OSCAM Konfiguration mit easymouse2 und S*Y V13

[godi.d]

Hallo Leute,
ich habe auf meinem Ubuntu OSCAM installiert. Nun benötige ich OSCAM Einstellungen, um meine S*Y V13 auslesen zu können.

Information:

easymouse2
3.3 v
phoenix
3.579mhz

oscam

oscam.server



[reader]
label = s*y
protocol = mouse
device = /dev/ttyUSB0
caid = 09C4
detect = cd
mhz = 357
cardmhz = 357
ident = 09C4:000000
group = 1
emmcache = 1,3,2


oscam.user



[account]
user = local
pwd = local
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 2
au = 1
services =
betatunnel = 1833.FFFF:1702
ident =
cccmaxhops = 2
keepalive = 1
numusers = 0
penalty = 0


oscam.conf



[global]
logfile = stdout
fallbacktimeout = 2500
cachedelay = 120
nice = -1
preferlocalcards = 1
saveinithistory = 1

[dvbapi]
enabled = 1
au = 1
boxtype = dreambox
user = local
pmt_mode = 0

[webif]
httpport = 16001
httpuser = root
httppwd = local
httprefresh = 10
httpallowed = 127.0.0.1,0.0.0.0-255.255.255.255
httphideidleclients = 0
httpreadonly = 0
httpsavefullcfg = 0



LOG


2011/12/11 1:23:22 81Axxxx r reader s*y initialized (device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2011/12/11 1:23:23 0 s*y card detected
2011/12/11 1:23:27 81xxxx r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xxx
2011/12/11 1:23:29 81xxxx r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/11 1:23:30 81xxxx r [videoguard2-reader] no boxID available
2011/12/11 1:23:30 81xxxx r card system not supported
2011/12/11 1:23:30 81xxxx r Normal mode failed, reverting to Deprecated Mode
2011/12/11 1:23:35 81xxxx r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx xx
2011/12/11 1:23:36 81xxxx r Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2011/12/11 1:23:38 81xxxx r [videoguard2-reader] no boxID available
2011/12/11 1:23:38 81xxxx r card system not supported
2011/12/11 1:23:38 81xxxx r card initializing error


Für jede Hilfe wäre ich sehr dankbar!!

Danke im Voraus!

Grüße
godi.d

[zeus-crew]

http://www.oscamconfigs.info/34/sky-de-nds-internal-cardreader/

device etc ist nur noch anzupassen

[godi.d]

Hi, danke für die Hilfe. Bekomme mit der folgenden Einstellung:

Einstellung


[reader]
label = S*yDE
Protocol = internal
detect = CD
device = /dev/ttyUSB0
Group = 1
EMMCache = 1,3,2
CAID = 09c4
ident = 09c4:000000
ecmwhitelist = 09c4@000000:46,90


folgende Meldung:

Meldung


2011/12/11 10:32:26 9DCxxxx r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/12/11 10:32:26 9DCxxxx r recompile with internal reader support.
2011/12/11 10:32:26 9DCxxxx r Cannot open device: /dev/ttyUSB0
2011/12/11 10:32:26 9DCxxxx h HTTP Server listening on port 16001
2011/12/11 10:33:26 9DCxxxx r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/12/11 10:33:26 9DCxxxx r recompile with internal reader support.
2011/12/11 10:33:26 9DCxxxx r Cannot open device: /dev/ttyUSB0
2011/12/11 10:34:26 9DCxxxx r ERROR, you have specified 'protocol = internal' in oscam.server,
2011/12/11 10:34:26 9DCxxxx r recompile with internal reader support.
2011/12/11 10:34:26 9DCxxxx r Cannot open device: /dev/ttyUSB0


Habe ich OSCAM falsch installiert oder ist die Einstellung falsch?

Danke im Voraus!

Grüße
godi.d

[zeus-crew]

ich dacht du hast eine easymouse ?
[reader]
label = mycard
protocol = mouse
device = /dev/ttyUSB1 bzw 0 ! da muste schauen an welchem usb das ist
caid = 09c4
detect = cd
mhz = 600
cardmhz = 357
group = 1
emmcache = 1,3,2

danach system neu starten ! dann soll es gehen

[godi.d]

Ja, ich habe eine easymouse 2. OK, dann muss es als protokoll mouse sein. Ich versuche es jetzt (Daumen drücken xD).

Leider nicht geklappt.

Log



2011/12/11 11:50:10 0 s waiting for local card init
2011/12/11 11:50:10 96Dxxxx h HTTP Server listening on port 16001
2011/12/11 11:50:13 96Cxxxx r reader s*y initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
2011/12/11 11:50:13 0 s*y card detected
2011/12/11 11:50:21 96Cxxxx r Error activating card.
2011/12/11 11:50:29 96Cxxxx r Error activating card.
2011/12/11 11:50:37 96Cxxxx r Error activating card.

[sammy909]

Hi, schreib das mal mit in die server.


BoxID = 12345678

[godi.d]

Leider auch nicht.

Hier noch mal die komplette Log:



12:54:49 0 s log_list_thread thread started
12:54:49 0 s >> OSCam << cardserver started, version 1.20-unstable_svn, build #6073 (i686-pc-linux)
12:54:49 0 s version=1.20-unstable_svn, build #6073, system=i686-pc-linux, nice=-1
12:54:49 0 s client max. idle=120 sec, debug level=0
12:54:49 0 s max. logsize=10 Kb, loghistorysize=4096 bytes
12:54:49 0 s client timeout=5000 ms, fallback timeout=2500 ms, cache delay=120 ms
12:54:49 0 s Cannot open file "/usr/local/etc/oscam.services" (errno=2 No such file or directory)
12:54:49 0 s userdb reloaded: 1 accounts loaded, 0 expired, 0 disabled
12:54:49 0 s signal handling initialized (type=sysv)
12:54:49 0 s can't open file "/usr/local/etc/oscam.srvid" (err=2 No such file or directory), no service-id's loaded
12:54:49 0 s can't open file "/usr/local/etc/oscam.tiers" (err=2 No such file or directory), no tier-id's loaded
12:54:49 0 s can't open file "/usr/local/etc/oscam.provid" (err=2 No such file or directory), no provids's loaded
12:54:49 0 s can't open file "/usr/local/etc/oscam.ird" (errno=2 No such file or directory) irdeto guessing not loaded
12:54:49 0 s Starting listener 0
12:54:49 0 s monitor: disabled
12:54:49 0 s Starting listener 0
12:54:49 0 s camd35: disabled
12:54:49 0 s Starting listener 0
12:54:49 0 s cs378x: disabled
12:54:49 0 s Starting listener 0
12:54:49 0 s newcamd: disabled
12:54:49 0 s Starting listener 0
12:54:49 0 s pandora: disabled
12:54:49 0 s Starting listener 0
12:54:49 0 s radegast: disabled
12:54:49 0 s http thread started
12:54:49 0 s reader check thread started
12:54:49 0 s check thread started
12:54:49 0 s creating thread for device /dev/ttyUSB0
12:54:49 0 s loadbalancer: can't read from file /tmp/.oscam/stat
12:54:49 0 s waiting for local card init
12:54:49 9D6xxxx h HTTP Server listening on port 16001
12:54:51 9D6xxxx r reader s*y initialized (device=/dev/ttyUSB0, detect=cd, mhz=600, cardmhz=357)
12:54:52 0 s*y card detected
12:55:00 9D6xxxx r Error activating card.
12:55:07 9D6xxxx r Error activating card.
12:55:15 9D6xxxx r Error activating card.




Neuer Stand:

LOG



2011/12/11 14:07:23 827C3D8 h HTTP Server listening on port 16001
2011/12/11 14:07:26 827AA50 r reader mouse initialized (device=/dev/ttyUSB1, detect=cd, mhz=600, cardmhz=600)
2011/12/11 14:07:26 0 mouse card detected
2011/12/11 14:07:31 827AA50 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2011/12/11 14:07:32 827AA50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2011/12/11 14:07:33 827AA50 r card system not supported
2011/12/11 14:07:33 827AA50 r Normal mode failed, reverting to Deprecated Mode
2011/12/11 14:07:37 827AA50 r ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2011/12/11 14:07:38 827AA50 r Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] parental lock setting: FF FF FF FF
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] type: VideoGuard *** Germany, caid: 09C4
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] serial: xxxxxx, BoxID: 12345678, baseyear: 200x
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] ready for requests
2011/12/11 14:07:41 827AA50 r found cardsystem videoguard2
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] mouse card detected
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] type: VideoGuard *** Germany
2011/12/11 14:07:41 827AA50 r [videoguard2-reader] tier: 13xx, expiry date: xxxx/0x/0x-00:xx:16
2011/12/11 14:07:41 0 s init for all local cards done
2011/12/11 14:07:41 0 s anti cascading disabled


Ist das ok oder noch nicht ganz?

[sammy909]

Sollte eigentlich jetzt laufen.

Edit. Hmm, das ist komisch.


Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz

[zeus-crew]

Sollte eigentlich jetzt laufen.

Edit. Hmm, das ist komisch.


Maximum frequency for this card is formally 5 Mhz, clocking it to 6.00 Mhz

einfach in global so abändern mhz = 500

[godi.d]

Ich versuche gerade dem Client (Opticum HD X403p) den Server zu hinterlegen.

oscam.conf



[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 1

[newcamd]
port = 34000@09c4:000000
key = 0102030405060708091011
allowed = 0.0.0.0-255.255.255.255
keepalive = 1


oscam.user



[account]
user = user
pwd = user
au = mouse
group = 1
services = s*y
caid = 09c4
ident = 09c4:000000
monlevel = 2
disabled = 0
keepalive = 1



LOG



2011/12/11 15:12:57 98A6B40 c WARNING: invalid client tcp_conn_close()
2011/12/11 15:12:57 98A6B40 c anonymous disconnected from 192.168.xx.xx
2011/12/11 15:12:57 98A6B40 c thread B779xxxx ended!


Erhalte beim Client Server Close. Was kann das bedeuten bzw. wie kann ich es noch testen?

Danke im Voraus!

Grüße
godi.d

[godi.d]

Erhalte dann:

Maximum frequency for this card is formally 5 Mhz, clocking it to 5.00 Mhz

Grüße
godi.d

[zeus-crew]

easymouse2
3.3 v
phoenix
3.579mhz <----------------- auf 5 mhz stellen

[godi.d]

Ist wie folgt eingestellt:
easymouse2
3.3 v
phoenix
3.579mhz

oder soll es auf
->Y5?

oscam.server



mhz = 500
cardmhz = 500

[zeus-crew]

an der easymouse2
is glaub rechts und dann in die zweite possition

[godi.d]

an der easymouse2
is glaub rechts und dann in die zweite possition

Ich habe das Gerät:
http://www.satking.de/out/pictures/z1/sol_frepro-025_pic1_z1.png