Archiv verlassen und diese Seite im Standarddesign anzeigen : Anfängerfrage für HS
Hallo,
Habe da mal ne frage zum HS
Möchte wohl HS machen und wollte einfach mal fragen ob dieses mit meiner Hardware überhaupt möglich ist.
vorhanden sind:
Sky Sport & Bundesliga Abo
Sagem DBox 2 für Sat
Netgear dg834gb Router
Vielen Dank im voraus
BWG
Christian
Hi,
sei erstmal herzlich Willkommen im Board.
Warscheinlich ist deine Abo-Karte eine V13 ?, siehe Beschriftung der Karte.
Besser wäre eine S02 aber mit der V13 geht das auch, nur halt mit ca. 3-4 Clienten.
In deine Sagem muß ein Multicam verbaut werden damit du deine Abo-Karte auslesen/weiter sharen kannst.
Wer soll denn der Client sein bzw. was für ein Receiver hat er denn ?
hui das geht ja fix hier :dsuper:
also der client wäre mein Büro ^^
auch mit ner sagem dbox 2 , die karte ist S02
was ist das für ein Multicam den ich brauche ?
danke
http://www.mega-kom.de/eshop/product_info.php/products_id/11434
Du hast Glück. In einer Sagem Box ist der Einbau eines Multicam am einfachsten. Kein Löten oder ähnliches. Nur einstecken.
bin begeistert wie Fix ihr seid
danke euch !!!!
Christian
edit:
Multicam ist bestellt melde mich wenn ich es bekommen und eingebaut habe..
hmm is noch nix da und morgen ist feiertag ;-(
was brauche ich denn noch an Software, momentan hab ich GLJ image drauf is das io ?
Mfg
Christian
GLJ Image ist ok.
Bei allem anderen muss dir aber jemand anderes helfen, da ich ja nur HS mit Homecamd innerhalb meiner Edision Boxen mache.
Das hilft dir in deinem Fall ja nicht weiter.
gasometer74
16.05.12, 21:25
hmm is noch nix da und morgen ist feiertag ;-(
was brauche ich denn noch an Software, momentan hab ich GLJ image drauf is das io ?
Mfg
Christian
Hi Christian,
habe 2009 auch eine Sagem Dbox 2 in Betrieb gehabt mit Gbox 2.25 als EMU damals lief diese sehr stabil.
hatte aber ein MD Image auf meinen DBoxen.
1.) EMU Gbox in DBox var/bin (emu) Rechte 755 (google nach np-ulc un schau nach "emu")
2.) softcam cfg einspielen var/key Rechte 644
# SoftCam EMM Log configuration
#
# Save EMM data
# 00 Don't save anything (default)
# 01 Save processed EMMs (/var/tmp/emmproc.bin)
# 02 Save rejected EMMs (/var/tmp/emmblock.bin)
# 03 Save both EMMs
L: { 00 }
# Check additional OSC Frequency !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in KHz , example 8MHz=08000
F: { 0000 }
# Check additional Baurate for ATR !!! ONLY FOR DBOX2 !!!
# 00 No Check (default)
# >0 Check on, Value in bit/s, example 81861
B: { 0000 }
# Enable TPScrypt Support
# *0 TPScrypt off
# *1 TPScrypt on (default)
# 1* don't use PTS on Viaccess cards
# 2* don't use PTS on Cryptoworks cards
# 3* don't use PTS on Viaccess and Cryptoworks cards
Y: { 00 }
# Empty RS232 buffer before writing
# 00 No reset
# 01 Reset Buffer (default)
E: { 01 }
# SoftCam Blocker/Filter definition
#
# 00 = Allow EMM (default for all)
# 01 = Block EMM addressed to:
# all card
# | shared address/provider
# | | unique address/hex_serial
# ----------------------------------
I: { 00 00 00 } Irdeto All SA UA
V: { 00 00 00 } Via - SA UA
S: { 00 00 00 } Seca - SA UA
N: { 00 00 00 } Nagra All SA UA
C: { 00 00 00 } Crypto All SA UA
O: { 00 00 00 } Conax - SA UA
D: { 00 00 00 } NDS All SA UA
# Timeout Definitions
#
T: { 00 02 01 } ATR timeout (normal*X), instruction timeout (normal*X)
# com1/com2 delays, all delays to be entered in decimal !
#
# Do NOT touch !!!!!!!!!!!!!!!!!!
# all timings should be 0, change only if you have problems.
T: { 01 02000 000 } Irdeto : byte delay (1e-6 s), instruction delay (1e-3 s)
T: { 02 00000 000 } Seca
T: { 03 00000 000 } Viaccess
T: { 04 00000 000 } Nagra
T: { 05 00000 000 } CryptoWorks
T: { 06 00000 000 } Geldkarte
T: { 07 00000 000 } Conax
T: { 08 00000 000 } NDS
# Use Crypto card bug to decode any CW, no matter of chid
#
# Cxxx configuration (is aktiv for the provider only if a config line is present)
# (ECM sample to be used to get the cw's with Cxxx)
#
# Provider provider chid - that is present on the card for that provider
# || || || ||
# UPC-Astra
# 8: { 8D } A4 4C 00 00 2E 20 00 2B 83 01 8D 8C 03 20 01 00 8E 02 00 00 C5 01 00 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00
# Digiturk
# 8: { C1 } A4 4C 00 00 31 28 00 2E 83 01 C1 8C 03 89 19 19 8E 02 00 00 8F 01 A9 91 01 55 DB 10 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 DF 08 00 00 00 00 00 00 00 00
# Use constant CW's for
# caid pid CW0 ... CW1 ...
#0: { 01 00 56 00 { 00 11 22 33 44 55 66 77 88 99 AA BB CC DD EE FF }
3.) gbox cfg instalallieren var/keys Rechte 644
# gbox config file
# Task type
# 00 ** normal mode gbox mode (no season, use Multicam instead)
# 01 ** Season Emulation in a Irdeto allcam chid 0602 nonZ
# 10 ** Season Emulation in a Irdeto allcam chid 1702 nonZ
# 11 ** Season Emulation in a Irdeto allcam chid 1702 Z
# 12 ** Season Emulation in a Irdeto allcam chid 1722 Z
# 13 ** Season Emulation in a Irdeto allcam chid 1762 Z
# ** *1 Com port to use for season emulatiom (1 or 2)
# ** 0* Use CTS for RST detection
# ** 1* Use DCD for RST detection
# ** ** 9600 = Baudrate to be used (working only on dbox2)
W: { 00 00 } 9600
# gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }
# Display ECM messages on Konsole
# 00 don't show any ECM's
# 01 show only valid ECM's
# 02 show valid and bad ECM's with complete data display
C: { 01 }
# Display EMM messages on Konsole
# *0 don't show any EMM's
# *1 show only valid EMM's
# *2 show valid and bad EMM's with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01}
# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 02 }
# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }
# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this !!!!!
H: { 01 }
# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }
# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
# mypass (use user=root and pass=mypass for nhttpd)
O: { 00 } 192.168.1.4
# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 00 } 192.168.1.4
# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don't use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 00 12 } 192.168.178.27 8024
# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW's, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW's in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x* invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { F002 }
# =================================== =================================== =======
# extra options to override default seting in case you expirience Problems,
# normaly these setings are not required.
#
# cpu, api, cw write method
#
# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)
J: { 02 03 00 00 00 }
# Files, folders, devices
# folder/device comment
#
F: { 01 } /var/tmp/pmt.tmp // pmt file
F: { 02 } /var/tmp/emm.info // key update log file
F: { 03 } /var/tmp/ecm.info // ecm info file
F: { 04 } /var/tmp/atack.txt // atack info file
F: { 11 } /var/keys // folder for config files
F: { 12 } /var/tmp // folder for temporary file
F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0 // ca device
#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
#F: { 23 } /dev/dvb/adapter0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw's (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot1
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
# For overclocking freaks, Clocking internal STB04xxx slots with:
# 1=7.80MHz 2=6.30MHz 3=5.25MHz 4=4.50MHz 5=3.94MHz 6=3.50MHz 7=3.15MHz
# Irdeto works fine on 7.8MHz, all other fine on 6.30MHz or 5.25MHz
# The Dream has not a clean clock signal, some cards that are sensitive will
# refuse to work even on 3.5MHz, thats why 3.15MHz is the default value there.
# On other STB04xxx recievers the same cards work with 6.30MHz
#
#F: { 51 } 02 // irdeto
#F: { 52 } 03 // seca
#F: { 53 } 03 // viaccess
#F: { 54 } 03 // nagra
#F: { 55 } 03 // crypto
#F: { 57 } 03 // conax
#F: { 58 } 03 // nds
4.) config in cwhsare cfg var/keys Rechte 644 anpassen z.Bsp.
server
I: { 03 }
N: { 00 00 00 30 2600 4800 }
X: { 05 }
M: { ip. Server Box { AB333441 }}
D: { ip. Client Box { 8010 8010 { AA242456 { 5 5 }}}}
client var/keys Rechte 644
I: { 03 }
#N: { 00 00 00 30 2600 4800 }
X: { 05 }
M: { ip Client Box { AA242456 }}
D: { ip server Box { 8010 8010 { AB333441 { 5 5 }}}}
so sollte es eigentlich funzen!
eulalia025
17.05.12, 11:21
hmm is noch nix da und morgen ist feiertag ;-(
was brauche ich denn noch an Software, momentan hab ich GLJ image drauf is das io ?
Mfg
Christian
Hey zum GLJ Image nur noch CCcam 2.3.0 und Newcs 1.65 (kannste dir online holen) und installieren. In die Serverbox in die CCcam.config eine F-Linie eintragen und in die Clientbox eine C-Linie eitragen. Gruß
wie müssten diese lines dann aussehen ?
meine cccam.cfg sieht so aus:
F: user1 pass1
#
N: 127.0.0.1 12000 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
is das mit der ip richtig so , oder muss da meine ip von der box rein ?
Mfg
eulalia025
18.05.12, 21:32
wie müssten diese lines dann aussehen ?
meine cccam.cfg sieht so aus:
F: user1 pass1
#
N: 127.0.0.1 12000 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
#
is das mit der ip richtig so , oder muss da meine ip von der box rein ?
Mfg
Server F Linie ist richtig :15:
Client Box eine C Linie wenn da auch CCcam läuft.
C: IP der Serverbox 12000 user1 pass1
N Linie brauchst du bei Newcam. Da muß dir aber ein anderer helfen, ich kenne mich da nicht so aus.
Gruß
er hat eine zweier box ! die karte wird per n line eingelesen und an cccam weitergereicht
anleitung hierfür hab ich schon gepostet ! einfach mal die sufu nutzen
eulalia025
18.05.12, 22:30
er hat eine zweier box ! die karte wird per n line eingelesen und an cccam weitergereicht
anleitung hierfür hab ich schon gepostet ! einfach mal die sufu nutzen
Ok gebe mich geschlagen :164: Hab selbst die dbox nur als Client und als Server ne dream. Sorry
server cccam.cfg
F: user1 pass1
N: ip der Dbox 25030 Reiner Zufall 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER LISTEN PORT : 12000
SHOW TIMING : yes
client cccam.cfg
C: ip der dbox 25030 user1 pass1
http://prntscr.com/9fcnd
wenn es gehen würde könnte ich doch im Newcs unter user status doch den clienten sehen oder ?
Mfg
Christian
edit:
nach viel fummelei sehe ich nun auch den 2 clienten online aber bild bleibt dunkel
http://prntscr.com/9fhp8
bin ich auf dem Richtigen weg ?
Danke schonmal
so habe jetzt den Server und einen Client am laufen
Server cccam.cfg
F: user1 pass1
N: 192.168.0.110 25030 server passwort 01 02 03 04 05 06 07 08 09 10 11 12 13 14
SERVER LISTEN PORT : 12000
SHOW TIMING : yes
client cccam.cfg
C: 192.168.0.110 12000 user1 pass1 2 0 1 { 0:0:2 }
wie würde ich jetzt ne 3 oder sogar eine 4 box ans laufen bekommen ?
BWG
Christian
wietere f-line und ne c-line eintragen oder ist es ne andere box ??
Hi, den Port mußt du ändern.
C: ip der dbox 12000 user1 pass1
Vergiß es
nee wäre auch eine dbox2
also auf dem Server noch ne F line
F: user2 user2
und auf dem clienten
C: ip der server box 12000 user2 user2
Richtig ?
hatte es gestern so versucht aber irgendwie blieb es dunkel ;-(
ps: beim umschalten zeigt er immer Hops 1 | srv 192.168.0.110 ist das Richtig ?
Bwg
Powered by vBulletin® Version 4.2.5 Copyright ©2025 Adduco Digital e.K. und vBulletin Solutions, Inc. Alle Rechte vorbehalten.