delux3
11.04.10, 18:51
Guten Tag,
Benutze MPCS +CCcam 2.1.4
bin mit meiner DBOX2 am verzweifeln... habe alles eingerichtet und mich auch schon durch etliche Seiten gelesen, komme aber nicht wirklch weiter.
Hab ne DBOX2 Nokia mit eingelötetem Multicam. (Sat)
guck ich mir den mpcs monitor an kommt:
2010/04/11 17:58:01 [ r 0002 ] Open /dev/tts/1
2010/04/11 17:58:01 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:07 [ c 0001 ] encrypted newcamd:15005-client 127.0.0.1 granted (glj, au=0, CCcam)
2010/04/11 17:58:07 [ c 0002 ] encrypted newcamd:15005-client 127.0.0.1 granted (glj, au=0, CCcam)
2010/04/11 17:58:07 [ c 0002 ] Connection closed to client
2010/04/11 17:58:07 [ c 0002 ] newcamd: glj disconnected from 127.0.0.1
2010/04/11 17:58:28 [ m 0002 ] encrypted monitor-client 127.0.0.1 granted (glj, lvl=4, pid=1289)
2010/04/11 17:58:39 [ r 0002 ] card detected
2010/04/11 17:58:42 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:45 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:47 [ r 0002 ] Error activating card: 246
2010/04/11 17:58:49 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:52 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:54 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:57 [ r 0002 ] Error activating card: 246
2010/04/11 17:58:58 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:01 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:03 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:06 [ r 0002 ] Error activating card: 246
2010/04/11 17:59:07 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:10 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:12 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:15 [ r 0002 ] Error activating card: 246
2010/04/11 17:59:16 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:19 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:21 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:24 [ r 0002 ] Error activating card: 246
2010/04/11 17:59:25 [ r 0002 ] card initializing error
meine cfg's sind folgende:
mpcs.conf
ode:
[global]
Nice = -15
ClientTimeout = 5
ClientMaxIdle = 60
CacheDelay = 0
FallbackTimeout = 2
BindWait = 60
ResolveDelay = 30
DyndnsInterval = 120
LogFile = /var/log/mpcs.log
MaxLogSize = 1024
Sleep = 0
showecmdw = 0
showemmdw = 0
disablecache1 = 0
disablecache2 = 0
disablecache = 0
Filter = 0
[monitor]
Port = 988
NoCrypt = 127.0.0.1
NoCrypt = 10.0.0.0-10.255.255.255
NoCrypt = 172.16.0.0-172.31.255.255
NoCrypt = 192.168.0.0-192.168.255.255
AULow = 120
MonLevel = 4
#Port 15005 & 15000 für die newcamd Clients
[newcamd]
Key = 0102030405060708091011121314
Port = 15005@1702:000000;15000@1833:000000
# Für Sat reicht bei mir ein Port, da mpcs die PW HD Caids (1833) automatisch auf 1702 mappt.
#für andere Karten CAIDs bzw. PW über Kabel, braucht ihr dann eventuell mehr Ports.
#Port 15003 für camd3 Clients
#[cs357x]
#Port = 15003
mpcs.reader
[reader]
blockua = 0
blockga = 0
blocksa = 0
AU = 1
Enable = 1
Label = multicam
Protocol = mouse
Device = /dev/tts/1
# Protocol internal und /dev/sci0 enstpricht in meinen Fall dem internen Card Slot der Dream
# Für andere Slots oder externe Kartenleser stehen die Parameter im mpcs wiki
PTS = 1
EMMCache = 1,3,2
Detect = CD
Group = 1
Fallback = 0
CAID = 1702,1833
# Hier werden für PW CAID 1702 und 1833 (für HD) eingelesen
mpcs.user
[account]
User = glj
Pwd = ncs
Uniq = 1
Group = 1
CAID = 1702,1833
MonLevel = 4
[account]
User = User1
Pwd = Pass1
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
[account]
User = hd1
Pwd = hd1
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
[account]
User = andreas
Pwd = andreas
Uniq = 1
Group = 1
MonLevel = 4
[account]
User = mike
Pwd = mike
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
mpcs.services
[sci-fi]
caid=1702, 1833
srvid=1C87
[zero]
caid=0100
srvid=0000
cccam.cfg
N: 127.0.0.1 15005 glj ncs 01 02 03 04 05 06 07 08 09 10 11 12 13 14
hab ne freigeschaltete s02, möchte erstmal einfach nur meinen 2ten kartenslot nutzen und darüber sky hell bekommen!
Danke schonmal im Vorraus
delux3
Benutze MPCS +CCcam 2.1.4
bin mit meiner DBOX2 am verzweifeln... habe alles eingerichtet und mich auch schon durch etliche Seiten gelesen, komme aber nicht wirklch weiter.
Hab ne DBOX2 Nokia mit eingelötetem Multicam. (Sat)
guck ich mir den mpcs monitor an kommt:
2010/04/11 17:58:01 [ r 0002 ] Open /dev/tts/1
2010/04/11 17:58:01 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:07 [ c 0001 ] encrypted newcamd:15005-client 127.0.0.1 granted (glj, au=0, CCcam)
2010/04/11 17:58:07 [ c 0002 ] encrypted newcamd:15005-client 127.0.0.1 granted (glj, au=0, CCcam)
2010/04/11 17:58:07 [ c 0002 ] Connection closed to client
2010/04/11 17:58:07 [ c 0002 ] newcamd: glj disconnected from 127.0.0.1
2010/04/11 17:58:28 [ m 0002 ] encrypted monitor-client 127.0.0.1 granted (glj, lvl=4, pid=1289)
2010/04/11 17:58:39 [ r 0002 ] card detected
2010/04/11 17:58:42 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:45 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:47 [ r 0002 ] Error activating card: 246
2010/04/11 17:58:49 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:52 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:54 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:58:57 [ r 0002 ] Error activating card: 246
2010/04/11 17:58:58 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:01 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:03 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:06 [ r 0002 ] Error activating card: 246
2010/04/11 17:59:07 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:10 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:12 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:15 [ r 0002 ] Error activating card: 246
2010/04/11 17:59:16 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Even parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:19 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; Odd parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:21 [ r 0002 ] Device: /dev/tts/1, 9600 bps; 8 bits/byte; None parity; 2 stopbits; dtr=1; rts=0
2010/04/11 17:59:24 [ r 0002 ] Error activating card: 246
2010/04/11 17:59:25 [ r 0002 ] card initializing error
meine cfg's sind folgende:
mpcs.conf
ode:
[global]
Nice = -15
ClientTimeout = 5
ClientMaxIdle = 60
CacheDelay = 0
FallbackTimeout = 2
BindWait = 60
ResolveDelay = 30
DyndnsInterval = 120
LogFile = /var/log/mpcs.log
MaxLogSize = 1024
Sleep = 0
showecmdw = 0
showemmdw = 0
disablecache1 = 0
disablecache2 = 0
disablecache = 0
Filter = 0
[monitor]
Port = 988
NoCrypt = 127.0.0.1
NoCrypt = 10.0.0.0-10.255.255.255
NoCrypt = 172.16.0.0-172.31.255.255
NoCrypt = 192.168.0.0-192.168.255.255
AULow = 120
MonLevel = 4
#Port 15005 & 15000 für die newcamd Clients
[newcamd]
Key = 0102030405060708091011121314
Port = 15005@1702:000000;15000@1833:000000
# Für Sat reicht bei mir ein Port, da mpcs die PW HD Caids (1833) automatisch auf 1702 mappt.
#für andere Karten CAIDs bzw. PW über Kabel, braucht ihr dann eventuell mehr Ports.
#Port 15003 für camd3 Clients
#[cs357x]
#Port = 15003
mpcs.reader
[reader]
blockua = 0
blockga = 0
blocksa = 0
AU = 1
Enable = 1
Label = multicam
Protocol = mouse
Device = /dev/tts/1
# Protocol internal und /dev/sci0 enstpricht in meinen Fall dem internen Card Slot der Dream
# Für andere Slots oder externe Kartenleser stehen die Parameter im mpcs wiki
PTS = 1
EMMCache = 1,3,2
Detect = CD
Group = 1
Fallback = 0
CAID = 1702,1833
# Hier werden für PW CAID 1702 und 1833 (für HD) eingelesen
mpcs.user
[account]
User = glj
Pwd = ncs
Uniq = 1
Group = 1
CAID = 1702,1833
MonLevel = 4
[account]
User = User1
Pwd = Pass1
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
[account]
User = hd1
Pwd = hd1
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
[account]
User = andreas
Pwd = andreas
Uniq = 1
Group = 1
MonLevel = 4
[account]
User = mike
Pwd = mike
Uniq = 1
Group = 1
AU = multicam
MonLevel = 4
mpcs.services
[sci-fi]
caid=1702, 1833
srvid=1C87
[zero]
caid=0100
srvid=0000
cccam.cfg
N: 127.0.0.1 15005 glj ncs 01 02 03 04 05 06 07 08 09 10 11 12 13 14
hab ne freigeschaltete s02, möchte erstmal einfach nur meinen 2ten kartenslot nutzen und darüber sky hell bekommen!
Danke schonmal im Vorraus
delux3