Fritzbox zur Kathi

[downunder24]

Hallo zusammen,

Ich möchte Homesharing mit der Fritz7270 und der UFS 910 machen.
Auf der Fritz hab ich oscam laufen und auf der Kathi Camd3902.

Ich hab jetzt mal den server eingerichtet und die Karte wird auch erkannt.(sie hängt an einem Smaro mit einer HD+ Karte)

Aber die kathi verbindet sich nicht.

Hier mal das log von Oscam:



-------------------------------------------------------------------------------
>> OSCam << cardserver started at Wed Jun 16 11:22:22 2010
-------------------------------------------------------------------------------
2010/06/16 11:22:22 2574 s version=0.99.4svn, build #2114, system=mips-tuxbox-linux, nice=-1
2010/06/16 11:22:22 2574 s max. clients=29, client max. idle=120 sec
2010/06/16 11:22:22 2574 s max. logsize=100 Kb
2010/06/16 11:22:22 2574 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2010/06/16 11:22:22 2574 s shared memory initialized (size=557986, fd=3)
2010/06/16 11:22:22 2574 s auth size=4756
2010/06/16 11:22:22 2574 s services reloaded: 0 services freed, 4 services loaded
2010/06/16 11:22:22 2574 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2010/06/16 11:22:22 2574 s signal handling initialized (type=sysv)
2010/06/16 11:22:23 2574 s 10897 service-id's loaded
2010/06/16 11:22:23 2574 s 22 lengths for caid guessing loaded
2010/06/16 11:22:23 2575 s monitor: initialized (fd=7, port=988)
2010/06/16 11:22:23 2575 s camd 3.3x: disabled
2010/06/16 11:22:23 2575 s camd 3.5x: initialized (fd=8, port=22117)
2010/06/16 11:22:23 2575 s cs378x: disabled
2010/06/16 11:22:23 2575 s newcamd: disabled
2010/06/16 11:22:23 2575 s cccam: disabled
2010/06/16 11:22:23 2575 s radegast: disabled
2010/06/16 11:22:23 2575 s logger started (pid=2576)
2010/06/16 11:22:23 2575 s resolver thread started
2010/06/16 11:22:23 2575 s http started (pid=2579)
2010/06/16 11:22:23 2575 s reader started (pid=2580, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2010/06/16 11:22:23 2575 s waiting for local card init
2010/06/16 11:22:23 2579 h HTTP Server listening on port 83
2010/06/16 11:22:26 2580 r02 card detected
2010/06/16 11:22:33 2580 r02 ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2010/06/16 11:22:35 2580 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/06/16 11:22:37 2580 r02 detect native NAGRA card T1 protocol
2010/06/16 11:22:38 2580 r02 -----------------------------------------
2010/06/16 11:22:38 2580 r02 |id |tier |valid from |valid to |
2010/06/16 11:22:38 2580 r02 +----+--------+------------+------------+
2010/06/16 11:22:38 2580 r02 |8011|0064 |2010/06/09 |2011/06/10 |
2010/06/16 11:22:39 2580 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2010/06/16 11:22:39 2580 r02 -----------------------------------------
2010/06/16 11:22:39 2580 r02 WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2010/06/16 11:22:39 2580 r02 ROM: D N A S P 1 4 2
2010/06/16 11:22:39 2580 r02 REV: R e v G C 4
2010/06/16 11:22:39 2580 r02 SER: 48 C2 8A 78
2010/06/16 11:22:39 2580 r02 CAID: 1830
2010/06/16 11:22:39 2580 r02 Prv.ID: 00 00 34 11 (sysid)
2010/06/16 11:22:39 2580 r02 Prv.ID: 00 00 00 00
2010/06/16 11:22:39 2580 r02 Prv.ID: 00 00 80 11
2010/06/16 11:22:39 2580 r02 [nagra-reader] ready for requests
2010/06/16 11:22:39 2575 s init for all local cards done
2010/06/16 11:22:39 2575 s anti cascading disabled
2010/06/16 11:22:39 2575 s dvbapi disabled



Meine oscam config:

#oscam.config generated automatically

[global]
logfile = /var/media/ftp/uStor01/emu/oscam/oscam.log
disablelog = 0
disableuserfile = 0
usrfileflag = 0
clienttimeout = 5000
fallbacktimeout = 2000
clientmaxidle = 120
cachedelay = 120
bindwait = 120
netprio = 0
clientdyndns = 0
resolvedelay = 30
unlockparental = 0
nice = -1
serialreadertimeout = 1500
maxlogsize = 100
waitforcards = 1
preferlocalcards = 1
saveinithistory = 1

[monitor]
port = 988
nocrypt = 192.168.0.0-192.168.255.255
aulow = 120
hideclient_to = 30
monlevel = 1
appendchaninfo = 1


[cs357x]
port = 22117
suppresscmd08 = 1

[webif]
httpport = 83
httpuser =
httppwd =
httpcss = /var/media/ftp/uStor01/emu/oscam//bluestyle.css
httptpl =
httpscript =
httprefresh = 10
httpallowed = 192.168.0.0-192.168.255.255
httpdyndns =
httphideidleclients = 1
httpreadonly = 0

[anticasc]
enabled = 0
numusers = 0
sampletime = 2
samples = 10
penalty = 0
aclogfile = ./oscam_ac.log
denysamples = 8
fakedelay = 1000






Oscam.user:

[account]
user = kathi
pwd = kathi
disabled = 0
expdate =
group = 1
hostname =
uniq = 0
sleep = 0
monlevel = 1
au = 1
services =
caid = 09C4&FFFF,1830&FFFF,1702&FFFF,1833&FFFF
betatunnel = 1833.FFFF:1702 # S02 Karte
ident =
numusers = 0
penalty = 0


Und auf der Kathi:

# Wenn Parameter gebraucht wird - '#' (Kommentarzeichen) entfernen und eure Werte reinsetzen!!!!!
#
#
#
# Boxtyp(optional): 1-dbox2, 2-dm7000, 3-dm7020, 4-dm500,
# 5-dm56xx/Triax, 7-elanvision, 9-server only, 10-relook, 11-dm600
# 12-ufs910, 13-dm800
# Default is 9 - server only
BOXTYPE=13
#
# UDP Port(optional); Defailt - 20248
#UDP_PORT=24110

# UDP Host(optional); Defailt - any
#UDP_HOST=192.168.0.1

# HTTP Port(optional); Defailt - 9080 ( 0: HTTP-server ausgeschaltet)
#HTTP_PORT=9080

# HOST Host(optional); Defailt - any
#HOST_HOST=192.168.0.1

# HTTP Login: Default - admin:camd3
#HTTP_ADMIN=admin
#HTTP_PASSWORD=camd3

# Log(optional): 0 - keine Ausgaben, 1-Datei, 2 - Console, 4 - UDP(syslog), 3 - Console+Datei, 5 - UDP+Datei, 6 - UDP+Console, 7-UDP+Console+Datei; Default ist 2;
#LOG=2

# descrambler delax in ms
#DESCR_DELAY=500

# Host f?r UDP-logging
#LOG_HOST=192.168.1.1

# Port f?r UDP-logging(optional); Default ist 514
#LOG_PORT=514

# DNS cache in sekunden; Default ist 60 sec
#DNS_CACHE=60


# Logfile
#LOG_FILE=/mnt/hdd/var/log/camd3.log

# AU f?r original Slot dbox2 (optional): 1-ein, 0-aus; Default ist 1
#DBOX2_AU=0

# Kartenslots (anzahl beliebig)
# je eine Zeile f?r Slot:
# SLOT=devicename:type:au_g:au_s:au_u:port:username: password(carddetect):deskey
#
# deskey f?r normale Slots ist optional, aber port,username und password m?ssen immer angegeben werden!!!
#
# f?r die Kartenleser(aber nicht multicam f?r dbox2) statt password, CTS oder CAR eingeben (carddetect - default - CAR)
#
# devicename: Pfad (volst?ndig) zum Device, oder Hostname von cardserver(newcamd) - /dev/ttyS0...9 f?r win32-version
# type: 1-serial, 2-intern(dreambox, elanvision, tripledragon), 4-cardserver(newcamd)
# au_g: 1-eingeschaltet, 0-ausgeschaltet
# au_s: 1-eingeschaltet, 0-ausgeschaltet
# au_u: 1-eingeschaltet, 0-ausgeschaltet
# port: port
# username: loginname
# password: loginpassword
# deskey: cardserver deskey (14 byte)
#SLOT=/dev/tts/0:1:1:1:1:997:com1:CAR
#SLOT=/dev/ttyS0:1:1:1:1:997:com1:CTS
#SLOT=/dev/sci0:2:1:1:1:999:slotunten:password3
#SLOT=/dev/sci1:2:1:1:1:998:slotoben:password2
#SLOT=192.168.178.1:4:1:1:1:22117:kathi:kathi:0102 030405060708091011121314
#SLOT=/dev/cardreader1:2:1:1:1:998:slotoben:password2



Camd3 servers:

cs357x://kathi:kathi1@192.168.0.100:22117


Könnt ihr mir bitte helfen damit es geht?

[Tomyslav]

Hat die FritzBox wirklich die IP 192.168.0.100?

[downunder24]

Nee 192.168.178.1

[Tomyslav]

Dann versuch es mal so:
cs357x://kathi:kathi1@192.168.178.1:22117

[downunder24]

Hab ich gemacht aber immer noch daselbe...


2000/01/01 1:01:21 2579 h HTTP Server listening on port 83
2010/06/16 12:12:04 2580 r02 card detected
2010/06/16 12:12:11 2580 r02 ATR: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
2010/06/16 12:12:13 2580 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2010/06/16 12:12:15 2580 r02 detect native NAGRA card T1 protocol
2010/06/16 12:12:16 2580 r02 -----------------------------------------
2010/06/16 12:12:16 2580 r02 |id |tier |valid from |valid to |
2010/06/16 12:12:16 2580 r02 +----+--------+------------+------------+
2010/06/16 12:12:16 2580 r02 |8011|0064 |2010/06/09 |2011/06/10 |
2010/06/16 12:12:17 2580 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2010/06/16 12:12:17 2580 r02 -----------------------------------------
2010/06/16 12:12:17 2580 r02 WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2010/06/16 12:12:17 2580 r02 ROM: D N A S P 1 4 2
2010/06/16 12:12:17 2580 r02 REV: R e v G C 4
2010/06/16 12:12:17 2580 r02 SER: 48 C2 8A 78
2010/06/16 12:12:17 2580 r02 CAID: 1830
2010/06/16 12:12:17 2580 r02 Prv.ID: 00 00 34 11 (sysid)
2010/06/16 12:12:17 2580 r02 Prv.ID: 00 00 00 00
2010/06/16 12:12:17 2580 r02 Prv.ID: 00 00 80 11
2010/06/16 12:12:17 2580 r02 [nagra-reader] ready for requests
2010/06/16 12:12:17 2575 s init for all local cards done
2010/06/16 12:12:17 2575 s anti cascading disabled
2010/06/16 12:12:17 2575 s dvbapi disabled


Und den port 22117 hab ich auch frei gegeben...

[Tomyslav]

Boote auch mal neu.
Was sagt der Log von camd3?

[downunder24]

Boote auch mal neu.
Was sagt der Log von camd3?

Hatte neu gebootet.
Wo finde ich den log von camd3?

[Tomyslav]

Starte camd3 über Telnet

[downunder24]

Ist das so richtig?

AAF-ufs910:~# var/bin/camd3.902
16.06.2010 10:28:41 camd3: camd3.config not found
16.06.2010 10:28:41 camd3: load config default
AAF-ufs910:~# 16.06.2010 10:28:42 camd3: BOXTYPE: ufs910
16.06.2010 10:28:42 camd3: LOG: 2
16.06.2010 10:28:42 camd3: UDP_PORT: 20248
16.06.2010 10:28:42 camd3: HTTP_PORT: 9080
16.06.2010 10:28:42 camd3: DNS_CACHE: 60 sec
16.06.2010 10:28:42 camd3: DESCR_DELAY: 0 ms
16.06.2010 10:28:42 camd3: camd3.map not found
16.06.2010 10:28:42 camd3: camd3.ignore not found
16.06.2010 10:28:42 camd3: camd3.servers not found
16.06.2010 10:28:42 camd3: camd3.users not found
16.06.2010 10:28:42 camd3: camd3.keys not found
16.06.2010 10:28:42 camd3: KeyDB: started
16.06.2010 10:28:42 camd3: HTTP: started on port 9080
16.06.2010 10:28:43 camd3: rom120.bin -> No such file or directory
16.06.2010 10:28:46 camd3: camd v3.902 - erfolgreich gestarte


die camd3.902 liegt in Var/bin und die keys sind var/keys.

[Tomyslav]

Die camd3.servers wird aber nicht gefunden:

16.06.2010 10:28:42 camd3: camd3.servers not found

[downunder24]

Die camd3.servers wird aber nicht gefunden:


Aber in dem keys ordner sind Camd3.servers und users.warum werden die nicht gefunden?

Rechte hab ich 775.

[Tomyslav]

Die Files sollten in /var/keys sein wenn ich mich nicht irre.
Du hast ja ein E2 Image oder?

[downunder24]

ja ist E2.Aber es gibt keinen ordner mit data.Ich denk das die ordnerstruktur anders ist wie bei der Dream

[downunder24]

Ok habs raus.Muss es anderst starten.

AAF-ufs910:~# 16.06.2010 11:29:06 camd3: BOXTYPE: dm800
16.06.2010 11:29:06 camd3: LOG: 2
16.06.2010 11:29:06 camd3: UDP_PORT: 22117
16.06.2010 11:29:06 camd3: HTTP_PORT: 9080
16.06.2010 11:29:06 camd3: DNS_CACHE: 60 sec
16.06.2010 11:29:06 camd3: DESCR_DELAY: 0 ms
16.06.2010 11:29:06 camd3: camd3.map not found
16.06.2010 11:29:06 camd3: camd3.ignore not found
16.06.2010 11:29:06 camd3: /dev/dvb/adapter0/ca1 Device or resource busy
16.06.2010 11:29:06 camd3: camd3.servers: HOST=192.168.178.1 PORT=22117
16.06.2010 11:29:06 camd3: UserDB(server): USER=kathi PASS=kathi SERVICES=all
16.06.2010 11:29:06 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all
16.06.2010 11:29:06 camd3: /var/keys/pw_start.services not found
16.06.2010 11:29:06 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=all
16.06.2010 11:29:06 camd3: /var/keys/pw_start.services not found
16.06.2010 11:29:06 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=all
16.06.2010 11:29:06 camd3: camd3.keys not found
16.06.2010 11:29:06 camd3: KeyDB: started
16.06.2010 11:29:06 camd3: HTTP: Address already in use
16.06.2010 11:29:06 camd3: rom120.bin -> No such file or directory
16.06.2010 11:29:08 camd3: slot 192.168.178.1:22117 -> init...
16.06.2010 11:29:08 camd3: slot 192.168.178.1:22117 monitor start...
16.06.2010 11:29:08 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:29:08 camd3: Slot /dev/cardreader1: (carddetect=password2) initialisiere...
16.06.2010 11:29:08 camd3: Slot /dev/cardreader1: Warnung: IO-Fehler!
16.06.2010 11:29:09 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:29:10 camd3: slot 192.168.178.1:22117 -> Opera


Das kommt.Aber geht immer noch nichts...

[Tomyslav]

Beende mal mit killall -9 camd3 die camd3 und starte neu ob der IO Fehler dann weg ist

[downunder24]

Ist immer noch:


16.06.2010 11:52:59 camd3: DNS_CACHE: 60 sec
16.06.2010 11:52:59 camd3: DESCR_DELAY: 0 ms
16.06.2010 11:52:59 camd3: camd3.map not found
16.06.2010 11:52:59 camd3: camd3.ignore not found
16.06.2010 11:52:59 camd3: camd3.servers: HOST=192.168.178.001 PORT=22117
16.06.2010 11:52:59 camd3: UserDB(server): USER=kathi PASS=kathi SERVICES=all
16.06.2010 11:52:59 camd3: UserDB(add): USER=benutzer1 PASS=password2 FROM=any SERVICES=all
16.06.2010 11:52:59 camd3: /var/keys/pw_start.services not found
16.06.2010 11:52:59 camd3: UserDB(add): USER=benutzer110 PASS=password10 FROM=any SERVICES=all
16.06.2010 11:52:59 camd3: /var/keys/pw_start.services not found
16.06.2010 11:52:59 camd3: UserDB(update): USER=benutzer110 PASS=password10 FROM=any SERVICES=all
16.06.2010 11:52:59 camd3: camd3.keys not found
16.06.2010 11:52:59 camd3: KeyDB: started
16.06.2010 11:52:59 camd3: HTTP: started on port 9080
16.06.2010 11:52:59 camd3: rom120.bin -> No such file or directory
16.06.2010 11:53:01 camd3: slot 192.168.178.1:22117 -> init...
16.06.2010 11:53:01 camd3: slot 192.168.178.1:22117 monitor start...
16.06.2010 11:53:01 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:01 camd3: Slot /dev/cardreader1: (carddetect=password2) initialisiere...
16.06.2010 11:53:01 camd3: Slot /dev/cardreader1: Warnung: IO-Fehler!
16.06.2010 11:53:02 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:03 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:03 camd3: camd v3.902 - erfolgreich gestartet
16.06.2010 11:53:04 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:05 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:06 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:07 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:08 camd3: slot 192.168.178.1:22117 -> Operation now in progress
16.06.2010 11:53:09 camd3: slot 192.168.178.1:22117 -> Operation now in progress



soll ich mal den smargo verstellen?

[Tomyslav]

Poste jetzt mal den Log von Oscam

[downunder24]

Datum ist halt bei 2000 weil ich die fritz neu gestartet habe.



-------------------------------------------------------------------------------
>> OSCam << cardserver started at Sat Jan 1 01:01:17 2000
-------------------------------------------------------------------------------
2000/01/01 1:01:17 2517 s version=0.99.4svn, build #2114, system=mips-tuxbox-linux, nice=-1
2000/01/01 1:01:17 2517 s max. clients=29, client max. idle=120 sec
2000/01/01 1:01:17 2517 s max. logsize=100 Kb
2000/01/01 1:01:17 2517 s client timeout=5000 ms, fallback timeout=2000 ms, cache delay=120 ms
2000/01/01 1:01:17 2517 s shared memory initialized (size=557986, fd=3)
2000/01/01 1:01:17 2517 s auth size=4756
2000/01/01 1:01:17 2517 s services reloaded: 0 services freed, 4 services loaded
2000/01/01 1:01:17 2517 s userdb reloaded: 0 accounts freed, 1 accounts loaded, 0 expired, 0 disabled
2000/01/01 1:01:17 2517 s signal handling initialized (type=sysv)
2000/01/01 1:01:18 2517 s 10897 service-id's loaded
2000/01/01 1:01:18 2517 s 22 lengths for caid guessing loaded
2000/01/01 1:01:18 2518 s monitor: initialized (fd=7, port=988)
2000/01/01 1:01:18 2518 s camd 3.3x: disabled
2000/01/01 1:01:18 2518 s camd 3.5x: initialized (fd=8, port=22117)
2000/01/01 1:01:18 2518 s cs378x: disabled
2000/01/01 1:01:18 2518 s newcamd: disabled
2000/01/01 1:01:18 2518 s cccam: disabled
2000/01/01 1:01:18 2518 s radegast: disabled
2000/01/01 1:01:18 2518 s logger started (pid=2519)
2000/01/01 1:01:18 2518 s resolver thread started
2000/01/01 1:01:18 2518 s http started (pid=2522)
2000/01/01 1:01:18 2518 s reader started (pid=2523, device=/dev/ttyUSB0, detect=cd, mhz=357, cardmhz=357)
2000/01/01 1:01:18 2518 s waiting for local card init
2000/01/01 1:01:18 2522 h HTTP Server listening on port 83
2000/01/01 1:01:21 2523 r02 card detected
2000/01/01 1:01:28 2523 r02 ATR:
2000/01/01 1:01:29 2523 r02 Maximum frequency for this card is formally 5 Mhz, clocking it to 3.57 Mhz
2000/01/01 1:01:31 2523 r02 detect native NAGRA card T1 protocol
2000/01/01 1:01:33 2523 r02 -----------------------------------------
2000/01/01 1:01:33 2523 r02 |id |tier |valid from |valid to |
2000/01/01 1:01:33 2523 r02 +----+--------+------------+------------+
2000/01/01 1:01:33 2523 r02 |8011|0064 |2010/06/09 |2011/06/10 |
2000/01/01 1:01:33 2523 r02 |8011|0065 |1992/01/01 |1993/01/01 |
2000/01/01 1:01:33 2523 r02 -----------------------------------------
2000/01/01 1:01:34 2523 r02 WARNING: For NAGRA2 cards you will have to set 'cardmhz = 368' in oscam.server
2000/01/01 1:01:34 2523 r02 ROM: D N A S P 1 4 2
2000/01/01 1:01:34 2523 r02 REV: R e v G C 4
2000/01/01 1:01:34 2523 r02 SER: 48 C2 8A 78
2000/01/01 1:01:34 2523 r02 CAID: 1830
2000/01/01 1:01:34 2523 r02 Prv.ID: 00 00 34 11 (sysid)
2000/01/01 1:01:34 2523 r02 Prv.ID: 00 00 00 00
2000/01/01 1:01:34 2523 r02 Prv.ID: 00 00 80 11
2000/01/01 1:01:34 2523 r02 [nagra-reader] ready for requests
2000/01/01 1:01:34 2518 s init for all local cards done
2000/01/01 1:01:34 2518 s anti cascading disabled
2000/01/01 1:01:34 2518 s dvbapi disabled


Sieht immer gleich aus.Passiert auch nichts wenn ich camd3 anmache...

[downunder24]

kann mir niemand helfen?

[Tomyslav]

Versuch es doch mal mit der MGcamd und verbinde dich mit der CWS Linie über newcamd Protokoll. Beispiele findest Du genug im Board.

[eysch]

vergleiche mal dein account und pass. "kathi kathi" mit deiner camd3.servers kathi kathi1