UFS 902 Display tot nach FW update [Archiv]

estela

03.06.12, 21:50

Ja, zweimal. Hier nochmal der Bootlog:

Board: STb7100-mboard
other device

U-Boot 1.1.2 (STLINUX_2_0p1) (Mar 24 2008 - 11:22:43)

DRAM: 32 MB
write time out = 2, clock = 40
Flash: 16 MB
In: serial
Out: serial
Err: serial
pll0 freq 531
pll1 freq 399
Net: VFD_Driver Init
board_version = 0
Button_value = 7
Hit any key to stop autoboot: 1 0
## Booting image at a0040000 ...
Image Name: Linux 2.6
Image Type: SH-4 Linux Kernel Image (gzip compressed)
Data Size: 1715381 Bytes = 1.6 MB
Load Address: 84401000
Entry Point: 84402000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK

Starting kernel console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000 - 0x00000000 - 0 ...

Linux version 2.6.17.14_stm22_0037 (kdhong@localhost.localdomain) (gcc version 4.1.1 (STMicroelectronics/Linux Base 4.1.1-21)) #221 PREEMPT Mon Nov 30 17:28:22 CET 2009
STMicroelectronics STb7100 Reference board initialisation
STb7100 version 3.x
Built 1 zonelists
Kernel command line: console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000
st-coprocessor: Failed to reserve memory at 0x04000000
st-coprocessor: Failed to reserve memory at 0x04200000
PID hash table entries: 256 (order: 8, 1024 bytes)
Using tmu for system timer
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 26160k/41984k available (2853k kernel code, 15804k reserved, 360k data, 88k init)
PVR=04061100 CVR=30480000 PRR=00009100
I-cache : n_ways=2 n_sets=256 way_incr=8192
I-cache : entry_mask=0x00001fe0 alias_mask=0x00001000 n_aliases=2
D-cache : n_ways=2 n_sets=512 way_incr=16384
D-cache : entry_mask=0x00003fe0 alias_mask=0x00003000 n_aliases=4
Mount-cache hash table entries: 512
CPU: STb710x
NET: Registered protocol family 16
SCSI subsystem initialized
usbcore: registered new driver usbfs
usbcore: registered new driver hub
NET: Registered protocol family 2
IP route cache hash table entries: 512 (order: -1, 2048 bytes)
TCP established hash table entries: 2048 (order: 1, 8192 bytes)
TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
TCP: Hash tables configured (established 2048 bind 1024)
TCP reno registered
bigphysarea: Allocated 2984 pages at 0x847bb000.
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
Device probe found data for platform device lirc
lirc_dev: IR Remote Control driver registered, at major 61
lirc_dev: lirc_register_plugin: sample_rate: 0
lirc_dev: lirc_register_plugin: plugin lirc_stm owner 00000000
STM LIRC plugin has IRQ 125
Lirc STM: Using IRB mode
STMicroelectronics LIRC driver configured
STPIO layer initialised
VFD_Controller Type : NEW Kathrein VFD
STMicroelectronics ASC driver initialized
ttyAS0 at MMIO 0xb8032000 (irq = 121) is a asc
ttyAS1 at MMIO 0xb8033000 (irq = 120) is a asc
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
s_env_mac[0] = 0
s_env_mac[1] = 0
s_env_mac[2] = :
s_env_mac[3] = 5
s_env_mac[4] = 0
s_env_mac[5] = :
s_env_mac[6] = f
s_env_mac[7] = d
s_env_mac[8] = :
s_env_mac[9] = f
s_env_mac[10] = f
s_env_mac[11] = :
s_env_mac[12] = 1
s_env_mac[13] = 2
s_env_mac[14] = :
s_env_mac[15] = 3
s_env_mac[16] = 4
get ether addr = 0, 50, fd, ff, 12, 34
mac hi address = 3412, lowaddress = fffd5000
SMSC: --> init_module()
SMSC: Driver Version = 1.21
SMSC: Compiled: Apr 26 2009, 15:59:04
SMSC: Platform: ST40 STMICRO r3
SMSC: Driver Parameters
SMSC: lan_base = 0x00000000, driver will decide
SMSC: bus_width = 0, driver will autodetect
SMSC: link_mode = 0x7F, 10HD,10FD,100HD,100FD,ASYMP,SYMP,ANEG
SMSC: irq = 2
SMSC: int_deas = 0xFFFFFFFF, use platform default
SMSC: irq_pol = 1, IRQ output is active high
SMSC: irq_type = 1, IRQ output is Push-Pull driver
SMSC: rx_dma = 256, RX will use PIO
SMSC: tx_dma = 256, TX will use PIO
SMSC: dma_threshold = 200
SMSC: mac_addr_hi16 = 0x00003412
SMSC: mac_addr_lo32 = 0xFFFD5000
SMSC: debug_mode = 0x00000007
SMSC: tx_fif_sz = 0x00050000
SMSC: afc_cfg = 0xFFFFFFFF, driver will decide
SMSC: tasklets = 0, Tasklets disabled
SMSC: phy_addr = 0xFFFFFFFF, Use internal phy
SMSC: max_throughput = 0xFFFFFFFF, Use platform default
SMSC: max_packet_count = 0xFFFFFFFF, Use platform default
SMSC: packet_cost = 0xFFFFFFFF, Use platform default
SMSC: burst_period = 0xFFFFFFFF, Use platform default
SMSC: max_work_load = 0xFFFFFFFF, Use platform default
SMSC: -->Smsc911x_init(dev=0x846E55CC)
SMSC: --> Platform_Initialize
SMSC: Lan Base at 0xA2000000
SMSC: <-- Platform_Initialize
SMSC: dwLanBase=0xA2000000
SMSC_WARNING: LAN911x NOT Identified, dwIdRev==0xFFFFFFFF
SMSC: <--Smsc911x_init(), result=-19
SMSC_WARNING: error -19 registering device
SMSC: <-- init_module()
nwhw_config: device not found
ata1: SATA max UDMA/133 cmd 0xB9209000 ctl 0xB9209820 bmdma 0x0 irq 170
ata1: SATA link down (SStatus 0)
scsi0 : sata_stm
Generic ST boards onboard flash device: 0x01000000 (16.0Mb) at 0x00000000
Onboard_Flash: Found 1 x16 devices at 0x0 in 16-bit bank
Amd/Fujitsu Extended Query Table at 0x0040
Onboard_Flash: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.
Creating 8 MTD partitions on "Onboard_Flash":
0x00000000-0x00020000 : "Boot firmware : 0xA000.0000-0xA001.FFFF"
0x00040000-0x00200000 : "Kernel - 0xA004.0000-0xA01F.FFFF"
0x00200000-0x002a0000 : "Config FS - 0xA020.0000-0xA029.FFFF"
0x002a0000-0x004e0000 : "Root FS- 0xA02A.0000-0xA04D.FFFF"
0x004e0000-0x00ae0000 : "APP_Modules 0xA04E.0000-0xA0AD.FFFF"
0x00ae0000-0x00c00000 : "EmergencyRoot 0xA0AE.0000-0xA0BF.FFFF"
0x00c00000-0x01000000 : "OtherData 0xA0C0.0000-0xA0FF.FFFF"
0x00020000-0x00040000 : "BootConfiguration 0xA002.0000-0xA003.FFFF"
ST40-ehci ST40-ehci.2: ST EHCI Host Controller
ST40-ehci ST40-ehci.2: new USB bus registered, assigned bus number 1
ST40-ehci ST40-ehci.2: irq 169, io mem 0xb91ffe00
ST40-ehci ST40-ehci.2: USB 0.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb1: Product: ST EHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.17.14_stm22_0037 ehci_hcd
usb usb1: SerialNumber: STB7100_EHCI
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 1 port detected
Initializing USB Mass Storage driver...
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
usbcore: registered new driver libusual
pegasus: v0.6.13 (2005/11/13), Pegasus/Pegasus II USB Ethernet driver
usb 1-1: new high speed USB device using ST40-ehci and address 2
usb 1-1: Product: USB 2.0 SATA BRIDGE
usb 1-1: Manufacturer: Super Top
usb 1-1: SerialNumber: M6116A016V20
usb 1-1: configuration #1 chosen from 1 choice
scsi1 : SCSI emulation for USB Mass Storage devices
usbcore: registered new driver pegasus
usbcore: registered new driver asix
usbcore: registered new driver cdc_ether
usbcore: registered new driver net1080
usbcore: registered new driver zaurus
mice: PS/2 mouse device common for all mice
i2c /dev entries driver
stssc layer initialized
STMicroelectronics - Coprocessors st231 Init
st231-0 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4000000 size 0x00200000
cop. addr 0x04000000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
st231-1 Coprocessor -------------------------------------------
flags 0001 RAM start at 0xa4200000 size 0x00200000
cop. addr 0x04200000
Channels : Not defined
IRQ : not used
---------------------------------------------------------------
TCP bic registered
TCP highspeed registered
NET: Registered protocol family 1
NET: Registered protocol family 17
VFS: Mounted root (cramfs filesystem) readonly.
Freeing unused kernel memory: 88k freed
/etc/init.d/rcS running...
Remounting root file system in read-write mode...mount: Can't find / in /etc/fstab
: Success
mount: Mounting / on (null) failed: Success
[70G[[1;31mFAILED[0;39m]
/etc/rcS.d/S200mountfs: /etc/rcS.d/S200mountfs: 91: cannot create /etc/mtab: Read-only file system
mount: Can't find / in /etc/fstab
: Success
mount: Mounting / on (null) failed: Success
Mounting other file systems...[70G[ [1;32mOK[0;39m ]
Bringing up the loopback interface...[70G[ [1;32mOK[0;39m ]
Setting up hostname...(none)
[70G[ [1;32mOK[0;39m ]

BusyBox v1.1.0 (2006.03.02-09:48+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.

insmod: /lib/modules/2.6.17.14_stm22_0037: No such file or directory
insmod: vfd_driver.ko: no module by that name found
TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000

cannot fine test mode
config/start.sh does not exist.... running /app/start.sh
PARAM : boot_param_version=22

PARAM : board=stb7100ref_27
PARAM : bootcmd=bootm a0040000
PARAM : bootdelay=1
PARAM : ethaddr=00:50:fd:ff:12:34:56
PARAM : bootargs=console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000
PARAM : stdin=serial
PARAM : stdout=serial
PARAM : stderr=serial
PARAM : autoload=n
BOOT PARAM VERSION = 22
Check902.c main 84 Error
I2CDevAdapter[0] ReadWithoutStop Error.
UFS-902 found
vfd_driver: module license 'Marusys' taints kernel.
Fault in unaligned fixup: 0000 [#1]

Pid : 115, Comm: insmod
PC is at stpio_set_pin+0x28/0x60
PC : 84582588 SP : 86635ee0 SR : 40008000 TEA : 0bfdc3be Tainted: P
R0 : 07b8aab0 R1 : 0bfdc3be R2 : 0bfdc3ba R3 : 00000002
R4 : 7b8aab18 R5 : 00000001 R6 : 00000000 R7 : 40008000
R8 : 00000008 R9 : 00000000 R10 : c0164cf4 R11 : 0000000c
R12 : 84582560 R13 : 844299c0 R14 : 00000001
MACH: ffffffb6 MACL: c9c9ca13 GBR : 2956b7a8 PR : c0162248

Call trace:
[<c0164b00>] vfd_dev_fops+0x0/0xffffe960 [vfd_driver]
[<c0162758>] VFD_Number_Of_Digit_Set+0xb8/0x100 [vfd_driver]
[<c0164afc>] vfd_type+0x0/0xffffe964 [vfd_driver]
[<844299c0>] blocking_notifier_call_chain+0x0/0x40
[<c0164b08>] vfd_dev_fops+0x8/0xffffe960 [vfd_driver]
[<c0162db4>] vfd_init_func+0x194/0x3c0 [vfd_driver]
[<8442f760>] param_get_int+0x0/0x20
[<c0166008>] stb04xxx_vfd_init+0x8/0x20 [vfd_driver]
[<84683f80>] mutex_unlock+0x0/0x60
[<844299c0>] blocking_notifier_call_chain+0x0/0x40
[<c0164c3c>] __this_module+0xbc/0xffffe8e0 [vfd_driver]
[<c0164b80>] __this_module+0x0/0xffffe8e0 [vfd_driver]
[<8443a7de>] sys_init_module+0x9e/0x360
[<84405198>] syscall_call+0xc/0x10
[<8443a740>] sys_init_module+0x0/0x360

Segmentation fault
VFD PIO Already Opened
VFD PIO Already Opened
VFD PIO Already Opened
VFD_Controller Type : undefined
VFD_Number_Of_Digit_Set : Other Type : NOT implemented
VFD_Display_Write_On_Off : Other Type : NOT implemented
VFD_Display_DutyCycle_Write : Other Type : NOT implemented
rmmod: vfd_driver_902: No such file or directory
SysConf device Init
LMI_SYS VCR0 = 00d40000
LMI_SYS VCR1 = 0f041000
LMI_SYS MIM0 = 861a0247
LMI_SYS MIM1 = 01010022
LMI_SYS SCR = 00000000
LMI_SYS STR = 35b06455
LMI_SYS COC = 00000000
LMI_SYS SDRA0 = 08001900
LMI_SYS SDRA1 = 08001900
LMI_SYS CIC = 00000249
LMI_SYS SDMR0 = 00000000
LMI_SYS SDMR1 = 00000000
LMI_VID VCR0 = 00d40000
LMI_VID VCR1 = 17101000
LMI_VID MIM0 = 861a0247
LMI_VID MIM1 = 01010022
LMI_VID SCR = 00000000
LMI_VID STR = 35b06455
LMI_VID COC = 00000000
LMI_VID SDRA0 = 14001900
LMI_VID SDRA1 = 14001900
LMI_VID CIC = 00000249
LMI_VID SDMR0 = 00000000
LMI_VID SDMR1 = 00000000
TestModMgr::CheckTestMode CmdLine = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000

CMDLINE = console=ttyAS0,115200 root=/dev/mtdblock3 mem=41m bigphysarea=2984 coprocessor_mem=2m@0x04000000,2m@0x04200000

cannot fine test mode
TestModeMgr::CheckMode : TestMode Disabled
app launcher : insmod /app/modules/vfd_driver_902.ko
Child PID...
insmod: cannot insert `/app/modules/vfd_driver_902.ko': File exists (-1): File exists
Invoke insmod /app/modules/vfd_driver_902.ko : PID Parent= 125, Child = 227
Exit PID: 227, Child PID : 227