PDA

Archiv verlassen und diese Seite im Standarddesign anzeigen : DM800 + GBox als Server



Stfi13
27.02.09, 15:17
Hi Dirk01

Hätte da mal ne frage zur Dm800 und sharen .
Ich habe auch eine mit dem nabilo system. Ist auch eigentlich recht gut
ABER


ICh bekomme den internen cardreader nicht angesprochen da ich ihn als server wollte.
KAnnst du mir mal ein paar tips geben ?? ICh wollte das gbox nehmen da es mir von der DBOX2 vertraut ist .

Mfg

Stefan

Tomyslav
27.02.09, 15:21
Dann laß mal deine gbox.cfg sehen und wir kucken mal nach
Da fällt mir auf, dass ist eigentlich der falsche Bereich dafür. Vielleicht kann uns jemand in den CS Bereich
verschieben wegen der Dream und gbox
edit:
Danke Dirk fürs verschieben. Das ging ja schnell!

dirk01
27.02.09, 16:05
@Stfi13

würde dir gerne helfen, jedoch hatte ich meine DM mit der GBox noch nie als Server, nur als Client.
CCcamd wird dir wohl auch nicht weiter helfen ?

"Tomyslav" ist da unser Spezi,
poste doch die Config und evtl. kann er dir helfen.

B.T.
27.02.09, 16:07
wenn ich zu Hause bin kann ich ja mal meine config posten. da läuft die Gbox und erkennt auch die Karte

dirk01
27.02.09, 16:30
@B.T.

mach das bitte, würde mich auch interessieren

B.T.
27.02.09, 18:03
Hier mit der config läuft die Gbox mit interner Karte:

#gbox config file

# Trace/Debug
# xx yz ; xx=00 no konsole output
# xx yz ; xx=01 konsole output
# xx yz ; y=0 debug output (don´t use)
# xx yz ; y=1 no debug output
# xx yz ; z=0 ouput to konsole
# xx yz ; z=1 output to /var/tmp/debug.txt
# xx yz ; z=2 Output to UDP (to capture with gboxt)
Z: { 01 12 } 192.168.2.18 8025

# 00 auto
# 01 80X86
# 02 MPC823
# 03 IBM STB04xxx
# 00 auto
# 01 ibm
# 02 api2
# 03 api3
# 00 cw write style = use internal routine (only dbox2)
# 01 cw write style = CA_SET_DESCR type1 (dbox2, vdr)
# 02 cw write style = CA_SET_DESCR type2
# 03 cw write style = CA_SET_DESCR type3
# 04 cw write style = 16 byte /proc/bus/gtx
# 05 cw write style = 4096 byte /proc/bus/gtx, cw offset=0x04D0
# xx write cw in 1st device with index=xx
# yy write cw in 2nd device with index=yy
# 01 means with .index=0 (default)
# 02 means with .index=1
# 03 means with .index=0 and .index=1
# .. any bitwise combination ...
# FF means with all 8 indexes (0-7)

# PPC files,folders,devices
# folder/device comment
#F: { 01 } /var/tmp/pmt.tmp // pmt file
#F: { 02 } /var/tmp/emm.info // key update log file
#F: { 03 } /var/tmp/ecm.info // ecm info file
#F: { 11 } /var/keys // folder for config files
#F: { 12 } /var/tmp // folder for temporary file
#F: { 13 } /var/tmp // folder for keyfiles
#F: { 21 } /dev/dvb/adapter0/ca0 // ca device
#F: { 22 } /dev/dvb/adapter0/dvr0 // dvr device
#F: { 23 } /dev/dvb/adapter0/demux0 // demux device
#F: { 31 } /dev/dvb/adapter0/ca1 // second ca device to write cw´s (recording)
#F: { 41 } /dev/sci0 // STB04xxx slot1
#F: { 42 } /dev/sci1 // STB04xxx slot2
#F: { 43 } /dev/tts/0 // rs232 com1
#F: { 44 } /dev/tts/1 // rs232 com2
F: { 23 } 10/dev/dvb/adapter0/demux0//demuxdevice

#gbox working mode
# 00 pure Emu
# 01 pure SoftCam (when card inside), Emu (when no card inside)
# 02 pure Net Client
# 03 Mixed mode !!!!! always use this !!!!!
G: { 03 }

# Display ECM messages on Konsole
# 00 don´t show any ECM´s
# 01 show only valid ECM´s
# 02 show valid and bad ECM´s with complete data display
C: { 01 }

# Display EMM messages on Konsole
# 00 don´t show any EMM´s
# 01 show only valid EMM´s
# 02 show valid and bad EMM´s with complete data display
# 1* Log any tier change on PW-Nagra-17xx cards into /var/keys/pwupdate.log
M: { 01 }

# AutoUpdate
# 00 is ignored (default)
# 01 enable AU
# 02 Auto AU !!!!! always use this !!!!!
A: { 02 }

# Key update
# 01 update only new keys, default setting
# 02 update all keys (used for valid PMK checking)
U: { 02 }

# Hash pids
# 00 hash all pids, DO NOT USE THIS OPTION, IT IS ONLY FOR TESTING STUFF
# 01 hash only pids with implemented algos and available keys !!!!! always use this
H: { 01 }

# Key files folder
# 00 keyfiles in /var/keys
# 01 keyfiles in /var/tmp
T: { 00 }

# On Screen Display for the Multysystemcam on com1/com2
# 00 No OSD (default)
# 01 display Smartcard messages in Neutrino
# 02 display Smartcard messages in Neutrino new nhttpd format
# 03 display Smartcard messages in Enigma
O: { 00 } 192.168.0.3

# Logger and NET-mode UDP port Init
# 00 do not init UDP port
# 01 Init UDP port for IP, port, UDP
L: { 01 } 192.168.2.18 8017

# Use SSSP over rs232 port
# a0 a=1 debug on, a=0 normal operatiuon
# 0b b=1 for com1, b=2 for com2

# Option for Seasons-Interface
W: { 00 00 } 9600

# *x ** ; x = device nummber to be used (0= default)
# D* ** ; force use of /proc/bus/gtx for cw write operations
(in the dbox2 the gbox writes directly the CW´s, 00 is the
recommended mode ! No drivers are required) use D* ** ONLY if
you have Problems. 0* ** should be prefered !!!
# F* ** ; write CW´s in both devices (used for PVR in STB04xxx devices)
# ** y* ; y=0001b (0x1*) use slot1 as Multicam (only on STB04xxx)
# ** y* ; y=0010b (0x2*) use slot2 as Multicam (only on STB04xxx)
# ** y* ; y=0011b (0x3*) use slot1 and slot2 as Multicams (only on STB04xxx)
# ** *z ; z=0001b (0x*1) use com1 as Multicam
# ** *z ; z=0010b (0x*2) use com2 as Multicam
# ** *z ; z=0011b (0x*3) use com1 and com2 as Multicams
# ** yz ; yz=00110011b (0x33) use slot1+slot2+com1+com2 as Multicams
# ** *z ; z=0100b (0x*4) invert CTS detection on com1
# ** *z ; z=1000b (0x* invert CTS detection on com2
# example: yz = 0x0A = 00001010 (use com2 with inverted CTS detection line)
V: { F0 30 }

B.T.
28.02.09, 18:29
und hats was gebracht?

teifun68
28.02.09, 20:20
und hats was gebracht?

keine Antwort ,ist auch eine Antwort.


:coole0059:

Stfi13
27.04.09, 10:35
ja es hat was gebracht

sorry das ich jetzt erst antworte aber ich war längere zeit nicht da .
PS:
danke estmal
es lag zum einen an der config selbst und zum anderen hatte ich einen bug
im script

mfg