gueler
22.03.09, 18:50
hi leute da ich meinen newcs server ungerne umbauen würde zu mpcs habe ich jetzt von e2 auf aaf 2.0 gewechselt.
so mit camd3.902 kann ich auf den newcs connecten geht alles außer hd
camd3.config
.....
SLOT=192.168.0.19:4:1:1:1:24110:user3:pass3:010203 0405060708091011121314
unter e2 kann ich mit incubus connecten, geht alles außer hd
incubuscamd.conf
......
[Prov:0501]
card_server_url_0=cccam://user3:pass3@192.168.0.19:13000
card_server_url_1=newcamd://user3:pass3@192.168.0.19:24110/0102030405060708091011121314
[Servers]
#card_server_url_0=cccam://user:pass@serverip:port
card_server_url_0=cccam://user3:pass3@192.168.0.19:13000
card_server_url_1=newcamd://user3:pass3@192.168.0.19:24110/0102030405060708091011121314
so nun hab ich mir die mgcamd 1.31 über da online update gezogen und es bleibt schwarz, aber ich weiß nicht wieso.
hier meine newcs.xml von meinem server
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>600</mhz>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>24110</newcamd_port>
<priority>round</priority>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10001</port>
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.202</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<httpd>
<server>
<port>3100</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>local</name>
<password>local</password>
<au>on</au>
</user>
<user>
<name>user1</name>
<password>pass1</password>
<au>on</au>
</user>
<user>
<name>user2</name>
<password>pass2</password>
<au>on</au>
</user>
<user>
<name>user3</name>
<password>pass3</password>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
nun zur kathi
die dateien mg_cfg und newcamd.list liegen in data/keys
hier die mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }
hier die newcamd list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.0.19 24110 user3 pass3 01 02 13 04 15 06 17 08 01 10 11 12 13 14 lan newcs
die replace hab ich erstmal weggelassen, es muss ja erstmal grundlegend mit der mgcamd laufen, kann mir einer sagen ob ich was vergessen habe oder wo der fehler liegt
so mit camd3.902 kann ich auf den newcs connecten geht alles außer hd
camd3.config
.....
SLOT=192.168.0.19:4:1:1:1:24110:user3:pass3:010203 0405060708091011121314
unter e2 kann ich mit incubus connecten, geht alles außer hd
incubuscamd.conf
......
[Prov:0501]
card_server_url_0=cccam://user3:pass3@192.168.0.19:13000
card_server_url_1=newcamd://user3:pass3@192.168.0.19:24110/0102030405060708091011121314
[Servers]
#card_server_url_0=cccam://user:pass@serverip:port
card_server_url_0=cccam://user3:pass3@192.168.0.19:13000
card_server_url_1=newcamd://user3:pass3@192.168.0.19:24110/0102030405060708091011121314
so nun hab ich mir die mgcamd 1.31 über da online update gezogen und es bleibt schwarz, aber ich weiß nicht wieso.
hier meine newcs.xml von meinem server
<newCSconfig>
<readers name="Card Readers">
<device>
<name>Multicam</name>
<type>dbox</type>
<node>/dev/tts/1</node>
<mhz>600</mhz>
<parity>even</parity>
<export>yes</export>
<enabled>yes</enabled>
<blocksa>No</blocksa>
<blockua>No</blockua>
<blockga>No</blockga>
<boxkey>0000000000</boxkey>
<PTShandshake>no</PTShandshake>
<crypto-special>no</crypto-special>
<carddetect>no</carddetect>
<newcamd_port>24110</newcamd_port>
<priority>round</priority>
<sid>
<allow>
<id></id>
</allow>
<deny>
<id></id>
</deny>
</sid>
</device>
</readers>
<radegastserver>
<enabled>no</enabled>
<port>10001</port>
<allow>
<hostname>127.0.0.1</hostname>
</allow>
</radegastserver>
<cache>
<emm>10</emm>
<ecm>10</ecm>
</cache>
<debug>
<level>normal</level>
<type>init</type>
<output>all</output>
<logfile></logfile>
<console_options></console_options>
<file_options></file_options>
<udp_host>192.168.1.202</udp_host>
<udp_port>1000</udp_port>
<udp_options></udp_options>
<tcp_port>3001</tcp_port>
<tcp_options></tcp_options>
</debug>
<httpd>
<server>
<port>3100</port>
<enabled>yes</enabled>
</server>
<user>
<name>newcs</name>
<password>newcs</password>
<accesslevel>admin</accesslevel>
</user>
</httpd>
<newcamdserver>
<enabled>yes</enabled>
<name>bla</name>
<deskey>01 02 03 04 05 06 07 08 09 10 11 12 13 14</deskey>
<userfile></userfile>
<user>
<name>local</name>
<password>local</password>
<au>on</au>
</user>
<user>
<name>user1</name>
<password>pass1</password>
<au>on</au>
</user>
<user>
<name>user2</name>
<password>pass2</password>
<au>on</au>
</user>
<user>
<name>user3</name>
<password>pass3</password>
<au>on</au>
</user>
</newcamdserver>
</newCSconfig>
nun zur kathi
die dateien mg_cfg und newcamd.list liegen in data/keys
hier die mg_cfg
# EMM messages
# 00 don't show any EMMs (default)
# 01 show only valid EMMs
# 02 show valid and bad EMMs with complete data display
M: { 01 }
# ECM messages
# 00 don't show anything about ecm
# 01 normal mode, show pids processed, decoded ecm and cw
# 02 verbose mode, show valid and bad ECMs with data
C: { 01 }
# AU
# 00 disable, no emm pids processed
# 01 enable, emm pids always processed for soft-au and shared cards
# 02 auto, emm started only if channel cant be decoded
# 03 process emm pids for network cards update only
A: { 02 }
# key update (sum 01 or 02 with 04)
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
# 04 enable TPS au
U: { 01 }
# config files folder (softcam, autoroll, ignore/priority)
# 00 files in /var/keys
# 01 files in /tmp
T: { 00 }
# network mode, use summ for several clients
# 00 no network (default)
# 01 newcamd netclient
# 02 radegast netclient
# 04 camd3 netclient
# 08 gbox netclient
G: { 01 }
# network retry, use summ for several options
# 00 disable
# 01 retry every new ecm
# 02 try to connect to offline shares every Q: seconds
# 04 try to detect and fast reconnect to lost (and not used atm) server
# + XX messages number and YY seconds to reconnect
# mg will reconnect to server, if no answer to last XX ecm/keepalive or
# if no answer for last ecm or keepalive sent for YY seconds
# set to 0 to disable
N: { 07 } 5 30
# network ecm timeout in seconds
K: { 05 }
# newcamd dead routes connect retry, sec
Q: { 600 }
# network shares priority
# 00 gbox, newcamd, radegast, camd3 (default)
# 01 camd3, radegast, newcamd, gbox
# 02 newcamd, camd3, gbox, radegast
P: { 00 }
# on screen display type
# 00 No OSD (default)
# 01 neutrino
# 02 enigma
# 03 relook
# + user password for http auth
O: { 00 } username password
# on screen display Options, summ of:
# 01 show emu ecm
# 02 show network shares messages
# 04 show decoding failed / fta
# 08 show emm keys update
# + web port to use for osd
S: { 03 } 80
# Log option, summ of:
# 00 off
# 01 network udp log
# 02 log to console
# 04 file, appended ! delete it by yourself, before it eat all your hdd
# + IP udp-port log-file-name
L: { 00 } 172.16.1.1 28007 /tmp/mgcamd.log
# keep ecm cache, seconds
# every cache entry takes 28 bytes, so 24h cache will take *only* 240-400kb of memory,
# for openbox/elanvision users with remote shares make sense to set it higher than default value,
# to not hammer cards while timeshifting or playing crypted recordings.
E: { 15 }
# cache option, summ of:
# 00 Off (default)
# 01 Ecm pids cache, store pids used to decode in /tmp/ca_cache.list at exit, load at startup, same syntax as restore.list
# 02 Ecm data cache, remember CW for (E:) time
# 04 Emm cache for network cards, do not resend the same emm twice, cache not cleared until restart
H: { 07 }
# reread files, summ of:
# 00 No (default)
# 01 reread config file on channel change (including priority and ignore, but not replace/cache)
# 02 reread SoftCam.Key on channel change
# 04 reread SoftCam.Key if file changed
R: { 00 }
# debug, summ of
# 00 off (default)
# 01 debug ecm
# 02 debug emm
# 04 debug network ecm
# 08 debug network emm
# 16 debug network login
# 32 show mem/cpu stats every 1 min
# 64 add timestamp to log messages
D: { 00 }
# box type
# 00 autodetect, change only if you think wrong type detected.
# 01 dbox2
# 02 dreambox
# 03 triple-dragon
# 04 relook
# 05 openbox
B: { 06 }
hier die newcamd list
CWS_KEEPALIVE = 300
CWS_INCOMING_PORT = 21000
CWS = 192.168.0.19 24110 user3 pass3 01 02 13 04 15 06 17 08 01 10 11 12 13 14 lan newcs
die replace hab ich erstmal weggelassen, es muss ja erstmal grundlegend mit der mgcamd laufen, kann mir einer sagen ob ich was vergessen habe oder wo der fehler liegt