyndns
key = 0102030405060708091011121314
user = USER
password = PASS
group = 1
emmcache = 1,1,2
Anderer Gedanke, wäre eine mgcamd 1.38 auf der Clientbox UFS 910 die bessere und einfache Lösung,könnte man sich dann über das Newcamd Protokoll auf der Oscam verbinden ?
Das geht natürlich auch, wie schon mal angesprochen, kann man mit fast jeder Cam auf Oscam zugreifen. Den CCcam reder mußt du einschalten und die Daten anpassen.
[reader]
label = cccam-reader_(cardsharing)
enable = 0
protocol = cccam
device = IP/dyndns
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccversion = 2.0.11
cccmaxhops = 5
Habe versucht erstmal ein home cs einzustellen,über oscam als server und oscam als client,funzt nicht,bekomme es einfach nicht hin.
Habe soviel gelesen,bin ganz durch den Wind,hoffe trotzdem auf Hilfe.
So nochmal von vorne,möchte erstmal Home CS probieren und wenn dann das funktioniert, CS übers I-Net.
Serverbox ist Xtrend ET 9200 mit Alliance 1 E 2 Image.habe darauf den Oscam Mod ccoscam_pmod am laufen,mit einer V14 funktioniert wunderbar. Clientbox UFS 910 mit Titanit 1.24 mit Oscam 8006.
Habe auf dem Server in der oscam.server unter reader,cccam, die IP des Servers und den Port der cccam eingetragen.Was muß ich auf der Clientbox, in die oscam.user und oscam.config eintragen,das sie sich verbinden kann?
Purzelpreis
23.02.13, 14:14
Hi,
oscam auf igel und 19 client Boxen (UFS910) funzen
astabohne. Die client boxen (UFS910) mit oscam einrichten, wie hier schon
von Musicnapper gepostet wurde. Dann auf freetz/ Igel nur noch oscam & camd3
einschalten. Dann am Server oscam.config, oscam.server & oscam.user konfigurieren & fertig.
Grüße
Hi, bei der Oscam server des Servers brauchst du nichts machen. Wie schon mal erwähnt, mit der config gibt man die Daten, die man sich mit der server geholt hat, weiter. Du mußt beim Client den CCcam reader einschalten und die Daten anpassen.
[reader]
label = cccam-reader_(cardsharing)
enable = 1
protocol = cccam
device = Serverip
user = USER --- anpassen
password = PASS --- anpassen
group = 1
emmcache = 1,1,2
cccversion = 2.0.11
cccmaxhops = 5.
Purzelpreis
23.02.13, 14:34
@ sammy909,
das ist so nicht richtig. Die oscam.server des Servers ist mit die
Wichtigste. Hier werden die Kartenleser für das CS konfiguriert!
Oscam wird als Binary in das emuverzeichnis der Kathie kopiert und
dann die Rechte auf 755 gesetzt. Mit FB im Emumenue anschalten, aktivieren & fertig!
Grüße
@sammy909
Habe ich so gemacht,aber keine Änderung
@Purzelpreis
In der oscam.server habe ich die cccam reader eingetragen und aktiviert.
auf der Kati die Oscam in var/emu rechte auf 755
Dann poste nochmal vom Server und vom Client, Oscam config, server und user.
@Purzelpreis der Server läuft.
Serverbox
oscam.config
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablelog = 1
logfile = /dev/null
unlockparental = 1
nice = -1
waitforcards = 0
preferlocalcards = 1
lb_mode = 1
lb_retrylimit = 1600
[cccam]
port = 12001
version = 2.3.0
reshare = 2
keepconnected = 3
[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
monlevel = 1
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.server.txt
[reader]
label = reader0_sky_s02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 1
emmcache = 1,3,2
[reader]
label = reader0_sky_v13
enable = 0
protocol = internal
device = /dev/sci0
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_sky_v14
protocol = internal
device = /dev/sci0
caid = 098C
boxid = 12345678
detect = cd
mhz = 500
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci0
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci0
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,3,2
[reader]
label = reader0_hd+_hd03
enable = 0
protocol = internal
device = /dev/sci0
smargopatch = 1
caid = 1860
rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1 D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766 117565E39995EFBF72135C2817B7
boxkey = A7642F57BC96D37C
detect = cd
nagra_read = 2
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = reader0_srg_via
enable = 0
protocol = internal
device = /dev/sci0
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_orf_0d95
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_orf_0d05
enable = 0
protocol = internal
device = /dev/sci0
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 1
emmcache = 1,3,2
[reader]
label = reader0_kabelbw_v23
enable = 0
protocol = internal
device = /dev/sci0
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
[reader]
label = reader1_sky_s02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 600
cardmhz = 600
group = 2
emmcache = 1,3,2
[reader]
label = reader1_sky_v13
enable = 0
protocol = internal
device = /dev/sci1
caid = 09C4
boxid = 596C3056
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_sky_v14
enable = 0
protocol = internal
device = /dev/sci1
caid = 098C
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd01
enable = 0
protocol = internal
device = /dev/sci1
caid = 1830
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd02
enable = 0
protocol = internal
device = /dev/sci1
caid = 1843
rsakey = BF358B5461863130686FC933FB541FFCED682F3680F09DBC1A 23829FB3B2F766B9DD1BF3B3ECC9AD6661B753DCC3A9624156 F9EB64E8168EF09E4D9C5CCA4DD5
boxkey = A7642F57BC96D37C
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,3,2
[reader]
label = reader1_hd+_hd03
enable = 0
protocol = internal
device = /dev/sci1
smargopatch = 1
caid = 1860
rsakey = 901E595152E67DFD5B134E1D195C4141B3BB1394A8AF4D6BF1 D1085DCC4D9CBA5C73A06ED21FC3556B685498030BB1185766 117565E39995EFBF72135C2817B7
boxkey = A7642F57BC96D37C
detect = cd
nagra_read = 2
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
[reader]
label = reader1_srg_via
enable = 0
protocol = internal
device = /dev/sci1
caid = 0500
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_orf_0d95
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D95
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_orf_0d05
enable = 0
protocol = internal
device = /dev/sci1
caid = 0D05
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,3,2
[reader]
label = reader1_kabelbw_v23
enable = 0
protocol = internal
device = /dev/sci1
caid = 098E
boxid = 12345678
detect = cd
mhz = 357
cardmhz = 357
group = 2
emmcache = 1,1,2
[reader]
label = line_cccam
protocol = cccam
device = 192.168.x.xx,12001
user = mxxxx
password = pxxxx
reconnecttimeout = 2
fallback = 1
group = 1
emmcache = 1,1,2
cccversion = 2.3.0
cccmaxhops = 2
cccreshare = 0
[reader]
label = line_newcamd
enable = 0
protocol = newcamd
device = host
key = 0102030405060708091011121314
user = pass
password = pass1
fallback = 1
group = 3
[reader]
label = reader-22
enable = 0
protocol = cccam
device =
inactivitytimeout = 0
oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.user.txt
[account]
user = cccam
pwd = cccam
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2,3
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
[account]
user = mxxxx
pwd = pxxxx
hostname = 192.168.x.xx,12001
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2,3
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
Clientbox
oscam.config
#
# main configuration
#
[global]
nice = -1
WaitForCards = 1
# logging
logfile = /var/log/oscam/oscam.log
usrfile = /var/log/oscam/oscamuser.log
cwlogdir = /var/log/oscam/cw
# monitor
[monitor]
[monitor]
nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
# web interface
[webif]
httpport = 8888
httpuser = myusername
httppwd = mypassword
# anti-cascading
[anticasc]
enabled = 1
numusers = 1
sampletime = 2
samples = 5
penalty = 1
aclogfile = /var/log/oscam/aclog.log
denysamples = 9
# protocols
[newcamd]
key = 000102030405060708090A0B0C0D
port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0 300:FFFFFF
[radegast]
port = 20000
user = user1
allowed = 192.168.0.0-192.168.255.255
[cs378x]
port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0 300:FFFFFF
[cccam]
port = 12001
version = 2.3.0
reshare = 2
[gbox]
hostname = host.example.com
port = 50000
password = password1
[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300
[dvbapi]
enabled = 1
user = mxxxx
oscam.server
#
# reader configuration
#
# serial reader
[reader]
label = reader1
protocol = mouse
detect = CD
device = /dev/ttyS0
group = 1
emmcache = 1,3,2
services = services1
caid = 0100
# USB serial reader
[reader]
label = reader2
protocol = mouse
detect = CD
device = /dev/ttyUSB0
aeskey = 000102030405060708090A0B0C0D0E0F
group = 2
emmcache = 1,3,2
services = services2
caid = 0200
# remote newcamd reader with fallback for group 1
[reader]
label = remote1
protocol = newcamd
key = 0102030405060708091011121314
device = 192.168.0.2,66666
user = user1
password = password1
group = 1
fallback = 1
# remote camd 3.78x reader with fallback for group 2
[reader]
label = remote2
protocol = cs378x
device = 192.168.0.3,23456
user = user2
password = password2
group = 2
fallback = 1
# remote gbox reader
[reader]
label = remote3
protocol = gbox
mg-encrypted = D: { 192.168.0.4 { 12345 34567 { ABCD1234 { 9 9 }}}}
group = 3
caid = 0300
remote CCcam reader
[reader]
label = cccam-reader
protocol = cccam
device = 192.168.x.xx,12001
user = mxxxx
password = pxxxx
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.3.0
# remote radegast reader
[reader]
label = remote5
protocol = radegast
device = 192.168.0.6,56789
group = 5
caid = 0500
# PCSC reader
[reader]
label = mypcscreader
protocol = pcsc
device = 0
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 6
caid = 0600
# Smargo Smartreader+ (Tripple Reader as well) using kernel drivers (recommended)
[reader]
label = mysmargo
protocol = smargo
device = /dev/ttyUSB1
aeskey = 0102030405060708090a0b0c0d0e0f10
group = 7
caid = 0700
# Smargo Smartreader+ using libusb
[reader]
label = mysmartreader
protocol = smartreader
device = 001:002
group = 8
caid = 0800
# internal reader
[reader]
label = myinternalreader
protocol = internal
device = /dev/sci0
group = 9
caid = 0900
# AD-Teknik AB Multiprogrammer 3.5 serial
[reader]
label = reader9
protocol = mp35
detect = CD
device = /dev/ttyS1
group = 10
emmcache = 1,3,2
services = services9
caid = 1000
# AD-Teknik AB Multiprogrammer 3.6 USB
[reader]
label = reader10
protocol = mp35
detect = CD
device = /dev/ttyUSB1
group = 11
emmcache = 1,3,2
services = services10
caid = 1100
# AD-Teknik AB USB Phoenix at 6.00 mhz
[reader]
label = reader12
protocol = mp35
detect = CD
device = /dev/ttyUSB2
mhz = 600
group = 12
emmcache = 1,3,2
services = services11
caid = 1200
# sc8in1 reader
[reader]
label = reader12
protocol = sc8in1
device = /dev/ttyUSB3:1
group = 13
emmcache = 1,3,2
caid = 1300
oscam.user
################## General Instruction - oscam.user ####################
# #
# per default no changes from the user are needed #
# #
################################################## ##########################
[account]
user = mxxxx
pwd = pxxxx
hostname = 192.168.x.xx,12001
group = 1
au = 1
uniq = 0
betatunnel = 1833.FFFF:1702
######## end of file ########
Purzelpreis
23.02.13, 16:11
Hi,
oscam.server von dem Serrver
enable = 0
gaaaanz schlecht. Die Karten im reader müssen im WebIF erkannt werden &
entitlements haben.
Bei mir sieht das so aus für den 2. & 3. Reader Sky S02 & HD+ HD01 im Smargo:
[reader]
label = sky2
description = #S02
enable = 1
protocol = smartreader
device = Serial:Reader XX0A5XX
key =
password =
pincode = none
readnano =
services =
resetcycle = 0
smargopatch = 0
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 1
cacheex_drop_csp = 0
caid = 1702,1833
atr =
boxid =
boxkey = 1bekannt8
rsakey =
ins7e =
ins7e11 =
fix9993 = 0
force_irdeto = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1702:93
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 600
cardmhz = 600
ident =
chid =
class =
aeskeys =
group = 2
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
[reader]
label = hd1
description = #28.05.2013
enable = 1
protocol = smartreader
device = Serial:Reader XX4FDXX
key =
password =
pincode = none
readnano =
services =
resetcycle = 0
smargopatch = 1
sc8in1_dtrrts_patch = 0
fallback = 0
cacheex = 0
cacheex_maxhop = 0
cacheex_ecm_filter =
cacheex_allow_request = 1
cacheex_drop_csp = 0
caid = 1830
atr =
boxid =
boxkey = A76bekannt37C
rsakey = BF3bekanntDD5
ins7e =
ins7e11 =
fix9993 = 0
force_irdeto = 0
ecmnotfoundlimit = 0
ecmwhitelist = 1830:92
ecmheaderwhitelist =
detect = cd
nagra_read = 0
mhz = 369
cardmhz = 368
ident =
chid =
class =
aeskeys =
group = 3
emmcache = 1,3,2
blockemm-unknown = 1
blockemm-u = 0
blockemm-s = 0
blockemm-g = 0
saveemm-unknown = 0
saveemm-u = 0
saveemm-s = 0
saveemm-g = 0
blockemm-bylen =
lb_weight = 300
savenano =
blocknano =
dropbadcws = 0
disablecrccws = 0
use_gpio = 0
ccchop = 0
deprecated = 0
audisabled = 0
auprovid =
ndsversion = 0
ratelimitecm = 0
ratelimitseconds = 0
cooldown = 0,0
Grüße
Ich habe ja,interne Reader
Auszug vom Webif
OSCAM 1.20-unstable_svn build #7798
STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN
hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x5c2e20 s 0 root 127.0.0.1 0 server 23.02.13 14:40:56 01:39:12 0000:0000 00:00:01 OK
Hide 0x622ec0 h 1 root 127.0.0.1 0 http 23.02.13 14:40:56 01:39:12 0000:0000 00:00:00 OK
Readers 1/1
Hide 0x5feb78 r 1 reader0_sky_v14 ON OFF 127.0.0.1 0 internal 23.02.13 14:40:56 01:39:12 0000:0000 121 00:33:34 CARDOK (14 entitlements)
Proxies 0/1
Hide Restart p 1 line_cccam ON OFF 192.168.x.xx 12001 cccam (-) 0000:0000 no data 01:30:05 OFF
Clients 1/1 (0 with ECM within last 15 seconds)
Hide Kill c 1 cccam ON ON 127.0.0.1 49549 cccam (2.3.0-3367) 23.02.13 14:41:12 01:38:56 0000:0000 00:33:35 OK
Grüsse
Beim Server mußt du in der server den CCcam reader wieder ausschalten.
[reader]
label = line_cccam
enable = 0
protocol = cccam
device = 192.168.x.xx,12001
user = mxxxx
password = pxxxx
reconnecttimeout = 2
fallback = 1
group = 1
emmcache = 1,1,2
cccversion = 2.3.0
cccmaxhops = 2
cccreshare = 0
beim Client alles ausschalten, brauchst du nur, wenn du weitersharen willst.
# protocols
#[newcamd]
key = 000102030405060708090A0B0C0D
port = 10000@0100:FFFFFF;10001@0200:FFF000,FFFF00;10002@0 300:FFFFFF
#[radegast]
port = 20000
user = user1
allowed = 192.168.0.0-192.168.255.255
#[cs378x]
port = 30000@0100:FFFFFF;30001@0200:FFF000,FFFF00;30002@0 300:FFFFFF
#[cccam]
port = 12001
version = 2.3.0
reshare = 2
#[gbox]
hostname = host.example.com
port = 50000
password = password1
[serial]
device = user2@/dev/ttyS0?delay=1&timeout=300
[dvbapi]
enabled = 1
user = mxxxx
user
[account]
user = mxxxx
pwd = pxxxx
hostname = 192.168.x.xx,12001
group = 1
au = 1
uniq = 0
caid = 098C
#betatunnel = 1833.FFFF:1702
Habe ich geändert,geht nicht
Hmm, dann nimm auch mal die Hostname Sache aus den user accounts. Die Passwörter stimmen ? Poste mal die Logs von den Webif`s, nach einem Reset.
Die Passwörter müßen übereinstimmen.
[dvbapi]
enabled = 1
user = mxxxx
[account]
user = mxxxx
pwd = pxxxx
hostname = 192.168.x.xx,12001
group = 1
au = 1
uniq = 0
caid = 098C
#betatunnel = 1833.FFFF:1702.
und das mit dem
[reader]
label = line_cccam
enable = 0
protocol = cccam
device = 192.168.x.xx,12001
user = mxxxx
password = pxxxx
reconnecttimeout = 2
fallback = 1
group = 1
emmcache = 1,1,2
cccversion = 2.3.0
cccmaxhops = 2
cccreshare = 0
[account]
user = mxxxx
pwd = pxxxx
hostname = 192.168.x.xx,12001
au = 1
betatunnel = 1833.FFFF:1702
group = 1,2,3
cccmaxhops = 15
cccreshare = 15
cccignorereshare = 1
Die Paßwörter stimmen.
OSCAM 1.20-unstable_svn build #7798
STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN
hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x5c2e20 s 0 root 127.0.0.1 0 server 23.02.13 14:40:56 01:39:12 0000:0000 00:00:01 OK
Hide 0x622ec0 h 1 root 127.0.0.1 0 http 23.02.13 14:40:56 01:39:12 0000:0000 00:00:00 OK
Readers 1/1
Hide 0x5feb78 r 1 reader0_sky_v14 ON OFF 127.0.0.1 0 internal 23.02.13 14:40:56 01:39:12 0000:0000 121 00:33:34 CARDOK (14 entitlements)
Proxies 0/1
Hide Restart p 1 line_cccam ON OFF 192.168.x.xx 12001 cccam (-) 0000:0000 no data 01:30:05 OFF
Clients 1/1 (0 with ECM within last 15 seconds)
Hide Kill c 1 cccam ON ON 127.0.0.1 49549 cccam (2.3.0-3367) 23.02.13 14:41:12 01:38:56 0000:0000 00:33:35 OK
2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: ret rc=1
2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0)
2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: ecm: 748D real time: 121 ms
2013/02/23 17:10:07 5FEB78 r add client job action 24 queue length 1 cccam
2013/02/23 17:10:07 626728 c poll() timeout
2013/02/23 17:10:07 626728 c reader0_sky_v14 [videoguard2] TRACE: ecm answer for ecm 748D rc=0
2013/02/23 17:10:07 626728 c cccam (098C&000000/0000/0081/98:748D): found (124 ms) by reader0_sky_v14 (L/1/2/2)
2013/02/23 17:10:07 626728 c cw:
2013/02/23 17:10:07 626728 00 00 00 00 00 00 00 00 97 A5 75 B1 88 69 9F 90
2013/02/23 17:10:07 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2013/02/23 17:10:13 0 --- Skipped 5 duplicated log lines ---
2013/02/23 17:10:13 626728 c check again caid 098C on reader reader0_sky_v14
2013/02/23 17:10:13 626728 c request_cw stage=2 to reader reader0_sky_v14 ecm=4E28
2013/02/23 17:10:13 626728 c start reader thread action 5
2013/02/23 17:10:13 5FEB78 r data from add_job action=5 client r reader0_sky_v14
2013/02/23 17:10:13 5FEB78 r ecm:
2013/02/23 17:10:13 5FEB78 80 70 95 00 00 01 1D 6D 17 81 43 02 59 AA 55 05
2013/02/23 17:10:13 5FEB78 20 01 00 00 80 40 9D 34 3F 39 14 D1 40 FC 79 03
2013/02/23 17:10:13 5FEB78 02 06 02 96 73 7D 0B 0C DE 15 A9 54 1A 0F CE 9A
2013/02/23 17:10:13 5FEB78 00 00 90 64 C1 01 73 42 48 D8 53 93 26 F7 E7 5D
2013/02/23 17:10:13 5FEB78 8B 80 75 71 94 4E 8B 47 02 48 D8 54 29 6D EF 5D
2013/02/23 17:10:13 5FEB78 4C F0 0A B7 62 87 EB 66 81 F1 4C AF C5 22 DD C8
2013/02/23 17:10:13 5FEB78 6E DB 23 51 1F CB B8 B5 99 ED 6E 56 2C 99 A2 C8
2013/02/23 17:10:13 5FEB78 42 D7 0F 66 AD 61 D3 AC 5F 20 EF B0 CE 76 08 C1
2013/02/23 17:10:13 5FEB78 2F 87 ED FA 6E 61 3B 57 51 82 53 48 17 E7 F1 89
2013/02/23 17:10:13 5FEB78 7E 9F 0C 5F 84 40 38 37
2013/02/23 17:10:13 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2013/02/23 17:10:13 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: cardreader_do_checkhealth returned rc=1
2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: after csystem.do_ecm rc=1
2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_ecm: ret rc=1
2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_process_ecm: cardreader_do_ecm returned rc=1 (ERROR=0)
2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: ecm: 4E28 real time: 121 ms
2013/02/23 17:10:14 5FEB78 r add client job action 24 queue length 1 cccam
2013/02/23 17:10:14 626728 c poll() timeout
2013/02/23 17:10:14 626728 c reader0_sky_v14 [videoguard2] TRACE: ecm answer for ecm 4E28 rc=0
2013/02/23 17:10:14 626728 c cccam (098C&000000/0000/0081/98:4E28): found (124 ms) by reader0_sky_v14 (L/1/2/2)
2013/02/23 17:10:14 626728 c cw:
2013/02/23 17:10:14 626728 C9 90 39 92 75 05 08 82 00 00 00 00 00 00 00 00
2013/02/23 17:10:14 5FEB78 r reader0_sky_v14 [videoguard2] TRACE: cardreader_do_checkhealth: reader->card_status = 2, ret = 1
2013/02/23 17:10:15 622EC0 h WebIf: Origin checked. Result: access from 192.168.1.6 => allowed
So was man aus dem Ausschnitt sehen kann, kommen keine Anfragen vom Client. Poste mal den Log vom Client, nach einem Reset.
Purzelpreis
23.02.13, 17:21
Hi,
hier wird das Pferd von hinten aufgezäumt. Wenn die Kathie nach der
Anleitung von Musicnapper bearbeitet wurde, ist nur noch an der Kathie die
oscam.dvbapi (prio v14)
und
oscam.server (port für oscam am Router, username, paßwort)
angepaßt werden. Die UFS910 clienten sind jetzt fertig!
Jetzt zum Server.
Die oscam.server muß für jede Karte/ caid entitlements haben. Wenn eine Karte Sky v13 noch mit zusätzlich
HD+, gibt es in der oscam.server 2 getrennte reader mit unterschiedlichen group, welche sich durch die caid unterscheiden.
Dann dazu noch einen proxy (reader) camd3emu einrichten (group = 3) für O*F/ Austriasat, da oscam keine softcam.key
lesen kann.
Grüße
Welche Caid hat denn HD+ auf einer V 13 Karte. Oder was willst du uns mitteilen. Da mußt du schon eine richtige Camd 3 haben, die Keys kannst du dann mit Oscam über Camd 3 Protokoll verteilen.
@Purzelpreis
hier die dvbapi,schau sie dir mal an,wo und wie muß der Eintrag erfolgen ?
Am Router habe ich den Port 12001 an die Ip der Serverbox weitergeleitet und ich habe eine V14.Habe wie schon geschreiben den oscam mod laufen und funzt super, aber das sharen:durcheinander-ersta
##################### General Instruction - oscam.dvbapi ######################
# Oscam will work properly without these configs, but you will get quicker #
# access in case of Zapping, especially when your CAID is not in first row of PMT #
# - prioritize the CAID from your provider that fits your Smartcard #
# - exclude other CAID´s from your provider, that doesn´t fit your Smartcard #
# #
# just enable examples that fits to your environment #
# #
# For further details see the OSCAM documentation #
################################################## #################################
# Example Sky Germany S02 Card
#P: 1702
#P: 1833
#I: 09c4
#I: 09c7
#I: 09af
#I: 1722
#I: 1836
# Example HDplus HD01 Card (white)
#M: 1830 1830:003411
#P: 1830:000000
#I: 1834:000000
# Example HDplus HD02 Card (black)
#M: 1843 1843:003411
#P: 1843:000000
#I: 1830:000000
# Example ORF new ICE Card
#P: 0d95
#I: 0d05
#I: 0648
@sammy909
hier ein Auszug Webif der Clientbox
OSCAM 1.20-unstable_svn build #8006
STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN
hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x535fb0 s 0 root 127.0.0.1 0 server 23.02.13 16:35:42 01:12:02 0000:0000 00:00:11 OK
Hide 0x5e03a0 h 1 root 127.0.0.1 0 http 23.02.13 16:35:42 01:12:02 0000:0000 00:00:00 OK
Proxies 0/1
Hide Restart p 1 cccam-reader_(cardsharing) ON OFF 192.168.x.xx 12001 cccam (-) 0000:0000 no data 01:11:39 OFF
Clients 1/1 (0 with ECM within last 15 seconds)
Hide Kill c 1 anonymous OFF OFF 0.0.0.0 0 dvbapi 23.02.13 16:35:43 01:12:01 0000:0000 01:11:39 OK
2013/02/23 16:35:57 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:35:57 5E33F8 c anonymous (1861&000000/0000/0017/8E:F4F1B0373FB0E1B7E59A86D7F10861D7): rejected (521 ms) by cccam-reader_(cardsharing) - 1861:0017 unknown
2013/02/23 16:35:58 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:35:58 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:35:58 5E33F8 c anonymous (1702&000000/0000/0017/93:694520D5B01B90B163E8A66E9395CE6B): rejected (521 ms) by cccam-reader_(cardsharing) - Sky Krimi [B sat]
2013/02/23 16:35:59 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:35:59 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:35:59 5E33F8 c anonymous (1722&000000/0000/0017/93:34B1A7A85E376FA13D3CEAA9841A6D6D): rejected (515 ms) by cccam-reader_(cardsharing) - 1722:0017 unknown
2013/02/23 16:36:00 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:36:00 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:36:00 5E33F8 c anonymous (1833&000000/0000/0017/89:8619B54443C0884B1574A45AD167F4CA): rejected (515 ms) by cccam-reader_(cardsharing) - Sky Krimi [B sat]
2013/02/23 16:36:01 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.1.30:12001
2013/02/23 16:36:01 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:36:01 5E33F8 c anonymous (1834&000000/0000/0017/89:9EA2432646AEA85E73819D09B696292C): rejected (521 ms) by cccam-reader_(cardsharing) - 1834:0017 unknown
2013/02/23 16:36:02 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:36:02 5E33F8 c anonymous (09C4&000000/0000/0017/B3:19FEE25B4B93FBBE4568A35A9B8DA7B9): rejected group (129 ms) (0/0/0/0) - 09C4:0017 unknown (no matching reader)
2013/02/23 16:36:02 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:36:02 5E33F8 c anonymous (09C4&000000/0000/0017/B3:94F21C1187C45453C6A02B2B8C807622): rejected (516 ms) by cccam-reader_(cardsharing) - 09C4:0017 unknown
2013/02/23 16:36:03 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:36:03 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:36:03 5E33F8 c anonymous (09AF&000000/0000/0017/92:908549BCE731E695BE6A54FB928C922C): rejected (518 ms) by cccam-reader_(cardsharing) - 09AF:0017 unknown
2013/02/23 16:36:04 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:36:04 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:36:04 5E33F8 c anonymous (098C&000000/0000/0017/98:77756A3A432E8C33729BB16FC14C98BD): rejected (515 ms) by cccam-reader_(cardsharing) - 098C:0017 unknown
2013/02/23 16:36:05 5C73A8 p cccam-reader_(cardsharing) [cccam] connecting to 192.168.x.xx:12001
2013/02/23 16:36:05 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
2013/02/23 16:36:05 5E33F8 c dvbapi: ERROR: Can't decode channel
2013/02/23 16:36:05 5E33F8 c anonymous (1861&000000/0000/0017/8E:02461AE4595C26936A9E2A96593B6F5C): rejected (515 ms) by cccam-reader_(cardsharing) - 1861:0017 unknown
was mich stutzig macht ist,
2013/02/23 16:36:02 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
habe die Paßwörter kontrolliert,stimmen ????
Die Passwörter stimmen nicht.
2013/02/23 16:35:57 5C73A8 p cccam(r) cccam-reader_(cardsharing): login failed, usr/pwd invalid
Purzelpreis
23.02.13, 17:58
HD+ caid 1843 für v13
deshalb habe ich 2 weiße HD+ karten mit caid 1830
Grüße
- - - Aktualisiert - - -
HD+ caid 1843 für v13
deshalb habe ich 2 weiße HD+ karten mit caid 1830
@ faun
meine DVB api
P: 0d05 # prio camd3emu
P: 1702 # prio Sky s02 #wenn Ihr eine V13 nutzt, ersetzt das P durch ein I
P: 1833 # prio SKY HD
P: 0b00 # prio MTV
P: 1830 # prio HD01 HD+
I: 0D95 # prio ORF-ICE
I: 09C4 # ignore Sky V13 ##wenn Ihr eine V13 nutzt, ersetzt das I durch ein P
Grüße
@Purzelpreis Er hat eine V 14, also Caid 098C. Wenn eine dvbapi config, dann so.
##################### General Instruction - oscam.dvbapi ######################
# Oscam will work properly without these configs, but you will get quicker #
# access in case of Zapping, especially when your CAID is not in first row of PMT #
# - prioritize the CAID from your provider that fits your Smartcard #
# - exclude other CAID´s from your provider, that doesn´t fit your Smartcard #
# #
# just enable examples that fits to your environment #
# #
# For further details see the OSCAM documentation #
################################################## #################################
# Example Sky Germany S02 Card
P: 098C
#P: 1833
#I: 09c4
#I: 09c7
#I: 09af
#I: 1722
#I: 1836
# Example HDplus HD01 Card (white)
#M: 1830 1830:003411
#P: 1830:000000
#I: 1834:000000
# Example HDplus HD02 Card (black)
#M: 1843 1843:003411
#P: 1843:000000
#I: 1830:000000
# Example ORF new ICE Card
#P: 0d95
#I: 0d05
#I: 0648
Edit. @Purzelpreis Caid 1843 ist die schwarze HD+ Karte. Du mußt einfach mit services arbeiten und zwar beim V 13 reader sky services einfügen. Dann wird nur Sky abgfragt, kein HD+.
Purzelpreis
23.02.13, 18:12
@sammy,
wenn auf der v14 HD+ aufgeschaltet ist, dann dazu
P: 0d05 # prio camd3emu
P: 1843 # prio HD+
wenn ein I (ignore) davor steht, braucht man nicht auskiommentieren!
Das sharing soll erst mal laufen, dann kann man mit services arbeiten.
Mein Server (Igel) sind services angelegt!
Grüße
Du meinst also die Karte arbeitet mit zwei Caids ? ORF kann er mit Oscam nicht entschlüsseln. Entweder muß er Doscam nutzen oder eben eine Cam. Du hast bei dir noch eine Camd 3 laufen, die die Keys an Oscam weiter gibt.
Purzelpreis
23.02.13, 18:37
camd3emu lesen
Stimmen jetzt die Passwörter ? Log vom Client. :153:
Habe jetzt die Paßwörter und Usernamen angepaßt,alles auf cccam geändert,jetzt ein neues Webif,aber nichts hell auf dem Clienten
OSCAM 1.20-unstable_svn build #7798
STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN
hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x5c2e20 s 0 root 127.0.0.1 0 server 23.02.13 14:40:56 04:43:08 0000:0000 00:00:01 OK
Hide 0x622ec0 h 1 root 127.0.0.1 0 http 23.02.13 14:40:56 04:43:08 0000:0000 00:00:00 OK
Readers 1/1
Hide 0x5feb78 r 1 reader0_sky_v14 ON OFF 127.0.0.1 0 internal 23.02.13 14:40:56 04:43:08 0000:0000 119 00:59:13 CARDOK (14 entitlements)
Proxies 1/1
Hide Restart p 1 line_cccam ON ON 192.168.x.xx 12001 cccam ext (2.3.0-3367) 23.02.13 19:20:47 00:03:17 0000:0000 no data 00:03:17 CONNECTED (0 of 0 card)
Clients 2/2 (0 with ECM within last 15 seconds)
Hide Kill c 1 cccam ON ON 127.0.0.1 49549 cccam (2.3.0-3367) 23.02.13 14:41:12 04:42:52 0000:0000 00:59:13 OK
Hide Kill c 2 cccam ON ON 192.168.x.xx 49105 cccam ext (2.3.0-3367) 23.02.13 19:20:47 00:03:17 0000:0000 00:03:17 OK
2013/02/23 19:01:08 677378 p line_cccam [cccam] proxy initialized, server 192.168.x.xx:12001
Häh, poste alle configs. Du hast jetzt CCcam installiert ? ? ?
sollte ich cccam stoppen ? meinst du das es damit etwas zu tun hatt? Die Oscam vom Clienten muß sich doch mit der Oscam auf dem Server verbinden, über das Cccam Protokoll,liege ich da falsch ?
Client
oscam.config# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r8006
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
serverip = 192.168.x.x
logfile = stdout
clienttimeout = 7000
fallbacktimeout = 3000
cachedelay = 120
bindwait = 5
nice = -1
preferlocalcards = 1
[dvbapi]
enabled = 1
au = 1
user = maren
boxtype = ufs910
[webif]
httpport = 8888
httpuser = root
httppwd = oscam
httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255
appendchaninfo = 1
Server
oscam.config
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
# Read more: http://www.streamboard.tv/svn/oscam/trunk/Distribution/doc/txt/oscam.conf.txt
[global]
disablelog = 1
logfile = /dev/null
unlockparental = 1
nice = -1
waitforcards = 0
preferlocalcards = 1
lb_mode = 1
lb_retrylimit = 1600
[cccam]
port = 12001
user = cccam
password = cccam
version = 2.3.0
reshare = 2
keepconnected = 3
[monitor]
port = 16500
nocrypt = 127.0.0.1,192.168.65.1,192.168.65.206,192.168.65.2 08
monlevel = 1
[webif]
httpport = 83
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
Ja, das versuchen wir ja die ganze Zeit. Die CCcam auf dem Server ist wohl für ORF usw. Was hast du denn jetzt geändert ? Wenn du mit dem Clienten weitersharen willst, solltest du einen anderen Port wählen.
Wir waren uns doch einig, daß mit der Oscam config nur verteilt werden kann.
Ich habe in der Zwischenzeit so viel gelesen, mir raucht der Kopf. Welchen Port ? Du schreibst,das mit der Oscam config nur verteilt werden kann,das soll sie ja auch nur,auf der Serverbox funktioniert die Entschlüssellung ja,ich möchte von der Clientbox mit einer Oscam,nur auf die Serverbox,um HS und später CS zu machen.Die Cccam brauch ich nicht für ORF,dafür habe ich Softcam.keys unter var/keys abgelegt,funzt wunderbar.
- - - Aktualisiert - - -
Hallo sammy909
Ich kann es nicht fassen,es funktioniert,habe die Clientbox nochmal gestartet und nun gehts.:lol:
Hier nochmal Webif
OSCAM 1.20-unstable_svn build #7798
STATUS CONFIGURATION READERS USERS SERVICES FILES FAILBAN CACHEEX SCRIPT SHUTDOWN
hide Thread ID Type ID Label AU Crypted Address Port Protocol Login Online CAID:SRVID Current Channel LB Value/ Reader Idle Status
Hide 0x5c2e20 s 0 root 127.0.0.1 0 server 23.02.13 14:40:56 05:28:38 0000:0000 00:00:00 OK
Hide 0x622ec0 h 1 root 127.0.0.1 0 http 23.02.13 14:40:56 05:28:38 0000:0000 00:00:00 OK
Readers 1/1
Hide 0x5feb78 r 1 reader0_sky_v14 ON OFF 127.0.0.1 0 internal 23.02.13 14:40:56 05:28:38 098C:0083 Sky: Sky Cinema HD 120 00:00:03 CARDOK (14 entitlements)
Proxies 1/1
Hide Restart p 1 line_cccam ON ON 192.168.x.xx 12001 cccam ext (2.3.0-3367) 23.02.13 19:55:48 00:13:46 0000:0000 no data 00:13:46 CONNECTED (0 of 0 card)
Clients 3/3 (1 with ECM within last 15 seconds)
Hide Kill c 1 cccam ON ON 127.0.0.1 49549 cccam (2.3.0-3367) 23.02.13 14:41:12 05:28:22 0000:0000 01:44:43 OK
Hide Kill c 2 cccam ON ON 192.168.x.xx 49106 cccam ext (2.3.0-3367) 23.02.13 19:55:48 00:13:46 0000:0000 00:13:46 OK
Hide Kill c 3 cccam ON ON 192.168.x.x 43956 cccam ext (2.3.0-3367) 23.02.13 19:57:32 00:12:02 098C:0083 Sky: Sky Cinema HD by reader0_sky_v14 (120ms) 00:00:03 OK
2013/02/23 20:05:35 774038C0 c cccam (098C&000000/0000/001B/98:4DC6): found (121 ms) by reader0_sky_v14
Nochmal danke für deine Hilfe. Nun muß ich es nur noch mit CS übers I-Net hin bekommen,vieleicht kannst du mir da noch helfen.
Muß ich nur die Dyndns Adi dort eintragen,wo die IP steht unter oscam.server Cccam der Clientbox?
Ja, ... gelobt sei ...
Edit.
Geändert von sammy909 (Heute um 20:01 Uhr) Grund: Verlesen, ich kann nicht mehr, dachte es wäre die client config
Edit. Beim Client geht auch ORf ?
ja da ist die Softcam.key auch drauf.
Aha, hab jetzt Doscam auf der Cooli und Dbox, die hat auch eine " Emuabteilung ", muß man aber in der user über group aktivieren.
brauchts nur die softcam.key einfügen und orf ist offen.
[reader]
label = Sky
protocol = newcamd
device = ,50251
key = 0103
user =
password =
caid = 1702,1833
group = 1
[reader]
label = HD+
protocol = newcamd
device = ,50252
key = 0103
user =
password =
caid = 1843
group = 2
[reader]
label = emu
enable = 1
protocol = constcw
device = /var/keys/SoftCam.Key
caid = 0D05,0500,0100
group = 3
[reader]
label = orf-card
enable = 0
protocol = internal
device = 0
caid = 0D05
detect = cd
mhz = 1200
group = 4
emmcache = 1,1,2
[account]
user = sammy
group = 1,2,3,4
caid = 1702,1843,1833,0d05,0100,0500
betatunnel = 1833.FFFF:1702
au = 1
monlevel = 4
:rauchende0038:
16266
Ja, das geht auch. Hatte auch mal ein System am laufen, Dbox2 als Server mit Cccam und Newcamd und 3 Katis mit Mgcamd, wollte aber nur eine Box als Server,daher das neue System.Oscam ist für mich Neuland. Aber mich interessiert, wie ich die Einstellungen machen muß um CS machen zu können, übers I-Net. Denke das ich die Dyndns ,dort eintragen muß, wo ich jetzt fürs HS, die IP eingetragen habe, hoffe ich liege richtig.
Hi, ja und im Router dyndns aktivieren. Den Port hast du ja schon zum Server weiter geleitet. Kannst ja mal die dyndns eintragen, wird der Router auch im Heimnetz können.
Was muß noch auf der Clientbox, in oscam.config,server,user geändert,bzw. eingetragen werden,das er Zugriff auf den Server hatt.
Mußt nur die Serverip durch dyndns ersetzen.
[reader]
enable = 1
label = cccam-reader (Cardsharing)
protocol = cccam
device = IP/dyndns,PORT
user = USER
password = PASS
group = 1
emmcache = 1,1,2
cccmaxhop = 5
cccversion = 2.0.11
In der oscam.server der Clientbox,sonst nichts ?Nur zum Verständnis,wie funktioniert das,die Serverbox erlaubt jeden zugriff,die von außen kommt, Kopfkratz ????
Auf der Serverbox nichts ändern ?nicht die oscam.server abändern,unter reader cccam ?
Nein, mit der server kannst du nicht weitersharen.
Nun geht ORF nicht mehr,hatte bis jetzt keine Probleme.
gelöst, habe andere Oscam ( OSCAM 1.00-unstable_svn-ymodv18-t33 build #0) aufgespielt, hatt aber kein Webif,ist blöd.
Kann man es sehen im Webif der Serverbox,wenn die Clientbox zugreift ?
CS übers I-Net funktioniert nicht.Muß beim Clienten, im Router etwas freigegeben werden,könnte vieleicht geblockt werden.
Ja, man kann es beim Server sehen. Funktioniert denn deine dyndns ? Der Client kann mal deine öffentliche IP, anstatt dyndns eintragen.
ja habe die Adi angepingt und ist erreichbar,habe die Dynds unter Kaspersky freigegeben.
Stimmt die Portweiterleitung ? TCP Port
ja,habe die Dynds Adresse,an die IP der Xtrend mit dem TCP Port 12001 weitergeleitet. Habe die Dynds nochmal unter http://network-tools.com getestet und ist erreichbar.
Kann man mit Oscam las Client auch EMMs senden? Mit HD+ geht das bei mir nicht. Egal welches Protkoll ich wähle...
Hi, über newcamd remote reader funktioniert es bei mir tadellos, Server Oscam, Client Doscam.
Juhu es klappt nun :-)
Ich habe das
M: 1830 1830:003411
P: 1830:000000
I: 1834:000000
mit dem ersetzen müssen
P: 1830 1
Das brauchst du eigentlich nur wenn die Karte abgelaufen ist. So fragt Oscam immer wieder nach, ob sie einen Sender entschlüsseln kann. Ohne die 1 ist nach dreimal Schluß.
Hallo,
zur Zeit habe ich eine bestehndes und funktionierendes HS.
Brauch jetz aber für Eigenbedarf ein CS über inet.
Kann mir jemand helfen die zu bewerkstelligen
Anbei die Daten des HS
Server:
Oscam Config:
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 10000
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = XXXX.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
[account]
user = XXXX
pwd = XXXX
keepalive = 1
au = 1
group = 1
Oscam Server
reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7XXXX
rsakey = B5XXXX
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
Oscam User
[account]
user = local
au = 1
group = 1
Oscam Server
Oscam Server
[reader]
label = um02
protocol = camd35
device = 192.168.XXX.XX,1XXXX
user = XXXX
password = XXXX
group = 1
Danke !
VG BL RD
Hi, wie willst du dich denn verbinden ? Du mußt beim Client in der Server einen Remote Reader anlegen und die group dann in der User eintragen.
Hallo Samy909,
ich will ein reines OSCAM Netzerk, d. h. also mit eine OSCAM Server und einen OSCAM Client wie beim HS
Wie müsste der reader in der client aussehen? SO?
reader = um02
protocol =camd35
device = XXX.dyndns.org,10000
user = muss ich einen user beim server anlegen?
Password =
group = 1
Danke
Gruß
BLRD
Ja, beim Server muß ein Account angelegt werden. Fast, der Port wird vom Server " bestimmt ". Den Reader würd ich group 2 geben. In der User dann 2 eintragen.
group = 1,2
Hallo,
jetzt die aktualisierte Configs.
Server:
Oscam Config:
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 10000
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
[account]
user = XXXX
pwd = XXXX
keepalive = 1
au = 1
group = 1
[account]
user = 123
pwd = 123
description = client
hostname = 123.dyndns.org
au = 1
group = 2
Oscam Server
reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7XXXX
rsakey = B5XXXX
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = 123
pwd = 123
description = client
hostname = 123.dyndns.org
au = 1
group = 2
Oscam Server
[reader]
label = um02
protocol = 378x
device = 123.dyndns.org,10000
user = 123
password = 123
group = 2
Kann jemand drüber schauen bevor ich dies installiere?
Denn ich möcht nicht das HS zerschiessen, da mir sonst meine Schwangere Ehefrau ...:Lieb Streicheln:
Danke
Gruß
Hi, du willst doch als Client auf einen anderen Server zugreifen , oder willst du übers Netz weiter sharen ?
Ich denke du meinst mit weiter sharen , dass ich in WHG 1 einen Oscam laufen habe und in der WHG 2 (verbunden über INet) eine 2 Box auch mit Oscam.
Genau dies möchte haben!
Beide haben die Oscam r8915
Das wär jetzt der zweite Client. Hast du im Router den Port 10000 zum Server weitergeleitet ?
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
Oscam Server
[reader]
label = um02
protocol = 357x
device = 123.dyndns.org,10000
user = 123
password = 123
group = 1
Server user
[account]
user = 123
pwd = 123
au = 0
group = 1
Hallo,
nochmal zur Veranschaulichung
17452
:196:
Server
Server:
Oscam Config:
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 10000
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = XXXX.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
[account]
user = XXXX
pwd = XXXX
keepalive = 1
au = 1
group = 1
Oscam Server
reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A7XXXX
rsakey = B5XXXX
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
Client 1
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
Oscam User
[account]
user = local
au = 1
group = 1
Oscam Server
Oscam Server
[reader]
label = um02
protocol = camd35
device = 192.168.XXX.XX,1XXXX
user = XXXX
password = XXXX
group = 1
Client 2
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = 123
pwd = 123
description = client
hostname = 123.dyndns.org
au = 1
group = 2
Oscam Server
[reader]
label = um02
protocol = 378x
device = 123.dyndns.org,10000
user = 123
password = 123
group = 2
Kann mir jemand die vorhanden Configs aufarbeiten?
Danke.
Hi, hast du die Config mal getestet :coole0089:
Das wär jetzt der zweite Client. Hast du im Router den Port 10000 zum Server weitergeleitet ?
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
Oscam Server
[reader]
label = um02
protocol = 357x
device = 123.dyndns.org,10000
user = 123
password = 123
group = 1
Server user
[account]
user = 123
pwd = 123
au = 0
group = 1
Hallo,
so, konnte mich jetzt der Sache wieder widmen.
Anbei die korrigierten Config com Server und Client2.
Jedoch ohne Erfolg.
Auch die LOG´s sind anbei.
Server
conf
[global]
disablelog = 1
logfile = /tmp/oscam.log
fallbacktimeout = 4900
bindwait = 20
nice = -1
maxlogsize = 512
preferlocalcards = 1
[cs357x]
port = 12121
[cccam]
port = 12122
reshare = 2
ignorereshare = 1
version = 2.3.0
updateinterval = 300
minimizecards = 0
stealth = 0
reshare_mode = 0
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = 80XX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = XXXX.dyndns.org
user
[account]
user = local
au = 1
group = 1, 2
[account]
user = user1
pwd = user1
keepalive = 1
au = 1
group = 1, 2
[account]
user = user2
pwd = user2
keepalive = 1
group = 1, 2
hostname = XXXX.dyndns.org, 12122
cccmaxhops = 2
cccreshare = 1
server
[reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A76..............
rsakey = B55..............
detect = cd
mhz = 2700
cardmhz = 337
group = 1,2
emmcache = 1,1,2
[reader]
label = CSDR
description = cccam
protocol = cccam
device = XXXX.dyndns.org, 12122
user = user2
password = user2
inactivitytimeout = 30
group = 1,2
cccversion = 2.3.0
cccmaxhops = 2
ccckeepalive = 1
LOG
2013/11/05 14:43:01 A97188 p XXXX [cccam] connecting to XXX.dyndns.org:12122
2013/11/05 14:43:01 A97188 p XXXX [cccam] connect failed: Connection refused
Client
conf
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
bindwait = 20
nice = -1
maxlogsize = 512
[cs357x]
port = 12121
[cccam]
port = 12122
reshare = 2
ignorereshare = 1
version = 2.3.0
updateinterval = 300
minimizecards = 0
stealth = 0
reshare_mode = 0
[dvbapi]
enabled = 1
au = 1
user = local
boxtype = dreambox
[webif]
httpport = 80XX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 0.0.0.0-255.255.255.255
httpdyndns = XXXX.dyndns.org
user
[account]
user = local
au = 1
group = 1, 2
[account]
user = user2
pwd = user2
keepalive = 1
group = 1, 2
hostname = XXXX.dyndns.org, 12122
cccmaxhops = 2
cccreshare = 1
server
[reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A76..................................
rsakey = B55..................................
detect = cd
mhz = 2700
cardmhz = 337
group = 1,2
emmcache = 1,1,2
[reader]
label = XXXX
description = cccam
protocol = cccam
device = XXXX.dyndns.org, 12122
user = user2
password = user2
inactivitytimeout = 30
group = 1,2
cccversion = 2.3.0
cccmaxhops = 2
ccckeepalive = 1
LOG
2013/11/05 15:05:51 532D70 p XXXX configuration error!
2013/11/05 15:05:51 5498B8 c can't resolve XXXX.dyndns.org, 12122, error: No address associated with hostname
2013/11/05 15:05:51 5498B8 c encrypted cccam-client 95.222.201.XXX rejected (www, invalid ip)
2013/11/05 15:05:51 5498B8 c password for 'www' invalid!
2013/11/05 15:05:51 5498B8 c www disconnected from 95.222.201.XXX
2013/11/05 15:06:02 5498B8 c can't resolve XXXX.dyndns.org, 12122, error: No address associated with hostname
2013/11/05 15:06:02 5498B8 c encrypted cccam-client 95.222.201.XXX rejected (www, invalid ip)
2013/11/05 15:06:02 5498B8 c password for 'www' invalid!
2013/11/05 15:06:02 5498B8 c www disconnected from 95.222.201.XXX
Danke.
Gruß
BLRD
Hi, du hast ja überall die gleichen Ports, das geht nicht. In der Oscam config kannst du das Protokoll wählen, mit dem du weiter sharen willst. Mit der Oscam server holst du dir " Daten " von Karte oder mit remote Reader von einer anderen Box. Und mit der user kannst du definieren, wer was bekommt. Google mal nach Oscam Config Creator.
Hallo Samm909,
erst einmal Danke für Deine Antwort.
Auch deinen Rat mit den Config Creator habe ich mir angeschaut und nun bin ich noch mehr verwirrt. (Schwangschaftsdemenz?)
Kannst du bitte mir anhand meiner letzten Configs, dort die richtigen Werte eintragen?.
Danke.
VG
BLRD
Hr.Lehmann
08.11.13, 06:39
server
[reader]
label = um02
protocol = internal
device = /dev/sci0
caid = 1838
boxkey = A76..................................
rsakey = B55..................................
detect = cd
mhz = 2700
cardmhz = 337 Hier muß -1 stehen
group = 1,2 Jeder echte Reader hat eine eigene Gruppe , also z.B. 1 , Die Internetreader alle z.B. 2
emmcache = 1,1,2
Hi, hast du die Config mal getestet :coole0089:
Hi, du willst nur einen zweiten Clienten über Inet ?
Client:
Oscam Config
[global]
disablelog = 1
logfile = /tmp/oscam.log
clienttimeout = 3000
fallbacktimeout = 2900
cachedelay = 120
bindwait = 20
nice = -1
maxlogsize = 512
[dvbapi]
enabled = 1
au = 1
decodeforever = 1
user = local
boxtype = dreambox
[[webif]
httpport = XXXX
httpuser = XXXX
httppwd = XXXX
httphelplang = de
httprefresh = 10
httpallowed = 127.0.0.1,192.168.0.1-192.168.255.255
httpdyndns = 123.dyndns.org
Oscam User
[account]
user = local
au = 1
group = 1
Oscam Server
[reader]
label = um02
protocol = 357x
device = 123.dyndns.org,10000
user = 123
password = 123
group = 1
Will mich auch mal anhängen. Stehe irgendwie auf dem Schlauch. Habe eine Server Dream mit interner S*Y Karte, externer HD+ Karte, und einem Reader mit Daten von nem Kumpel. Möchte nun meine Clientbox (ebenfalls Dream 800) auf Oscam umstellen. HD+ wird hell. S*Y leider nicht. Was mache ich falsch?
Meine oscam Dateien auf den Server Dream:
oscam.server
# oscam.server generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r287
[reader]
label = SKY
description = SKY-S02
protocol = internal
device = /dev/sci0
caid = 1702,1833
boxkey = 1122334455667788
detect = cd
mhz = 368
cardmhz = 368
group = 1
emmcache = 1,1,2
[reader]
label = HD02
description = HD+
protocol = mouse
device = /dev/ttyUSB0
services = hd02
caid = 1843
boxkey = A***
rsakey = B***
detect = cd
mhz = 368
cardmhz = 368
group = 2
emmcache = 1,1,2
[reader]
label = Kumpel
description = C-Line
enable = 0
protocol = cccam
device = kumpel.dyndns.org:60617
user = user
password = pass
group = 3
cccversion = 2.2.1
cccreshare = 2
audisabled = 1
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r287
[global]
logfile = /var/log/oscam.log
nice = -1
maxlogsize = 200
preferlocalcards = 1
[cccam]
port = 33333
nodeid = 75959B1010D114CA
version = 2.3.0
reshare = 1
[dvbapi]
enabled = 1
au = 1
user = serverbox
boxtype = dreambox
[webif]
httpport = 1***
httpuser = m***
httppwd = 1***
httptpl = /var/etc/tpl
httphelplang = de
httprefresh = 10
httpshowpicons = 1
httpallowed = 0.0.0.0-192.168.255.255
aulow = 120
oscam.user
# oscam.user generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r287
[account]
user = serverbox
keepalive = 1
betatunnel = 1833.FFFF:1702
group = 1,2
cccignorereshare = 0
[account]
user = wohnzimmer
pwd = pass
description = wohnzimmer
caid = 1843,1702
uniq = 3
keepalive = 1
betatunnel = 1833.FFFF:1702
group = 1,2,3
services = hd02
cccreshare = 0
cccignorereshare = 0
So, hier meine aktuellen oscam Dateien auf der Client Dream:
oscam.server
[reader]
label=Cardserver
enable=1
protocol=cccam
device=192.168.178.57,3***
user = wohnzimmer
password = pass
group=1
cccversion=2.2.1
ccckeepalive=1
oscam.conf
# oscam.conf generated automatically by Streamboard OSCAM 1.20-unstable_svn SVN r7798
[global]
disablelog = 1
logfile = /dev/null
unlockparental = 1
nice = -1
waitforcards = 0
preferlocalcards = 1
lb_retrylimit = 1600
[cccam]
port = 3***
version = 2.2.1
reshare = 2
[dvbapi]
enabled = 1
user = local
oscam.user
[account]
user = local
group = 1
betatunnel = 1833.FFFF:1702
Wie gesagt, HD wird hell, S*y bleibt dunkel?
Nochmal zur Verständnisfrage: Ich habe 3 Karten/Reader auf der Serverbox. Muss dann die Clientbox auch 3 Reader in der oscam.server haben, oder reicht da einer? Ich würde sagen, es reicht einer! Richtig?
Passt irgendwas mit den Caid´s, betatunneln oder Gruppen nicht?
Auch ich habe hier nochmal eine Frage :
Es läuft Oscam Server auf PC unter Linux und Oscam Client auf Kathi UFS 910, alles wunderbar ! Ich habe viel Zeit darauf verwendet, AU hinzukriegen und habe es nie geschafft, die Karte musste immer mal in einen normalen Receiver. Jetzt brauche ich es aber wirklich, um EMMs blocken zu können. Was muss auf Server - und Clientseite konfiguriert werden ( DVBAPI etc. ), damit EMMs überhaupt entgegen genommen und dann natürlich gefiltert werden können ? Ich kriege es einfach nicht hin. Kann mir jemand helfen ?
Gebt Euch keine Mühe mehr. Es ist schon dunkel geworden. Das war's dann wohl ...
Powered by vBulletin® Version 4.2.5 Copyright ©2024 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.