Juge
04.03.10, 22:36
Ich habe eine Conax Karte und habe mir Smargo zugelegt. Jetzt habe ich schon etliche Tage mit Smargo gekämpft. Mit CCcam und newcs. Auf meiner eigentliche Maschine (wo Technotrend DVB-S karte drin steckt) hat CCcam nicht mitgemacht - weiss nicht warum aber auf meiner Desktop geht beide CCCam und Newcs und in Entitlements auf Webpage sieht es auch vielversprechend aus.
Jetzt habe ich aber Probleme den finalen Schliff zu erledigen. Ich habe z.B hier die Anleitungen gefolgt und mir sasc-ng installiert. Es funktioniert soweit daß es beim Service start den Server kontaktiert aber danach nichts mehr.
Es wird eine neue Adapter gemacht komischerweise mit doppelte frontends demuxs usw. (z.B frontend0 und frontend1). Irgendwie ist sasc mit frontend1 gebunden aber z.B mythtv oder so will mit frontend0 diskutieren.
Ich weiß jetzt nicht wo es daneben läuft. Ich bin mir auch unsicher über verschiedene Diskussionen von Smargo und Firmware. Soweit ich sehen kann und verstehe funktioniert bei mir alles alles, beide CCcam und Newcs können was von Conax Karte lesen aber danach klappt's nicht mehr mit sasc-ng, und ich kriege keine logische Fehlermeldung. Anbei paar logs von sasc. Erst mit lokaler newcs und danach mit CCcam auf zweiter Maschine...
Hier z.B mein Log von sasc-ng mit
# cat /tmp/sasc.log
Mar 2 20:38:10.605 : Version: 0.0.2-a851247855bc+
Mar 2 20:38:10.605 CAM: initializing plugin: SoftCam (1.0.0pre-HG-a851247855bc+): A software emulated CAM
Mar 2 20:38:10.606 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ initializing (VDR 1.5.5)
Mar 2 20:38:10.606 CAM: starting plugin:
Mar 2 20:38:10.606 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ starting (VDR 1.5.5)
Mar 2 20:38:10.606 CAM(core.load): ** Plugin config:
Mar 2 20:38:10.606 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Mar 2 20:38:10.606 CAM(core.load): ** Local systems DON'T take priority over cached remote
Mar 2 20:38:10.606 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Mar 2 20:38:10.606 CAM(core.load): ** Force transfermode with digital audio
Mar 2 20:38:10.606 CAM(core.load): ** ECM cache is set to enabled
Mar 2 20:38:10.606 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Mar 2 20:38:10.606 CAM(general.info): loading cardclient config from /etc/camfiles/cardclient.conf
Mar 2 20:38:10.606 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=Cool
Mar 2 20:38:10.606 CAM(cardclient.core): hostname=127.0.0.1 port=15050 emm=1 emmCaids 0b00/ffff
Mar 2 20:38:10.606 CAM(cardclient.core): Newcamd: username=user password=passu key=0102030405060708091011121314
Mar 2 20:38:10.606 CAM(cardclient.core): client 'Newcamd' ready
Mar 2 20:38:10.607 CAM(core.net): connecting to 127.0.0.1:15050/tcp (127.0.0.1)
Mar 2 20:38:10.611 CAM(cardclient.login): Newcamd: CaID=0b00 admin=1 srvUA=00000000449B00D0 provider 000000/0000000000224D80
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/SoftCam.Key: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/smartcard.conf: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/cardslot.conf: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/override.conf: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): no keys loaded for softcam!
Mar 2 20:38:10.611 CAM(core.load): ** registered systems:
Mar 2 20:38:10.611 CAM(core.load): ** Cardclient (pri -15)
Mar 2 20:38:10.611 CAM(core.load): ** Conax (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** ConstCW (pri -20)
Mar 2 20:38:10.611 CAM(core.load): ** Cryptoworks (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Irdeto (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Irdeto2 (pri -Cool
Mar 2 20:38:10.611 CAM(core.load): ** Nagra (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Nagra2 (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Fake-NDS (pri -12)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Conax (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Cryptoworks (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Irdeto (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Nagra (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Seca (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Viaccess (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-VideoGuard2 (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** Seca (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** @SHL (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Viaccess (pri -10)
Mar 2 20:38:11.613 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 2 20:38:11.618 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 2 20:38:11.619 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Mar 2 20:38:11.619 : Listening on port 5456
After awhile I get:
Mar 2 20:40:11.610 CAM(core.net): idle timeout, disconnected 127.0.0.1:15050
$ cat /tmp/sasc.log
Mar 4 19:23:22.812 : Version: 0.0.2-a851247855bc+
Mar 4 19:23:22.816 CAM: initializing plugin: SoftCam (1.0.0pre-HG-a851247855bc+): A software emulated CAM
Mar 4 19:23:22.830 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ initializing (VDR 1.5.5)
Mar 4 19:23:22.831 CAM: starting plugin:
Mar 4 19:23:22.831 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ starting (VDR 1.5.5)
Mar 4 19:23:22.832 CAM(core.load): ** Plugin config:
Mar 4 19:23:22.832 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Mar 4 19:23:22.833 CAM(core.load): ** Local systems DON'T take priority over cached remote
Mar 4 19:23:22.834 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Mar 4 19:23:22.834 CAM(core.load): ** Force transfermode with digital audio
Mar 4 19:23:22.835 CAM(core.load): ** ECM cache is set to enabled
Mar 4 19:23:22.835 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Mar 4 19:23:22.849 CAM(general.info): loading cardclient config from /etc/camfiles//cardclient.conf
Mar 4 19:23:22.854 CAM(cardclient.cccam2): logout from server initiated
Mar 4 19:23:22.855 CAM(cardclient.cccam2extra): reader thread stopped
Mar 4 19:23:22.856 CAM(cardclient.cccam2extra): network shut down
Mar 4 19:23:22.856 CAM(cardclient.cccam2extra): logout done
Mar 4 19:23:22.857 CAM(cardclient.core): hostname=192.168.178.21 port=12000 emm=1 emmCaids 0b00/ffff
Mar 4 19:23:22.858 CAM(cardclient.core): cccam2: username=user password=passwd
Mar 4 19:23:22.858 CAM(cardclient.core): our nodeid: 67 c6 69 73 51 ff 4a ec
Mar 4 19:23:22.859 CAM(cardclient.core): pretended CCcam version '2.0.11' build '2892'
Mar 4 19:23:22.859 CAM(cardclient.core): client 'cccam2' ready
Mar 4 19:23:22.860 CAM(cardclient.cccam2): logout from server initiated
Mar 4 19:23:22.861 CAM(cardclient.cccam2extra): reader thread stopped
Mar 4 19:23:22.861 CAM(cardclient.cccam2extra): network shut down
Mar 4 19:23:22.862 CAM(cardclient.cccam2extra): logout done
Mar 4 19:23:22.870 CAM(core.net): connecting to 192.168.178.21:12000/tcp (192.168.178.21)
Mar 4 19:23:22.875 CAM(cardclient.cccam2extra): welcome checksum correct
Mar 4 19:23:22.887 CAM(cardclient.login): CCcam login succeed
Mar 4 19:23:22.888 CAM(general.error): failed open /etc/camfiles//SoftCam.Key: No such file or directory
Mar 4 19:23:22.889 CAM(general.error): failed open /etc/camfiles//smartcard.conf: No such file or directory
Mar 4 19:23:22.890 CAM(general.error): failed open /etc/camfiles//cardslot.conf: No such file or directory
Mar 4 19:23:22.891 CAM(general.error): failed open /etc/camfiles//override.conf: No such file or directory
Mar 4 19:23:22.891 CAM(general.error): no keys loaded for softcam!
Mar 4 19:23:22.892 CAM(core.load): ** registered systems:
Mar 4 19:23:22.892 CAM(core.load): ** Cardclient (pri -15)
Mar 4 19:23:22.893 CAM(core.load): ** Conax (pri -10)
Mar 4 19:23:22.893 CAM(core.load): ** ConstCW (pri -20)
Mar 4 19:23:22.894 CAM(core.load): ** Cryptoworks (pri -10)
Mar 4 19:23:22.895 CAM(core.load): ** Irdeto (pri -10)
Mar 4 19:23:22.895 CAM(core.load): ** Irdeto2 (pri -8)
Mar 4 19:23:22.896 CAM(core.load): ** Nagra (pri -10)
Mar 4 19:23:22.896 CAM(core.load): ** Nagra2 (pri -10)
Mar 4 19:23:22.897 CAM(core.load): ** Fake-NDS (pri -12)
Mar 4 19:23:22.898 CAM(core.load): ** SC-Conax (pri -5)
Mar 4 19:23:22.898 CAM(core.load): ** SC-Cryptoworks (pri -5)
Mar 4 19:23:22.899 CAM(core.load): ** SC-Irdeto (pri -5)
Mar 4 19:23:22.899 CAM(core.load): ** SC-Nagra (pri -5)
Mar 4 19:23:22.900 CAM(core.load): ** SC-Seca (pri -5)
Mar 4 19:23:22.901 CAM(core.load): ** SC-Viaccess (pri -5)
Mar 4 19:23:22.901 CAM(core.load): ** SC-VideoGuard2 (pri -5)
Mar 4 19:23:22.902 CAM(core.load): ** Seca (pri -10)
Mar 4 19:23:22.902 CAM(core.load): ** @SHL (pri -10)
Mar 4 19:23:22.903 CAM(core.load): ** Viaccess (pri -10)
Mar 4 19:23:22.927 CAM(cardclient.login): cccam2: server version 2.1.0 build 2944 nodeid 92 a1 b0 96 62 4d e5 7a
Mar 4 19:23:22.964 CAM(cardclient.cccam2): got CMD 05 (payload length=0)
Mar 4 19:23:22.964 CAM(cardclient.cccam2shares): ADD share 00000064 hops 0 maxdown 8 caid 0b00 ua 00000000449b00d0 prov 000000/00224d80 (EMM)
Mar 4 19:23:22.965 CAM(cardclient.cccam2): enabled EMM processing
Mar 4 19:23:23.905 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 4 19:23:23.911 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 4 19:23:23.911 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Mar 4 19:23:23.919 : Listening on port 5456
Mar 4 19:25:23.107 CAM(cardclient.cccam2): server PONG
Jetzt habe ich aber Probleme den finalen Schliff zu erledigen. Ich habe z.B hier die Anleitungen gefolgt und mir sasc-ng installiert. Es funktioniert soweit daß es beim Service start den Server kontaktiert aber danach nichts mehr.
Es wird eine neue Adapter gemacht komischerweise mit doppelte frontends demuxs usw. (z.B frontend0 und frontend1). Irgendwie ist sasc mit frontend1 gebunden aber z.B mythtv oder so will mit frontend0 diskutieren.
Ich weiß jetzt nicht wo es daneben läuft. Ich bin mir auch unsicher über verschiedene Diskussionen von Smargo und Firmware. Soweit ich sehen kann und verstehe funktioniert bei mir alles alles, beide CCcam und Newcs können was von Conax Karte lesen aber danach klappt's nicht mehr mit sasc-ng, und ich kriege keine logische Fehlermeldung. Anbei paar logs von sasc. Erst mit lokaler newcs und danach mit CCcam auf zweiter Maschine...
Hier z.B mein Log von sasc-ng mit
# cat /tmp/sasc.log
Mar 2 20:38:10.605 : Version: 0.0.2-a851247855bc+
Mar 2 20:38:10.605 CAM: initializing plugin: SoftCam (1.0.0pre-HG-a851247855bc+): A software emulated CAM
Mar 2 20:38:10.606 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ initializing (VDR 1.5.5)
Mar 2 20:38:10.606 CAM: starting plugin:
Mar 2 20:38:10.606 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ starting (VDR 1.5.5)
Mar 2 20:38:10.606 CAM(core.load): ** Plugin config:
Mar 2 20:38:10.606 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Mar 2 20:38:10.606 CAM(core.load): ** Local systems DON'T take priority over cached remote
Mar 2 20:38:10.606 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Mar 2 20:38:10.606 CAM(core.load): ** Force transfermode with digital audio
Mar 2 20:38:10.606 CAM(core.load): ** ECM cache is set to enabled
Mar 2 20:38:10.606 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Mar 2 20:38:10.606 CAM(general.info): loading cardclient config from /etc/camfiles/cardclient.conf
Mar 2 20:38:10.606 CAM(cardclient.newcamd): now using protocol version 525 (cdLen=Cool
Mar 2 20:38:10.606 CAM(cardclient.core): hostname=127.0.0.1 port=15050 emm=1 emmCaids 0b00/ffff
Mar 2 20:38:10.606 CAM(cardclient.core): Newcamd: username=user password=passu key=0102030405060708091011121314
Mar 2 20:38:10.606 CAM(cardclient.core): client 'Newcamd' ready
Mar 2 20:38:10.607 CAM(core.net): connecting to 127.0.0.1:15050/tcp (127.0.0.1)
Mar 2 20:38:10.611 CAM(cardclient.login): Newcamd: CaID=0b00 admin=1 srvUA=00000000449B00D0 provider 000000/0000000000224D80
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/SoftCam.Key: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/smartcard.conf: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/cardslot.conf: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): failed open /etc/camfiles/override.conf: No such file or directory
Mar 2 20:38:10.611 CAM(general.error): no keys loaded for softcam!
Mar 2 20:38:10.611 CAM(core.load): ** registered systems:
Mar 2 20:38:10.611 CAM(core.load): ** Cardclient (pri -15)
Mar 2 20:38:10.611 CAM(core.load): ** Conax (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** ConstCW (pri -20)
Mar 2 20:38:10.611 CAM(core.load): ** Cryptoworks (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Irdeto (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Irdeto2 (pri -Cool
Mar 2 20:38:10.611 CAM(core.load): ** Nagra (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Nagra2 (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Fake-NDS (pri -12)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Conax (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Cryptoworks (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Irdeto (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Nagra (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Seca (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-Viaccess (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** SC-VideoGuard2 (pri -5)
Mar 2 20:38:10.611 CAM(core.load): ** Seca (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** @SHL (pri -10)
Mar 2 20:38:10.611 CAM(core.load): ** Viaccess (pri -10)
Mar 2 20:38:11.613 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 2 20:38:11.618 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 2 20:38:11.619 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Mar 2 20:38:11.619 : Listening on port 5456
After awhile I get:
Mar 2 20:40:11.610 CAM(core.net): idle timeout, disconnected 127.0.0.1:15050
$ cat /tmp/sasc.log
Mar 4 19:23:22.812 : Version: 0.0.2-a851247855bc+
Mar 4 19:23:22.816 CAM: initializing plugin: SoftCam (1.0.0pre-HG-a851247855bc+): A software emulated CAM
Mar 4 19:23:22.830 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ initializing (VDR 1.5.5)
Mar 4 19:23:22.831 CAM: starting plugin:
Mar 4 19:23:22.831 CAM(general.info): SC version 1.0.0pre-HG-a851247855bc+ starting (VDR 1.5.5)
Mar 4 19:23:22.832 CAM(core.load): ** Plugin config:
Mar 4 19:23:22.832 CAM(core.load): ** Key updates (AU) are enabled (active CAIDs) (no prestart)
Mar 4 19:23:22.833 CAM(core.load): ** Local systems DON'T take priority over cached remote
Mar 4 19:23:22.834 CAM(core.load): ** Concurrent FF recordings are NOT allowed
Mar 4 19:23:22.834 CAM(core.load): ** Force transfermode with digital audio
Mar 4 19:23:22.835 CAM(core.load): ** ECM cache is set to enabled
Mar 4 19:23:22.835 CAM(core.load): ** ScCaps are 1 2 0 0 0 0 0 0 0 0
Mar 4 19:23:22.849 CAM(general.info): loading cardclient config from /etc/camfiles//cardclient.conf
Mar 4 19:23:22.854 CAM(cardclient.cccam2): logout from server initiated
Mar 4 19:23:22.855 CAM(cardclient.cccam2extra): reader thread stopped
Mar 4 19:23:22.856 CAM(cardclient.cccam2extra): network shut down
Mar 4 19:23:22.856 CAM(cardclient.cccam2extra): logout done
Mar 4 19:23:22.857 CAM(cardclient.core): hostname=192.168.178.21 port=12000 emm=1 emmCaids 0b00/ffff
Mar 4 19:23:22.858 CAM(cardclient.core): cccam2: username=user password=passwd
Mar 4 19:23:22.858 CAM(cardclient.core): our nodeid: 67 c6 69 73 51 ff 4a ec
Mar 4 19:23:22.859 CAM(cardclient.core): pretended CCcam version '2.0.11' build '2892'
Mar 4 19:23:22.859 CAM(cardclient.core): client 'cccam2' ready
Mar 4 19:23:22.860 CAM(cardclient.cccam2): logout from server initiated
Mar 4 19:23:22.861 CAM(cardclient.cccam2extra): reader thread stopped
Mar 4 19:23:22.861 CAM(cardclient.cccam2extra): network shut down
Mar 4 19:23:22.862 CAM(cardclient.cccam2extra): logout done
Mar 4 19:23:22.870 CAM(core.net): connecting to 192.168.178.21:12000/tcp (192.168.178.21)
Mar 4 19:23:22.875 CAM(cardclient.cccam2extra): welcome checksum correct
Mar 4 19:23:22.887 CAM(cardclient.login): CCcam login succeed
Mar 4 19:23:22.888 CAM(general.error): failed open /etc/camfiles//SoftCam.Key: No such file or directory
Mar 4 19:23:22.889 CAM(general.error): failed open /etc/camfiles//smartcard.conf: No such file or directory
Mar 4 19:23:22.890 CAM(general.error): failed open /etc/camfiles//cardslot.conf: No such file or directory
Mar 4 19:23:22.891 CAM(general.error): failed open /etc/camfiles//override.conf: No such file or directory
Mar 4 19:23:22.891 CAM(general.error): no keys loaded for softcam!
Mar 4 19:23:22.892 CAM(core.load): ** registered systems:
Mar 4 19:23:22.892 CAM(core.load): ** Cardclient (pri -15)
Mar 4 19:23:22.893 CAM(core.load): ** Conax (pri -10)
Mar 4 19:23:22.893 CAM(core.load): ** ConstCW (pri -20)
Mar 4 19:23:22.894 CAM(core.load): ** Cryptoworks (pri -10)
Mar 4 19:23:22.895 CAM(core.load): ** Irdeto (pri -10)
Mar 4 19:23:22.895 CAM(core.load): ** Irdeto2 (pri -8)
Mar 4 19:23:22.896 CAM(core.load): ** Nagra (pri -10)
Mar 4 19:23:22.896 CAM(core.load): ** Nagra2 (pri -10)
Mar 4 19:23:22.897 CAM(core.load): ** Fake-NDS (pri -12)
Mar 4 19:23:22.898 CAM(core.load): ** SC-Conax (pri -5)
Mar 4 19:23:22.898 CAM(core.load): ** SC-Cryptoworks (pri -5)
Mar 4 19:23:22.899 CAM(core.load): ** SC-Irdeto (pri -5)
Mar 4 19:23:22.899 CAM(core.load): ** SC-Nagra (pri -5)
Mar 4 19:23:22.900 CAM(core.load): ** SC-Seca (pri -5)
Mar 4 19:23:22.901 CAM(core.load): ** SC-Viaccess (pri -5)
Mar 4 19:23:22.901 CAM(core.load): ** SC-VideoGuard2 (pri -5)
Mar 4 19:23:22.902 CAM(core.load): ** Seca (pri -10)
Mar 4 19:23:22.902 CAM(core.load): ** @SHL (pri -10)
Mar 4 19:23:22.903 CAM(core.load): ** Viaccess (pri -10)
Mar 4 19:23:22.927 CAM(cardclient.login): cccam2: server version 2.1.0 build 2944 nodeid 92 a1 b0 96 62 4d e5 7a
Mar 4 19:23:22.964 CAM(cardclient.cccam2): got CMD 05 (payload length=0)
Mar 4 19:23:22.964 CAM(cardclient.cccam2shares): ADD share 00000064 hops 0 maxdown 8 caid 0b00 ua 00000000449b00d0 prov 000000/00224d80 (EMM)
Mar 4 19:23:22.965 CAM(cardclient.cccam2): enabled EMM processing
Mar 4 19:23:23.905 frontend: Starting thread on /dev/dvb/adapter1/frontend1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 4 19:23:23.911 demux: Starting thread on /dev/dvb/adapter1/demux1
The thread scheduling parameters indicate:
policy = 0
priority = 0
Mar 4 19:23:23.911 dvr: Starting thread on /dev/dvb/adapter1/dvr1
The thread scheduling parameters indicate:
policy = 1
priority = 99
Mar 4 19:23:23.919 : Listening on port 5456
Mar 4 19:25:23.107 CAM(cardclient.cccam2): server PONG