m4ddox
17.02.11, 22:46
Hallo!
Ich habe bei einer dBox2 von Nokia (2x Flash Intel) ein Problem beim flashen.
Sie fährt auch nicht mehr ordentlich hoch, sondern bleibt im Keywelt Bild hängen. Das Display zeigt dann auch garnichts mehr an. Erst wird das Keywelt bild auf dem Display angezeigt, dann Linux inside mit dem Pinguin, und dann leuchtet es nur noch grün, also keine Anzeige mehr. Auf dem TV wird das Keywelt Bild angezeigt.
Hier mal das was über den Port beim starten kommt:
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:50:1d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs+lzma)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.17.3 (2011-02-11 14:04:29 CET)
starting pid 8, tty '': '/etc/init.d/rcS'
mount: using /etc/fstab
##### Image-Version: Keywelt_Jan2011_V2.00 #####
Fri Feb 11 14:15:00 UTC 2011
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: dvb-core.o: module not found
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
insmod: unresolved symbol dvb_register_i2c_bus
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: unresolved symbol dvb_register_adapter
insmod: unresolved symbol dvb_register_device
insmod: unresolved symbol dvb_add_frontend_ioctls
insmod: unresolved symbol add_timer
insmod: unresolved symbol avia_av_set_stc
insmod: /lib/modules/2.4.37.11-dbox2/kernel/fs/lockd/nockd.o: No such file or di
rectory
insmod: unresolved symbol avia_gt_gv_copyarea
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: unresolved symbol avia_gt_ir_exit
insmod: /lib/modules/2.4.37.11-dbox2/misc/omc.o: No such file or directory
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pig_show
udhcpc (v1.17.3) started
Setting IP address 0.0.0.0 on eth0
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_gt_napi_dvr_send
insmod: unresolved symbol avia_av_write
insmod: warning: kernel-module version mismatch
multicam was compiled for kernel version 2.4.37-dbox2
while this kernel is version 2.4.37.11-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
ln: /dev/dvb/adapter0/demux1: No such file or directory
ln: /dev/dvb/adapter0/dvr1: No such file or directory
ln: /dev/dvb/card0: No such file or directory
insmod: unresolved symbol memcmp
insmod: unresolved symbol nlmclnt_proc
starting pid 181, tty '': '/etc/init.d/start'
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.320 2011/01/
22 12:17:57 seife Exp $
[sectionsd] FreeSat enabled
[sectionsd] Caching max 3000 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
[sectionsd] getUTC: open: No such file or directory
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead
Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
[frontend.cpp:CFrontend:63] /dev/dvb/adapter0/frontend0: No such file or directo
ry
gxpr: applet not found
[sectionsd] getUTC: open: No such file or directory
/var/plugins/operations camd_start
[sectionsd] getUTC: open: No such file or directory
starte camd2
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
[camd] /dev/dvb/adapter0/ca0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
/tmp/currentservices.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
/var/plugins/operations sect_renice
[sectionsd] getUTC: open: No such file or directory
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[CVideo::setVideoFormat] output format: 4:3(LB)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] getUTC: open: No such file or directory
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[sectionsd] getUTC: open: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[sectionsd] getUTC: open: No suc
h file or directory
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[sectionsd] getUTC: open: No such file or directory
setPauseScanning false
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] getUTC: open: No such file or directory
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
[sectionsd] getUTC: open: No such file or directory
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[sectionsd] getUTC: open: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[sectionsd] getUTC: open: No such file or directory
/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /
lib/liblcddisplay.so.0)
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[sectionsd] getUTC: open: No suc
h file or directory
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...neutrino: /lib/libpng12.so.
0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[sectionsd] getUTC: open: No such file or directory
Das kommt wenn ich versuche mit dem Bootmanager zu flashen:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-92.ba.45.07.00.00-0b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 173832
verify sig: 262
Branching to 0x40000
U-Boot 2010.03 (Tuxbox) (Feb 11 2011 - 14:00:53)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/Keywelt_V2.00_Januar_2x_SQUASHFS_2011.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
und das kommt wenn ich es mit dem Hallenberg Assistenten versuche:
Netzwerkaktivitäten:
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
Und das steht in der Comportausgabe der dbox:
µdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.99, My IP 192.168.2.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################## ###############
################################################## ########
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################## ###############
##################################################
done
Bytes transferred = 586812 (8f43c hex)
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626984 Bytes = 612.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 586748 Bytes = 573 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f1f000, end 01fae3fc ... OK
Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.2.202:192.168.2.99:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:50:1d
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.2.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.2.202, domain=, nis-domain=(none),
bootserver=192.168.2.99, rootserver=192.168.2.99, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
crc error<6>Freeing initrd memory: 572k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
-------------------------------------------------------------
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 001B77B818F6 erhalten
BootP: Request von 001B77B818F6 erhalten
BootP: Request von 7C6D621A7CE4 erhalten
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek PCIe FE Family Controller (0)
IP-Adresse des Netzwerkadapters: 192.168.2.99
IP-Adresse die die dbox bekommt: 192.168.2.202
Betriebssystem: Professional (Build 7600)
CPU 1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz @ 1496 MHz
Dateiname des Images: Keywelt_V2.00_Januar_2x_SQUASHFS_2011.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.4
------ Powered by http://www.dboxservice-hallenberg.de ------
Hab schon Stundenlang gegoogelt aber da steht nur das es ein Netzwerkfehler sein kann, was aber theoretisch nicht sein kann weil ich erstens alles aus hab (Firewall, Antivir) und zweitens es mit 4 anderen Boxen wunderbar funktioniert.
Vielleicht wisst Ihr ja wie ich die Box noch retten kann?!
Mfg
m4ddox
Ich habe bei einer dBox2 von Nokia (2x Flash Intel) ein Problem beim flashen.
Sie fährt auch nicht mehr ordentlich hoch, sondern bleibt im Keywelt Bild hängen. Das Display zeigt dann auch garnichts mehr an. Erst wird das Keywelt bild auf dem Display angezeigt, dann Linux inside mit dem Pinguin, und dann leuchtet es nur noch grün, also keine Anzeige mehr. Auf dem TV wird das Keywelt Bild angezeigt.
Hier mal das was über den Port beim starten kommt:
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
JFFS2 version 2.2. (NAND) (C) 2001-2003 Red Hat, Inc.
squashfs: version 3.0 (2006/03/15) Phillip Lougher
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:50:1d
loop: loaded (max 8 devices)
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x005e0000 : "root (squashfs+lzma)"
0x005e0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
VFS: Mounted root (squashfs filesystem) readonly.
Mounted devfs on /dev
Freeing unused kernel memory: 60k init
init started: BusyBox v1.17.3 (2011-02-11 14:04:29 CET)
starting pid 8, tty '': '/etc/init.d/rcS'
mount: using /etc/fstab
##### Image-Version: Keywelt_Jan2011_V2.00 #####
Fri Feb 11 14:15:00 UTC 2011
event: $Id: event.c,v 1.12 2003/09/30 05:45:38 obi Exp $
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
tuxbox: no IDE-Interface detected
Detected STB:
Vendor: Nokia
Model: D-BOX2
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: dvb-core.o: module not found
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
[i2c-8xx]: mpc 8xx i2c init
[i2c-8xx]: adapter: 0
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
$Id: cam.c,v 1.30 2004/01/10 16:36:34 alexw Exp $
insmod: unresolved symbol dvb_register_i2c_bus
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: unresolved symbol dvb_register_adapter
insmod: unresolved symbol dvb_register_device
insmod: unresolved symbol dvb_add_frontend_ioctls
insmod: unresolved symbol add_timer
insmod: unresolved symbol avia_av_set_stc
insmod: /lib/modules/2.4.37.11-dbox2/kernel/fs/lockd/nockd.o: No such file or di
rectory
insmod: unresolved symbol avia_gt_gv_copyarea
lcd.o: init lcd driver module
lcd.o: found KS0713/SED153X lcd interface
insmod: /lib/modules/2.4.37.11-dbox2/misc/fvb-core.o: No such file or directory
insmod: unresolved symbol avia_gt_ir_exit
insmod: /lib/modules/2.4.37.11-dbox2/misc/omc.o: No such file or directory
insmod: unresolved symbol avia_av_set_sample_rate
insmod: unresolved symbol avia_gt_pig_show
udhcpc (v1.17.3) started
Setting IP address 0.0.0.0 on eth0
Sending discover...
Sending discover...
Sending discover...
No lease, forking to background
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol dvb_unregister_i2c_device
insmod: unresolved symbol avia_av_stream_type_set
insmod: unresolved symbol avia_gt_dmx_get_ucode_info
insmod: unresolved symbol avia_gt_napi_dvr_send
insmod: unresolved symbol avia_av_write
insmod: warning: kernel-module version mismatch
multicam was compiled for kernel version 2.4.37-dbox2
while this kernel is version 2.4.37.11-dbox2
DBox2 Multicam Driver v1.01 skars & doz21 :)
ln: /dev/dvb/adapter0/demux1: No such file or directory
ln: /dev/dvb/adapter0/dvr1: No such file or directory
ln: /dev/dvb/card0: No such file or directory
insmod: unresolved symbol memcmp
insmod: unresolved symbol nlmclnt_proc
starting pid 181, tty '': '/etc/init.d/start'
Please press Enter to activate this console. $Id: sectionsd.cpp,v 1.320 2011/01/
22 12:17:57 seife Exp $
[sectionsd] FreeSat enabled
[sectionsd] Caching max 3000 events
[sectionsd] Caching 4 days
[sectionsd] Caching 12 hours Extended Text
[sectionsd] Events are old 120min after their end time
/var/tuxbox/config/zapit/epgfilter.xml: No such file or directory
/var/tuxbox/config/zapit/dvbtimefilter.xml: No such file or directory
/var/tuxbox/config/mybouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[sectionsd] open dmx: No such file or directory
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[ConfigFile] Unable to open file /var/tuxbox/config/timerd.conf for reading.
[timerd] woke up from timer? false!
/var/plugins/operations camd_init
[sectionsd] getUTC: open: No such file or directory
/var/plugins/operations cardserver_start
$Id: zapit.cpp,v 1.440k 2009/09/18 20:30:00 rhabarber1848 & Worschter & SnowHead
Exp $
[zapit] PMT update enabled
[frontend] uncommitted_switch_mode 0 auto_fec 0
[frontend.cpp:CFrontend:63] /dev/dvb/adapter0/frontend0: No such file or directo
ry
gxpr: applet not found
[sectionsd] getUTC: open: No such file or directory
/var/plugins/operations camd_start
[sectionsd] getUTC: open: No such file or directory
starte camd2
[camd2] EMM : active
[camd2] Socket=/tmp/camd.sock02
[camd] /dev/dvb/adapter0/ca0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[getservices] /var/tuxbox/config/zapit/myservices.xml found.
[getservices] dup transponder id 1 onid 85
[getservices] dup transponder id 2 onid 85
[getservices] dup transponder id 3 onid 85
[getservices] dup transponder id 11 onid 85
/var/tuxbox/config/zapit/ubouquets.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
/tmp/currentservices.xml: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[controld] Boxtype detected: (1, Nokia D-BOX2)
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld] /dev/dvb/adapter0/video0: No such file or directory
[controld]: ROUTEVIDEO v1 = 5 a1 = 1 v2 = 1 a2 = 1 v3 = 0 a3 = 1 fblk=1
/var/plugins/operations sect_renice
[sectionsd] getUTC: open: No such file or directory
[aviaext.cpp:CAViAext:37] /dev/dbox/aviaEXT: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[CVideo::setVideoFormat] output format: 4:3(LB)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] getUTC: open: No such file or directory
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[sectionsd] getUTC: open: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
nhttpd: /lib/libpng12.so.0: no version information available (required by /lib/l
iblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[sectionsd] getUTC: open: No suc
h file or directory
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[sectionsd] getUTC: open: No such file or directory
[yhttpd] Webserver starting...
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[sectionsd] getUTC: open: No such file or directory
setPauseScanning false
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
[sectionsd] getUTC: open: No such file or directory
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[sectionsd] getUTC: open: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
[sectionsd] getUTC: open: No such file or directory
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[sectionsd] getUTC: open: No such file or directory
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
neutrino: /lib/libpng12.so.0: no version information available (required by neut
rino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
setPauseScanning false
[sectionsd] getUTC: open: No such file or directory
/bin/nhttpd: /lib/libpng12.so.0: no version information available (required by /
lib/liblcddisplay.so.0)
[audio.cpp:openDevice:55] /dev/dvb/adapter0/audio0: No such file or directory
[video.cpp:openDevice:52] /dev/dvb/adapter0/video0: No such file or directory
[yhttpd] Webserver nhttpd/3.1.8 (yhttpd_core/1.2.0)
[LCDFONT] initializing core...
[LCDFONT] adding font /share/fonts/micron.ttf...[sectionsd] getUTC: open: No suc
h file or directory
OK (Micron/Regular)
[LCDFONT] adding font /share/fonts/micron_bold.ttf...neutrino: /lib/libpng12.so.
0: no version information available (required by neutrino)
neutrino: /lib/libpng12.so.0: no version information available (required by /lib
/liblcddisplay.so.0)
OK (Micron/Bold)
[LCDFONT] adding font /share/fonts/pakenham.ttf...OK (Pakenham/Regular)
[LCDFONT] Intializing font cache...
[sectionsd] getUTC: open: No such file or directory
starting /bin/neutrino
[neutrino] frameBuffer Instance created
/dev/fb/0: No such file or directory
framebuffer not available.
FBIOPUT_VSCREENINFO: Bad file descriptor
FBIOGET_FSCREENINFO: Bad file descriptor
[neutrino] Error while setting framebuffer mode
Neutrino exited with nonzero exit status, restarting...
[sectionsd] getUTC: open: No such file or directory
Das kommt wenn ich versuche mit dem Bootmanager zu flashen:
debug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID 01-92.ba.45.07.00.00-0b
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
dbox2:root> debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Given up BOOTP/TFTP boot
boot net failed
Flash-FS bootstrap loader (v1.5)
Found Flash-FS superblock version 3.1
Found file /root/platform/nokia-dbox2/kernel/os in Flash-FS
debug: Got Block #0036
will verify ELF image, start= 0x800000, size= 173832
verify sig: 262
Branching to 0x40000
U-Boot 2010.03 (Tuxbox) (Feb 11 2011 - 14:00:53)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
Scanning JFFS2 FS: ... done.
env: found console with value ttyS0
env: found lcd_inverse with value 0
env: found lcd_contrast with value 15
FB: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
LCD: ready
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
=> bootp 120000 /C/Keywelt_V2.00_Januar_2x_SQUASHFS_2011.img
BOOTP broadcast 1
BOOTP broadcast 2
BOOTP broadcast 3
BOOTP broadcast 4
BOOTP broadcast 5
Retry count exceeded; starting again
und das kommt wenn ich es mit dem Hallenberg Assistenten versuche:
Netzwerkaktivitäten:
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
Und das steht in der Comportausgabe der dbox:
µdebug: DDF: Calibrating delay loop... debug: DDF: 67.79 BogoMIPS
debug: BMon V1.0 mID 01
debug: feID 7a gtxID 0b
debug: fpID 5a dsID http://Hallenberg.com
debug: HWrev X5 SWrev 0.81
debug: B/Ex/Fl(MB) 32/00/08
WATCHDOG reset enabled
debug: autoboot aborted from terminal
dbox2:root> boot net net net net net net net net net net
debug:
BOOTP/TFTP bootstrap loader (v0.3)
debug:
debug: Transmitting BOOTP request via broadcast
debug: Got BOOTP reply from Server IP 192.168.2.99, My IP 192.168.2.202
debug: Sending TFTP-request for file u-boot
will verify ELF image, start= 0x800000, size= 140064
verify sig: 262
boot net: boot file has no valid signature
Branching to 0x40000
U-Boot 1.3.4 (Tuxbox - Hallenberg.com) (Nov 29 2008 - 23:53:59)
CPU: PPC823ZTnnA at 67.200 MHz: 2 kB I-Cache 1 kB D-Cache
*** Warning: CPU Core has Silicon Bugs -- Check the Errata ***
Board: DBOX2, Nokia, BMon V1.0
Watchdog enabled
I2C: ready
DRAM: 32 MB
FLASH: 8 MB
FB: ready
LCD: ready
In: serial
Out: serial
Err: serial
Net: SCC ETHERNET
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'logo-lcd'.
Load address: 0x100000
Loading: ##
done
Bytes transferred = 7680 (1e00 hex)
BOOTP broadcast 1
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'u-boot'.
Load address: 0x100000
Loading: Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'logo-fb'.
Load address: 0x100000
Loading: ####################################
done
Bytes transferred = 179877 (2bea5 hex)
Options:
1: Console on null
2: Console on ttyS0
3: Console on framebuffer
Select option (1-3), other keys to stop autoboot: 0
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'kernel-cdk'.
Load address: 0x100000
Loading: ################################################## ###############
################################################## ########
done
Bytes transferred = 627048 (99168 hex)
Using SCC ETHERNET device
TFTP from server 192.168.2.99; our IP address is 192.168.2.202
Filename 'u-initrd'.
Load address: 0x400000
Loading: ################################################## ###############
##################################################
done
Bytes transferred = 586812 (8f43c hex)
.................................................. ............. done
Un-Protected 63 sectors
## Booting image at 00100000 ...
Image Name: dbox2
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 626984 Bytes = 612.3 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at 00400000 ...
Image Name: Ramdisk Image
Image Type: PowerPC Linux RAMDisk Image (gzip compressed)
Data Size: 586748 Bytes = 573 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Loading Ramdisk to 01f1f000, end 01fae3fc ... OK
Linux version 2.4.36.9-dbox2 (Hallenberg.com) (gcc version 3.4.6) #1 Sa 29. Nov 23:29:22 CET 2008
On node 0 totalpages: 8192
zone(0): 8192 pages.
zone(1): 0 pages.
zone(2): 0 pages.
Kernel command line: console=ttyS0 root=/dev/ram rw ip=192.168.2.202:192.168.2.99:::::off
Decrementer Frequency = 252000000/60
m8xx_wdt: active wdt found (SWTC: 0xFFFF, SWP: 0x1)
m8xx_wdt: keep-alive trigger installed (PITC: 0x12C0)
Console: colour dummy device 80x25
Calibrating delay loop... 66.96 BogoMIPS
Memory: 30348k available (1048k kernel code, 324k data, 72k init, 0k highmem)
Dentry cache hash table entries: 4096 (order: 3, 32768 bytes)
Inode cache hash table entries: 2048 (order: 2, 16384 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer cache hash table entries: 1024 (order: 0, 4096 bytes)
Page-cache hash table entries: 8192 (order: 3, 32768 bytes)
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)
devfs: boot_options: 0x1
i2c-core.o: i2c core module version 2.6.1 (20010830)
i2c-dev.o: i2c /dev entries driver module version 2.6.1 (20010830)
CPM UART driver version 0.04
ttyS0 at 0x0280 is on SMC1 using BRGÿttyS1 at 0x0380 is on SMC2 using BRG2
pty: 256 Unix98 ptys configured
half-duplex mode enabled
eth0: CPM ENET Version 0.2.dbox2 on SCC2, 00:50:9c:1f:50:1d
RAMDISK driver initialized: 16 RAM disks of 3333K size 1024 blocksize
D-Box 2 flash driver (size->0x800000 mem->0x10000000)
D-Box 2 flash memory: Found 2 x16 devices at 0x0 in 32-bit bank
Intel/Sharp Extended Query Table at 0x0035
cfi_cmdset_0001: Erase suspend on write enabled
Creating 6 MTD partitions on "D-Box 2 flash memory":
0x00000000-0x00020000 : "BR bootloader"
0x00020000-0x00040000 : "FLFS (U-Boot)"
0x00040000-0x006a0000 : "root (rootfs)"
0x006a0000-0x00800000 : "var (jffs2)"
0x00020000-0x00800000 : "Flash without bootloader"
0x00000000-0x00800000 : "Complete Flash"
Linux video capture interface: v1.00
mice: PS/2 mouse device common for all mice
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
IP: routing cache hash table of 512 buckets, 4Kbytes
TCP: Hash tables configured (established 2048 bind 4096)
IP-Config: Guessing netmask 255.255.255.0
IP-Config: Complete:
device=eth0, addr=192.168.2.202, mask=255.255.255.0, gw=255.255.255.255,
host=192.168.2.202, domain=, nis-domain=(none),
bootserver=192.168.2.99, rootserver=192.168.2.99, rootpath=
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
crc error<6>Freeing initrd memory: 572k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Freeing unused kernel memory: 72k init
-------------------------------------------------------------
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-boot
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-lcd
TFTP: Transfer erfolgreich beendet
BootP: Request von 00509C1F501D erhalten
BootP: ARP-Eintrag mit IP: 192.168.2.202 und Mac: 00509C1F501D gesetzt
BootP: Antwort an 00509C1F501D gesendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\logo-fb
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\kernel-cdk
TFTP: Transfer erfolgreich beendet
TFTP: Sende C:\Program Files\DBOX_IFA\tftp\u-initrd
TFTP: Transfer erfolgreich beendet
BootP: Request von 001B77B818F6 erhalten
BootP: Request von 001B77B818F6 erhalten
BootP: Request von 7C6D621A7CE4 erhalten
------ Zusatzinformationen ------
Gewählter Netzwerkadapter: Realtek PCIe FE Family Controller (0)
IP-Adresse des Netzwerkadapters: 192.168.2.99
IP-Adresse die die dbox bekommt: 192.168.2.202
Betriebssystem: Professional (Build 7600)
CPU 1: Intel(R) Core(TM)2 Duo CPU T5250 @ 1.50GHz @ 1496 MHz
Dateiname des Images: Keywelt_V2.00_Januar_2x_SQUASHFS_2011.img
Imagetyp: Zwei Flashs
DBOX-IFA Version: 3.4
------ Powered by http://www.dboxservice-hallenberg.de ------
Hab schon Stundenlang gegoogelt aber da steht nur das es ein Netzwerkfehler sein kann, was aber theoretisch nicht sein kann weil ich erstens alles aus hab (Firewall, Antivir) und zweitens es mit 4 anderen Boxen wunderbar funktioniert.
Vielleicht wisst Ihr ja wie ich die Box noch retten kann?!
Mfg
m4ddox